hi im new user
i have a LAN connection with enternet . in window xp it worked very fine but in Mandrake 10.0 the enternet is very slow.
my configuration is
-------------
ifconfig
eth0 Link encap:Ethernet HWaddr 4C:00:10:3C:06:39
inet addr:192.168.0.133 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::4e00:10ff:fe3c:639/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:98 errors:10 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9454 (9.2 Kb) TX bytes:2435 (2.3 Kb)
Interrupt:17 Base address:0x6f00

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:66 errors:0 dropped:0 overruns:0 frame:0
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4276 (4.1 Kb) TX bytes:4276 (4.1 Kb)
----------------------
lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 40)
00:14.0 USB Controller: VIA Technologies, Inc. USB (rev 50)
00:14.1 USB Controller: VIA Technologies, Inc. USB (rev 50)
00:14.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
-------------------------------
route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
-----------------------------------
Windows IP Configuration

Host Name . . . . . . . . . . . . : awad
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : REPOTEC RP-1624W 100Base-TX PCI Fast
Ethernet Adapter
Physical Address. . . . . . . . . : 4C-00-10-3C-06-39
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.133
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 69.50.166.94
---------------------------
can any one tell me what is the problem
thanks

post the contents of ur
/etc/resolv.conf
after u connected to the internet

if it is empty
then put

nameserver <ipaddress of ur DNS server>

regards

not empty
DNS servers

how many DNS servers entry do u have in linux and how do u see that ur internet speed is slow in linux

regards

i have 2 DNS
in windows the speed is 65 kbps
in mdk its only 1 kbps

hi there
what is ur gateway
it is running windows or linux???
if u r sharing this through a windows gateway then enable IP adress through DHCP in linux and try browsing.

regards