[slimg00dy@localhost ~]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.29.1.el6.x86_64 (mockbuild@c6b5.bsys.dev.centos.org) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Mon Jun 27 19:49:27 BST 2011
Command line: ro root=UUID=66a49b48-8f3a-457b-a463-808fefbb6503 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us nomodeset crashkernel=128M rhgb quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000097000 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfda0000 (usable)
 BIOS-e820: 00000000bfda0000 - 00000000bfdd1000 (ACPI NVS)
 BIOS-e820: 00000000bfdd1000 - 00000000bfe00000 (ACPI data)
 BIOS-e820: 00000000bfe00000 - 00000000bff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000043f000000 (usable)
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000BFE00000 mask FFFFFFE00000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
total RAM covered: 3070M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 4M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
e820 update range: 00000000bfe00000 - 000000043f000000 (usable) ==> (reserved)
WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13296MB of RAM.
update e820 for mtrr
modified physical RAM map:
 modified: 0000000000000000 - 0000000000001000 (reserved)
 modified: 0000000000001000 - 0000000000097000 (usable)
 modified: 000000000009f800 - 00000000000a0000 (reserved)
 modified: 00000000000f0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bfda0000 (usable)
 modified: 00000000bfda0000 - 00000000bfdd1000 (ACPI NVS)
 modified: 00000000bfdd1000 - 00000000bfe00000 (ACPI data)
 modified: 00000000bfe00000 - 00000000bff00000 (reserved)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 000000043f000000 (reserved)
last_pfn = 0xbfda0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bfda0000
 0000000000 - 0080000000 page 1G
 0080000000 - 00bfc00000 page 2M
 00bfc00000 - 00bfda0000 page 4k
kernel direct mapping tables up to bfda0000 @ 8000-b000
RAMDISK: 372b8000 - 37fef15d
ACPI: RSDP 00000000000f6a90 00014 (v00 GBT   )
ACPI: RSDT 00000000bfdd1000 0004C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000bfdd1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000bfdd1100 07997 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000bfda0000 00040
ACPI: MSDM 00000000bfdd8b80 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000bfdd8c00 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000bfdd8c40 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000bfdd8cc0 00034 (v01 GBT             00000000      00000000)
ACPI: TAMG 00000000bfdd8d30 00202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 00000000bfdd8ac0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000bfdd8f40 0648F (v01        MATS RCM 80000001 INTL 20061109)
ACPI: SSDT 00000000bfddf440 01714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: IVRS 00000000bfde0bd0 000F0 (v01  AMD     RD890S 00202031 AMD  00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bfda0000
Bootmem setup node 0 0000000000000000-00000000bfda0000
  NODE_DATA [000000000000a000 - 000000000003dfff]
  bootmap [000000000003e000 -  0000000000055fb7] pages 18
(7 early reservations) ==> bootmem [0000000000 - 00bfda0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0001ca0ff8]    TEXT DATA BSS ==> [0001000000 - 0001ca0ff8]
  #3 [00372b8000 - 0037fef15d]          RAMDISK ==> [00372b8000 - 0037fef15d]
  #4 [0000097000 - 0000100000]    BIOS reserved ==> [0000097000 - 0000100000]
  #5 [0001ca1000 - 0001ca10fe]              BRK ==> [0001ca1000 - 0001ca10fe]
  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
found SMP MP-table at [ffff8800000f4b70] f4b70
Reserving 128MB of memory at 32MB for crashkernel (System RAM: 3069MB)
 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff88000a600000-ffff88000cffffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x00000097
    0: 0x00000100 -> 0x000bfda0
On node 0 totalpages: 785718
  DMA zone: 56 pages used for memmap
  DMA zone: 110 pages reserved
  DMA zone: 3824 pages, LIFO batch:0
  DMA32 zone: 10688 pages used for memmap
  DMA32 zone: 771040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000

SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88000a200000 s95064 r8192 d23720 u262144
pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 774864
Policy zone: DMA32
Kernel command line: ro root=UUID=66a49b48-8f3a-457b-a463-808fefbb6503 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us nomodeset crashkernel=128M rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 2940824k/3143296k available (4939k kernel code, 424k absent, 202048k reserved, 3931k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 31457280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 3422.541 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6241.08 BogoMIPS (lpj=3120542)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20293 entries in 80 pages
Setting APIC routing to flat
NMI watchdog: CPU not supported
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD FX(tm)-8120 Eight-Core Processor            stepping 02
APIC timer registered as dummy, due to nmi_watchdog=1!
