Hello

This is a new installation on an Acer TravelMate 4050 with 256 MB RAM.

OS is Opensolaris snv_54 installed from 6 CD's (which install and boot on a desktop).

Boot hangs after 'Configuring devices'. Adding -arvk to the Grub boot line
shows that the hang/reboot occurs as follows:

uhci2 is /pci@0,0/pci1025,71@1d,2
cpu0: x86 (GenuineIntel family 6 model 13 step 6 clock 1600 MHz)
cpu0: Intel(r) Pentium(r) M processor 1.60 GHz
PCI-device: pci8086,2448@1e, pci_pci0
pci_pci0 is /pci@0,0/pci8086,2448@1e
PCI-device: pci1025,71@4, pcic0
pcic0 is /pci@0,0/pci8086,2448@1e/pci1025,71@4
/pci@0,0/pci8086,2448@1e/pci1025,71@4/pcs@0 (pcs0) online
PCI-device: pci1025,71@0, hci13940
hci13940 is /pci@0,0/pci8086,2448@1e/pci1025,71@0
Hostname: acer
UltraDMA mode 5 selected
dump on /dev/dsk/c0d0s1 size 596 MB
Configuring devices.
ATAPI device at targ 0, lun 0 lastlun 0xfffe
model HL-DT-STCD-RW/DVD DRIVE GCC-4243N
ATA/ATAPI-5 supported, majver 0x3c minver 0x13
PCI-device: ide@1, ata1
ata1 is /pci@0,0/pci-ide@1f,1/ide@1
MultiwordDMA mode 2 selected
MultiwordDMA mode 2 selected
MultiwordDMA mode 2 selected
sd0 at ata1: target 0 lun 0
sd0 is /pci@0,0/pci-ide@1f,1/ide@1/sd@0,0

<< hangs here

Any hints? TIA

You can have a look at the pages linked from that URL:
http://www.sun.com/bigadmin/features...resources.html

FWIW I managed to boot snv_54 when I reinstalled with only the first 4 install CD's. I don't know why. When I install the next CD (no. 5) it won't boot again. Go figure.