LinuxQuestions.org
Latest LQ Deal: Complete CCNA, CCNP & Red Hat Certification Training Bundle
Go Back   LinuxQuestions.org > Forums > Other *NIX Forums > Solaris / OpenSolaris
User Name
Password
Solaris / OpenSolaris This forum is for the discussion of Solaris, OpenSolaris, OpenIndiana, and illumos.
General Sun, SunOS and Sparc related questions also go here. Any Solaris fork or distribution is welcome.

Notices


Reply
  Search this Thread
Old 01-12-2006, 11:38 AM   #1
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Rep: Reputation: 15
Question Solaris 9 x86 12/02 (U2) upgrade to (U7)


I am currently working with a robust Solaris 9 x86 12/02 (U2).
The new JDS2 is stated to work with Solaris 9 x86 (U7).
Is there a way to upgrade the this older, very stable version to the new version to use JDS2?
I have tried to use the install and DCA diskette to get a good setup of the new 9 x86, but each time it fails.
I was thinking if I could get the solid 12/02 build loaded and then just patch or update my way up to the U7 version. ( I have not seen it referred to as other than U7.)
Suggestions please.
 
Old 01-12-2006, 02:57 PM   #2
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.3, Oracle Linux, Mint, Tribblix
Posts: 9,749

Rep: Reputation: 457Reputation: 457Reputation: 457Reputation: 457Reputation: 457
Sorry I've no experience with JDS on Solaris 9.

That said every Solaris 9 build/update is rock solid, and Solaris 10 is just even more, so I still encourage you to upgrade to the last Solaris 10 release 01/06), with which all that problematic x86 DCA stuff has been removed.

Solaris guarantee upward compatibility, so the risk is pretty low your scripts fail on Solaris 10, but of course you need to validate that on some kind of test/staging platform, being in a production environment.
 
Old 01-13-2006, 04:33 PM   #3
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
Yes sir, I will take your advice.
I will post with results of the load.
Thank You for opinion an guidance.
 
Old 01-14-2006, 03:21 PM   #4
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
I have been able to successfully load the Sun Solaris 10 x86.
I used the Solaris Interactive installation.
The only error I experience is that the very end.
I get the boot loader and select the active Solaris 10 x86 partition and it re-launches back into a setup for installation.
I have tried two custom installs for making various slice sizes on my own (like I would for a SPARC install).
I have tried two default installs.
All have gone back to this attempt to re-install the system. I have no DCA boot diskette attached and I after the last screen that calls for a "reboot" I remove the the cd as instructed.
Suggestions please.
Thank You.
 
Old 01-14-2006, 10:56 PM   #5
technopark02
Member
 
Registered: Feb 2005
Distribution: Solaris 8 - 11, JDS Linux 3.0
Posts: 99

Rep: Reputation: 15
If you are using regular CDs:
--
Did you install the software from all the disks (4 or 5 disks)?

Quick note #1:
Once the installation from CD #1 is complete, system boots up from the hard disk; and it may appear that it is not going to ask for CD #2. We just have to be patient, and wait for it to ask us for CD #2.

If you are using a DVD:
--
It is very likely that you might have selected some software (essentialy freeware) to install as part of the custom installation. Sun offers this freeware as a companion CD, that you can download the image from: http://www.sun.com/software/solaris/...10download.xml. Perhaps the installer is looking for this companion CD. If that's the case, it is as simply as downloading the companion CD image and letting the installer move forward is the way to go.

Quick Note #2:
If the companion CD image is on the hard disk, you need not burn it into a CD; but can be mounted on a loopback file device with the help of lofiadm tool. This can be done while the installer is waiting for the CD or path to the setup file {in companion CD} on local/remote disk. Instructions of this web page may help you mount the image on loopback device:
http://technopark02.blogspot.com/200...-image-on.html
 
Old 01-15-2006, 09:50 PM   #6
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
Thank You.
Here is the status thus far:
• I re-burned the “.iso” files to new disks. This finally allowed the start-up and interactive installation to actually follow the documents from SUN on Basic Installation of the SUN Solaris 10 x86 Operating System. For whatever reason, the "Companion CD" for 10 x86 would not install was skipped. ( I will go back in further post work and review the CD to see if it a readable error or what.)