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (49933.43 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [TAMG] - 45, should be 44 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24 32bit mmio: [0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: reg 10 32bit mmio: [0xfdffe000-0xfdffefff]
pci 0000:00:12.2: reg 10 32bit mmio: [0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xfdffc000-0xfdffcfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.2: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10 32bit mmio: [0xfdffa000-0xfdffafff]
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.3: supports D1 D2
pci 0000:00:16.0: reg 10 32bit mmio: [0xfdff9000-0xfdff9fff]
pci 0000:00:16.2: reg 10 32bit mmio: [0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfd1f8000-0xfd1fffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:09.0: bridge 32bit mmio: [0xfd100000-0xfd1fffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
pci 0000:03:00.0: reg 10 io port: [0xef00-0xef07]
pci 0000:03:00.0: reg 14 io port: [0xee00-0xee03]
pci 0000:03:00.0: reg 18 io port: [0xed00-0xed07]
pci 0000:03:00.0: reg 1c io port: [0xec00-0xec03]
pci 0000:03:00.0: reg 20 io port: [0xeb00-0xeb0f]
pci 0000:03:00.0: reg 24 32bit mmio: [0xfdbff000-0xfdbff1ff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:0a.0: bridge io port: [0xe000-0xefff]
pci 0000:00:0a.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfd200000-0xfd2fffff]
pci 0000:04:06.0: reg 10 io port: [0xbc00-0xbcff]
pci 0000:04:06.0: reg 14 32bit mmio: [0xfddff000-0xfddff0ff]
pci 0000:04:06.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:04:06.0: supports D1 D2
pci 0000:04:06.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:06.0: PME# disabled
pci 0000:04:0e.0: reg 10 32bit mmio: [0xfddfe000-0xfddfe7ff]
pci 0000:04:0e.0: reg 14 io port: [0xbf00-0xbf7f]
pci 0000:04:0e.0: supports D2
pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:04:0e.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xb000-0xbfff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff]
pci 0000:05:00.0: reg 10 io port: [0xae00-0xaeff]
pci 0000:05:00.0: reg 18 64bit mmio pref: [0xfd9ff000-0xfd9fffff]
pci 0000:05:00.0: reg 20 64bit mmio pref: [0xfd9f8000-0xfd9fbfff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:15.0: bridge io port: [0xa000-0xafff]
pci 0000:00:15.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
pci 0000:00:15.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
pci 0000:06:00.0: reg 10 64bit mmio: [0xfd8f8000-0xfd8fffff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:15.1: bridge io port: [0x9000-0x9fff]
pci 0000:00:15.1: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
pci 0000:00:15.1: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
pci 0000:00:15.2: bridge io port: [0x8000-0x8fff]
pci 0000:00:15.2: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
pci 0000:00:15.2: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff]
pci 0000:00:15.3: bridge io port: [0x7000-0x7fff]
pci 0000:00:15.3: bridge 32bit mmio: [0xfd400000-0xfd4fffff]
pci 0000:00:15.3: bridge 64bit mmio pref: [0xfd300000-0xfd3fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
pci 0000:00:00.0: BAR 3: can't allocate resource
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0a: mem resource (0xd4400-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0x100000-0xbfd9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x220-0x225 has been reserved
system 00:01: ioport range 0x290-0x294 has been reserved
system 00:02: ioport range 0x900-0x91f has been reserved
system 00:02: ioport range 0x228-0x22f has been reserved
system 00:02: ioport range 0x40b-0x40b has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:02: ioport range 0xc00-0xc01 has been reserved
system 00:02: ioport range 0xc14-0xc14 has been reserved
system 00:02: ioport range 0xc50-0xc52 has been reserved
system 00:02: ioport range 0xc6c-0xc6d has been reserved
system 00:02: ioport range 0xc6f-0xc6f has been reserved
system 00:02: ioport range 0xcd0-0xcd1 has been reserved
system 00:02: ioport range 0xcd2-0xcd3 has been reserved
system 00:02: ioport range 0xcd4-0xcdf has been reserved
system 00:02: ioport range 0x800-0x8fe has been reserved
system 00:02: ioport range 0xa10-0xa17 has been reserved
system 00:02: ioport range 0xb00-0xb0f has been reserved
system 00:02: ioport range 0xb10-0xb1f has been reserved
system 00:02: ioport range 0xb20-0xb3f has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0a: iomem range 0xbfda0000-0xbfdfffff could not be reserved