• The video "drivers" that came with the installation would not configure after all 4 disks were loaded. I tried various drivers for the ATI Mobility card that came installed in this Dell Inspiron 4000. (It is listed on the HCL as being compatible with this OS.) I tried the Xig Summit drivers I had for the 9 x86 version. They failed. I went to the Xig Summit site and downloaded the compliant drivers for 10 x86 and the Dell latop. They work. There is a fee for them, but well worth it. I like the fact I got to try them to make sure they worked before purchasing them.

• jlliagre wote to me "That said every Solaris 9 build/update is rock solid, and Solaris 10 is just even more, so I still encourage you to upgrade to the last Solaris 10 release 01/06), with which all that problematic x86 DCA stuff has been removed.

Solaris guarantee upward compatibility, so the risk is pretty low your scripts fail on Solaris 10, but of course you need to validate that on some kind of test/staging platform, being in a production environment."

• This was gospel. The errors were meida driven for the most part. I switched from TDK media to Memorex and the problems went away, for the most part, in the installation. The video drivers... irratating; but, surmountable.

• For whatever reason now, I cannot get the system to ceoonect tothe internet. I have secure shelled over to a Soalris 9 SPARC Sun Unltra 60... no problem. I have made SMBmount connections to a Windows 2000 Server... no problem. Connect to the internet... nothing.

I have looked at:
/etc/defaultrouter; /etc/hosts; /etc/hostname.xxxx; /etc/nsswitch.conf & .dns; /etc/resolv.conf; /etc/netmasks.
I am running a hub and router between me and the cable modem. I am using the 192.168.1.x assocaited with the 2nd version for the Linksys router family. I touch all in the internal, but not the net.

Suggestions Welcome... and thank you jlliagre Senior Member, Merci.
 
Old 01-15-2006, 09:51 PM   #7
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
P.S. Forgive the lack of spellcheck... long, ugly day.
Armor
 
Old 01-16-2006, 04:31 AM   #8
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.3, Oracle Linux, Mint, Tribblix
Posts: 9,749

Rep: Reputation: 457Reputation: 457Reputation: 457Reputation: 457Reputation: 457
Have you tested both Xorg and Xsun for your X11 driver issue ?

Quote:
I have looked at:
/etc/defaultrouter; /etc/hosts; /etc/hostname.xxxx; /etc/nsswitch.conf & .dns; /etc/resolv.conf; /etc/netmasks.
Double check, or post these files and "netstat -rn" output.
 
Old 01-16-2006, 09:45 AM   #9
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
I was able to log-on and get on the net this morning. I am not sure why. I would go into it in more depth, but I have a new demon.

The system kicks me out after several minutes like there is a display saver setting running. I get sent back out to the log-in banner and have to start over.

I am trying to research the "power savings" settings and "screen saver" settings.

Here is the "netstat -rn":
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ------ ---------
192.168.1.0 192.168.1.143 U 1 2 iprb0
224.0.0.0 192.168.1.143 U 1 0 iprb0
default 192.168.1.1 UG 1 9
127.0.0.1 127.0.0.1 UH 4 95 lo0

I will take this up again on the Windows box. I am not sure what the time interval between resets are.

Thank You.
 
Old 01-16-2006, 11:49 AM   #10
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.3, Oracle Linux, Mint, Tribblix
Posts: 9,749

Rep: Reputation: 457Reputation: 457Reputation: 457Reputation: 457Reputation: 457
Is this happening with both JDS and CDE ?
 
Old 01-16-2006, 05:29 PM   #11
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
So far just the JDS. Since, I was using the Fedora Core 4 w/ GNOME for so long, I tend to gravitate to the JDS for everyday work. I use the CDE to work at development items that I need for my job.
I will use the CDE for awhile and find out.
Do you still want to see the "etc" files or just go with the "luck"? Your call.
I am going to keep trying to find out about the screen resets.
Thank You.
 
Old 01-16-2006, 06:05 PM   #12
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
To answer your question "yes". It just happened to me while I was doing an "append" to a flat text file of all the "etc" files you wanted to look at. I am on the CDE side and as I was going from one work space to the other; I touched the mouse and was sent back to the log-in banner. I was not idle, I was typing and using the mouse. hmmm...

On the "Application Manager - Desk Top Controls" the "Window Style Manager" is set for 15 minutes before launching a screen saver. "Power Management" is "on". I still should not get a "screen saver" if I am typing or moving the mouse.

On a re-boot, I went into the BIOS and disabled the "Power Management" settings for when the system is connected to A/C power. Currently, only battery operations has any say in the power settings and management.

Suggestions?
Thank You.
 
Old 01-18-2006, 03:29 AM   #13
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.3, Oracle Linux, Mint, Tribblix
Posts: 9,749

Rep: Reputation: 457Reputation: 457Reputation: 457Reputation: 457Reputation: 457
What about the X server logs ?
Mine are going to /var/log/Xorg.0.log, your mileage may vary.
 
Old 01-18-2006, 05:17 PM   #14
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
Sir, (I hope you are a sir.)

I was able to dot a "cat" on the "/var/log/Xorg.0.log" and th "Xsun.0.log" and did a redirect (>) to a text file in my "Documents" folder. Since, I was working in the JDS desktop, I did an SMB mount through the application "Network Places". This I did a "drag and drop" to move the files to a share on my Window Server.


Output /var/log/Xorg.0.log: (This is a long output. Part 1)