system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0a: iomem range 0xbfe00000-0xbfefffff has been reserved
system 00:0a: iomem range 0xbff00000-0xbfffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0:   bridge window [0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [0xf8000000-0xfbffffff]
pci 0000:00:02.0:   bridge window [0xc0000000-0xdfffffff]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0:   bridge window [0xc000-0xcfff]
pci 0000:00:09.0:   bridge window [0xfd100000-0xfd1fffff]
pci 0000:00:09.0:   bridge window [0xfde00000-0xfdefffff]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0a.0:   bridge window [0xe000-0xefff]
pci 0000:00:0a.0:   bridge window [0xfdb00000-0xfdbfffff]
pci 0000:00:0a.0:   bridge window [0xfd200000-0xfd2fffff]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
pci 0000:00:14.4:   bridge window [0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [0xfdd00000-0xfddfffff]
pci 0000:00:14.4:   bridge window [0xfdc00000-0xfdcfffff]
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.0: PCI bridge, secondary bus 0000:05
pci 0000:00:15.0:   bridge window [0xa000-0xafff]
pci 0000:00:15.0:   bridge window [0xfda00000-0xfdafffff]
pci 0000:00:15.0:   bridge window [0xfd900000-0xfd9fffff]
pci 0000:00:15.1: PCI bridge to [bus 06-06]
pci 0000:00:15.1: PCI bridge, secondary bus 0000:06
pci 0000:00:15.1:   bridge window [0x9000-0x9fff]
pci 0000:00:15.1:   bridge window [0xfd800000-0xfd8fffff]
pci 0000:00:15.1:   bridge window [0xfd700000-0xfd7fffff]
pci 0000:00:15.2: PCI bridge to [bus 07-07]
pci 0000:00:15.2: PCI bridge, secondary bus 0000:07
pci 0000:00:15.2:   bridge window [0x8000-0x8fff]
pci 0000:00:15.2:   bridge window [0xfd600000-0xfd6fffff]
pci 0000:00:15.2:   bridge window [0xfd500000-0xfd5fffff]
pci 0000:00:15.3: PCI bridge to [bus 08-08]
pci 0000:00:15.3: PCI bridge, secondary bus 0000:08
pci 0000:00:15.3:   bridge window [0x7000-0x7fff]
pci 0000:00:15.3:   bridge window [0xfd400000-0xfd4fffff]
pci 0000:00:15.3:   bridge window [0xfd300000-0xfd3fffff]
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.0: setting latency timer to 64
pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.1: setting latency timer to 64
pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.2: setting latency timer to 64
pci 0000:00:15.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.3: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:02: resource 1 mem: [0xfd100000-0xfd1fffff]
pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff]
pci_bus 0000:03: resource 2 pref mem [0xfd200000-0xfd2fffff]
pci_bus 0000:04: resource 0 io:  [0xb000-0xbfff]
pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:04: resource 2 pref mem [0xfdc00000-0xfdcfffff]
pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:05: resource 0 io:  [0xa000-0xafff]
pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff]
pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff]
pci_bus 0000:06: resource 0 io:  [0x9000-0x9fff]
pci_bus 0000:06: resource 1 mem: [0xfd800000-0xfd8fffff]
pci_bus 0000:06: resource 2 pref mem [0xfd700000-0xfd7fffff]
pci_bus 0000:07: resource 0 io:  [0x8000-0x8fff]
pci_bus 0000:07: resource 1 mem: [0xfd600000-0xfd6fffff]
pci_bus 0000:07: resource 2 pref mem [0xfd500000-0xfd5fffff]
pci_bus 0000:08: resource 0 io:  [0x7000-0x7fff]
pci_bus 0000:08: resource 1 mem: [0xfd400000-0xfd4fffff]
pci_bus 0000:08: resource 2 pref mem [0xfd300000-0xfd3fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13532k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1321592669.883:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5770
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 965331713A640F69
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:09.0: irq 25 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:15.0: irq 27 for MSI/MSI-X
pcieport 0000:00:15.0: setting latency timer to 64
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:15.1: irq 28 for MSI/MSI-X
pcieport 0000:00:15.1: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:15.2: irq 29 for MSI/MSI-X
pcieport 0000:00:15.2: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:15.3: irq 30 for MSI/MSI-X
pcieport 0000:00:15.3: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode: lapic is not functional.
 lapic is not functional.
 lapic is not functional.
Could not switch to high resolution mode on CPU 5
Could not switch to high resolution mode on CPU 6
Could not switch to high resolution mode on CPU 7
 lapic is not functional.
Could not switch to high resolution mode on CPU 4
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode: lapic is not functional.
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode:
Could not switch to high resolution mode on CPU 2
 lapic is not functional.
 lapic is not functional.
Could not switch to high resolution mode on CPU 1
Could not switch to high resolution mode on CPU 3
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2011-11-18 05:04:31 UTC (1321592671)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7184k
dracut: dracut-004-33.2.el6_0
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
usb 4-2: new low speed USB device using ohci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092880a2)
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
pata_acpi 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
ahci 0000:00:11.0: version 3.0
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 19
usb 4-2: New USB device found, idVendor=046d, idProduct=c517
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Receiver
usb 4-2: Manufacturer: Logitech
usb 4-2: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input3
logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input4
logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input1
usb 4-3: new low speed USB device using ohci_hcd and address 3
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 4-3: New USB device found, idVendor=046d, idProduct=c01b
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB-PS/2 Optical Mouse
usb 4-3: Manufacturer: Logitech
usb 4-3: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input5
generic-usb 0003:046D:C01B.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100, ATAPI AN
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: HPA detected: current 62531183, native 62533296
ata4.00: ATA-8: OCZ-VERTEX, 1.4, max UDMA/133
ata4.00: 62531183 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata4.00: configured for UDMA/133
ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata1.00: HPA detected: current 976771055, native 976773168
ata1.00: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133
ata1.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5001AALS-0 01.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203N  SB01 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access     ATA      OCZ-VERTEX       1.4  PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] 62531183 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
 sdb:
 sdc: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
 sdc1 sdc2 sdc3
sd 3:0:0:0: [sdc] Attached SCSI disk
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI version 1.10
firewire_core: created device fw0: GUID 0049e550dd800200, S400
EXT4-fs (sdc2): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sdc2
dracut: Loading SELinux policy
type=1404 audit(1321592678.034:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 200977 rules.
SELinux: 2048 avtab hash slots, 200977 rules.
SELinux:  9 users, 13 roles, 3327 types, 173 bools, 1 sens, 1024 cats
SELinux:  77 classes, 200977 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sdc2, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1321592678.300:3): policy loaded auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
readahead: starting
udev: starting version 147
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: ALC889: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
r8169 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
r8169 0000:04:06.0: no PCI Express capability
eth0: RTL8169sb/8110sb at 0xffffc90015a76000, 00:14:d1:1d:9c:dd, XID 10000000 IRQ 20
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: unknown MAC, using family default
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
r8169 0000:05:00.0: irq 31 for MSI/MSI-X
eth1: RTL8168b/8111b at 0xffffc90015a7a000, 50:e5:49:53:3e:b3, XID 0c900800 IRQ 31
udev: renamed network interface eth1 to eth1-eth0
udev: renamed network interface eth0 to eth1
udev: renamed network interface eth1-eth0 to eth0
ACPI: WMI: Mapper loaded
EXT4-fs (sdc1): mounted filesystem with ordered data mode
SELinux: initialized (dev sdc1, type ext4), uses xattr
EXT4-fs (sdb1): mounted filesystem with ordered data mode
SELinux: initialized (dev sdb1, type ext4), uses xattr
EXT4-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 4194296k swap on /dev/sdc3.  Priority:-1 extents:1 across:4194296k SSD
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:05:00.0: eth0: link up
r8169 0000:05:00.0: eth0: link up
powernow-k8: Found 1 AMD FX(tm)-8120 Eight-Core Processor            processors (8 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (3100 MHz)
powernow-k8:    1 : pstate 1 (2800 MHz)
powernow-k8:    2 : pstate 2 (2300 MHz)
powernow-k8:    3 : pstate 3 (1900 MHz)
powernow-k8:    4 : pstate 4 (1400 MHz)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
it87: Found IT8720F chip at 0x228, revision 8
it87: in3 is VCC (+5V)
hwmon-vid: Unknown VRM version of your x86 CPU
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
fuse init (API version 7.13)
cdrom: sr0: mrw address space DMA selected
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
type=1400 audit(1321608133.143:4): avc:  denied  { getattr } for  pid=3780 comm="updatedb" path="/mnt/500GB/.Trash-slimg00dy" dev=sda1 ino=17825793 scontext=system_u:system_r:locate_t:s0-s0:c0.c1023 tcontext=user_u:object_r:unlabeled_t:s0 tclass=dir

[slimg00dy@slimg00dy ~]$ free -m
             total       used       free     shared    buffers     cached
Mem:         15969       1866      14102          0        188        756
-/+ buffers/cache:        921      15048
Swap:         3999          0       3999
[slimg00dy@slimg00dy ~]$