********** Start Output **********

X Window System Version 6.8.2 (Sun Xorg Release 1.1 for Solaris 10)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SunOS 5.10 Generic i86pc
Current Operating System: SunOS Dienst 5.10 Generic_118844-26 i86pc
Build Date: 09 September 2005
SUNWxorg-server package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-server patches applied: 118966-11 119062-01
SUNWxorg-graphics-ddx package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-graphics-ddx patches applied: 118966-11
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 15 14:24:03 2006
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on solaris
(II) LoadModule: "bitmap"
(II) Loading /usr/X11/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 104c,ac51 card 0000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:03:1: chip 104c,ac51 card 0000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 125d,1998 card 1028,00b0 rev 10 class 04,01,00 hdr 00
(II) PCI: 00:10:0: chip 1668,0100 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 01:00:0: chip 1002,4c46 card 1028,00b0 rev 02 class 03,00,00 hdr 00
(II) PCI: 08:04:0: chip 8086,1229 card 1668,1100 rev 08 class 02,00,00 hdr 00
(II) PCI: 08:08:0: chip 11c1,0448 card 1668,2400 rev 01 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,8), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfd000000 - 0xfeffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (0:3:0), (0,4,4), BCTRL: 0x0740 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 5: bridge is at (0:3:1), (0,5,5), BCTRL: 0x0740 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:16:0), (0,8,8), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 8 non-prefetchable memory range:
[0] -1 0 0xfb000000 - 0xfcffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility M3 AGP 2x rev 2, Mem @ 0xf4000000/26, 0xfdffc000/14, I/O @ 0xec00/8
List of video drivers:
atimisc
r128
radeon
mga
glint
nv
tga
s3
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
i128
nsc
i810
ati
ark
cyrix
siliconmotion
via
vesa
vga
dummy
(II) LoadModule: "atimisc"
(II) Loading /usr/X11/lib/modules/drivers/atimisc_drv.so
(II) Module atimisc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "r128"
(II) Loading /usr/X11/lib/modules/drivers/r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "radeon"
(II) Loading /usr/X11/lib/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mga"
(II) Loading /usr/X11/lib/modules/drivers/mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "glint"
(II) Loading /usr/X11/lib/modules/drivers/glint_drv.so
(II) Module glint: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "nv"
(II) Loading /usr/X11/lib/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tga"
(II) Loading /usr/X11/lib/modules/drivers/tga_drv.so
(II) Module tga: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "s3"
(II) Loading /usr/X11/lib/modules/drivers/s3_drv.so
(II) Module s3: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.3.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "s3virge"
(II) Loading /usr/X11/lib/modules/drivers/s3virge_drv.so
(II) Module s3virge: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.8.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "sis"
(II) Loading /usr/X11/lib/modules/drivers/sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "rendition"
(II) Loading /usr/X11/lib/modules/drivers/rendition_drv.so
(II) Module rendition: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 4.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "neomagic"
(II) Loading /usr/X11/lib/modules/drivers/neomagic_drv.so
(II) Module neomagic: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i740"
(II) Loading /usr/X11/lib/modules/drivers/i740_drv.so
(II) Module i740: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tdfx"
(II) Loading /usr/X11/lib/modules/drivers/tdfx_drv.so
(II) Module tdfx: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "savage"
(II) Loading /usr/X11/lib/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.1.27
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "cirrus"
(II) Loading /usr/X11/lib/modules/drivers/cirrus_drv.so
(II) Module cirrus: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vmware"
(II) Loading /usr/X11/lib/modules/drivers/vmware_drv.so
(II) Module vmware: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 10.10.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tseng"
(II) Loading /usr/X11/lib/modules/drivers/tseng_drv.so
(II) Module tseng: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "trident"
(II) Loading /usr/X11/lib/modules/drivers/trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "chips"
(II) Loading /usr/X11/lib/modules/drivers/chips_drv.so
(II) Module chips: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "apm"
(II) Loading /usr/X11/lib/modules/drivers/apm_drv.so
(II) Module apm: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i128"
(II) Loading /usr/X11/lib/modules/drivers/i128_drv.so
(II) Module i128: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "nsc"
(II) Loading /usr/X11/lib/modules/drivers/nsc_drv.so
(II) Module nsc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 2.7.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i810"
(II) Loading /usr/X11/lib/modules/drivers/i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/X11/lib/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ark"
(II) Loading /usr/X11/lib/modules/drivers/ark_drv.so
(II) Module ark: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.5.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "cyrix"
(II) Loading /usr/X11/lib/modules/drivers/cyrix_drv.so
(II) Module cyrix: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "siliconmotion"
(II) Loading /usr/X11/lib/modules/drivers/siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.3.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "via"
(II) Loading /usr/X11/lib/modules/drivers/via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 4.1.30
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vesa"
(II) Loading /usr/X11/lib/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vga"
(II) Loading /usr/X11/lib/modules/drivers/vga_drv.so
(II) Module vga: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 4.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "dummy"
(II) Loading /usr/X11/lib/modules/drivers/dummy_drv.so
(II) Module dummy: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
 
Old 01-18-2006, 05:19 PM   #15
Armor
Member
 
Registered: Jul 2004
Location: MidWest
Distribution: CentOS 6 | Xunbuntu
Posts: 55

Original Poster
Rep: Reputation: 15
Output /var/log/Xorg.0.log: (Part 2)

Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xffffffff to 0xefffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfbffec00 - 0xfbffefff (0x400) MX[B]E
[1] -1 0 0xfbe00000 - 0xfbffffff (0x200000) MX[B]E
[2] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B]E
[3] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[B]E
[4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]EO
[5] -1 0 0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
[6] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[8] -1 0 0x0000dcb8 - 0x0000dcbf (0x8) IX[B]E
[9] -1 0 0x0000dcc0 - 0x0000dcff (0x40) IX[B]E
[10] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[11] -1 0 0x0000cce0 - 0x0000ccff (0x20) IX[B]E
[12] -1 0 0x00000860 - 0x0000087f (0x20) IX[B]E
[13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0xfbe00000 from 0xfbffffff to 0xfbefffff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfbffec00 - 0xfbffefff (0x400) MX[B]E
[1] -1 0 0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
[2] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B]E
[3] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[B]E
[4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]EO
[5] -1 0 0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
[6] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[8] -1 0 0x0000dcb8 - 0x0000dcbf (0x8) IX[B]E
[9] -1 0 0x0000dcc0 - 0x0000dcff (0x40) IX[B]E
[10] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[11] -1 0 0x0000cce0 - 0x0000ccff (0x20) IX[B]E
[12] -1 0 0x00000860 - 0x0000087f (0x20) IX[B]E
[13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfbffec00 - 0xfbffefff (0x400) MX[B]E
[6] -1 0 0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
[7] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B]E
[8] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[B]E
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]EO
[10] -1 0 0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
[11] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[15] -1 0 0x0000dcb8 - 0x0000dcbf (0x8) IX[B]E
[16] -1 0 0x0000dcc0 - 0x0000dcff (0x40) IX[B]E
[17] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[18] -1 0 0x0000cce0 - 0x0000ccff (0x20) IX[B]E
[19] -1 0 0x00000860 - 0x0000087f (0x20) IX[B]E
[20] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "cirrus_laguna"
(II) LoadModule: "cirrus_laguna"
(II) Loading /usr/X11/lib/modules/drivers/cirrus_laguna.so
(II) Module cirrus_laguna: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/X11/lib/modules/drivers/cirrus_alpine.so
(II) Module cirrus_alpine: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE)
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(++) Using config file: "//xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11/lib/X11/fonts/TrueType/,/usr/X11/lib/X11/fonts/Type1/,/usr/X11/lib/X11/fonts/Type1/sun/,/usr/X11/lib/X11/fonts/F3bitmaps/,/usr/X11/lib/X11/fonts/misc/,/usr/X11/lib/X11/fonts/100dpi/,/usr/X11/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11/lib/X11/rgb"
(**) ModulePath set to "/usr/X11/lib/modules"
(II) ATI: Candidate "Device" section "Card0".
(--) Chipset ATI Rage 128 Mobility M3 LF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/X11/lib/modules/drivers/r128_drv.so
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfbffec00 - 0xfbffefff (0x400) MX[B]E
[6] -1 0 0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
[7] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B]E
[8] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[B]E
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]EO
[10] -1 0 0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
[11] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[15] -1 0 0x0000dcb8 - 0x0000dcbf (0x8) IX[B]E
[16] -1 0 0x0000dcc0 - 0x0000dcff (0x40) IX[B]E
[17] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[18] -1 0 0x0000cce0 - 0x0000ccff (0x20) IX[B]E
[19] -1 0 0x00000860 - 0x0000087f (0x20) IX[B]E
[20] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfbffec00 - 0xfbffefff (0x400) MX[B]E
[6] -1 0 0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
[7] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B]E
[8] -1 0 0xf9ffe000 - 0xf9ffffff (0x2000) MX[B]E
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]EO
[10] -1 0 0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
[11] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[18] -1 0 0x0000dcb8 - 0x0000dcbf (0x8) IX[B]E
[19] -1 0 0x0000dcc0 - 0x0000dcff (0x40) IX[B]E
[20] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[21] -1 0 0x0000cce0 - 0x0000ccff (0x20) IX[B]E
[22] -1 0 0x00000860 - 0x0000087f (0x20) IX[B]E
[23] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11/lib/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) R128(0): initializing int10
(WW) xf86LinearVidMem: failed to open /dev/fbs/aperture (No such file or directory)
(WW) xf86LinearVidMem: either /dev/fbs/aperture or /dev/xsvc device driver required
(WW) xf86LinearVidMem: linear memory access disabled

Fatal server error:
xf86MapVidMem: no aperture device
Please refer to your Operating System Vendor support pages

at http://sunsolve.sun.com/ for support on this crash.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

********** End Output **********

THis is just plain scary.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
great solaris website for newbies http://solaris-x86.org/ feetyouwell Solaris / OpenSolaris 2 12-06-2006 12:14 AM
vncserver for solaris x86? szehanz Solaris / OpenSolaris 3 04-26-2005 12:33 PM
Solaris 10 on x86 laptop VertX Solaris / OpenSolaris 3 01-16-2005 10:10 AM
solaris on an x86 Robert0380 Solaris / OpenSolaris 6 08-29-2003 02:34 AM

LinuxQuestions.org > Forums > Other *NIX Forums > Solaris / OpenSolaris

All times are GMT -5. The time now is 03:58 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration