opescad fail to compile [solved]

adcdam · 04-28-2021, 06:41 PM

i edited the very very old slackbuild from 2015
I Downloaded the 2021.01 sources
but it fail to compile it say

|
make: *** [Makefile:3049: objects/src/scadapi.o] Error 1

anyone can check why it fail?

Code:

#!/bin/sh

# Slackware build script for OpenSCAD

# Copyright 2013 David Spencer, Baildon, West Yorkshire, U.K.
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

PRGNAM=openscad
VERSION=${VERSION:-2021.01}
BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}

if [ -z "$ARCH" ]; then
  case "$( uname -m )" in
    i?86) ARCH=i486 ;;
    arm*) ARCH=arm ;;
       *) ARCH=$( uname -m ) ;;
  esac
fi

CWD=$(pwd)
TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "i686" ]; then
  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -fPIC"
  LIBDIRSUFFIX="64"
else
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
fi

set -e

rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf $PRGNAM-$VERSION
tar xvf $CWD/$PRGNAM-$VERSION.src.tar.gz
cd $PRGNAM-$VERSION
chown -R root:root .
find -L . \
 \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
 -exec chmod 755 {} \; -o \
 \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
 -exec chmod 644 {} \;

qmake -recursive openscad.pro \
  PREFIX=/usr \
  QMAKE_CFLAGS="$SLKCFLAGS" \
  QMAKE_CXXFLAGS="$SLKCFLAGS"
make -j12
make install INSTALL_ROOT=$PKG
sed -i 's/bool convex = ps->convexValue();/bool convex = (bool) ps->convexValue();/g' src/CSGTermEvaluator.cc
sed -i '50a#include <stack>' src/parser.y


find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

mv $PKG/usr/share/man $PKG/usr/man
find $PKG/usr/man -type f -exec gzip -9 {} \;
for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done

mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a \
  COPYING README.md RELEASE_NOTES doc/*.pdf doc/TODO.txt \
  $PKG/usr/doc/$PRGNAM-$VERSION
cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cat $CWD/doinst.sh > $PKG/install/doinst.sh

cd $PKG
/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

enine · 04-28-2021, 07:26 PM

Are you running 14.2 or -current?
Have you checked to make sure you have all the prerequisites from the readme in 2021-10?
* [Qt (5.4 ->)](https://qt.io/)
* [QScintilla2 (2.9 ->)](https://riverbankcomputing.com/software/qscintilla/)
* [CGAL (4.9 ->)](https://www.cgal.org/)
* [GMP (5.x)](https://gmplib.org/)
* [MPFR (3.x)](https://www.mpfr.org/)
* [cmake (2.8 ->, required by CGAL and the test framework)](https://cmake.org/)
* [boost (1.55 ->)](https://www.boost.org/)
* [OpenCSG (1.3.2 ->)](http://www.opencsg.org/)
* [GLEW (1.5.4 ->)](http://glew.sourceforge.net/)
* [Eigen (3.x)](https://eigen.tuxfamily.org/)
* [glib2 (2.x)](https://developer.gnome.org/glib/)
* [fontconfig (2.10 -> )](https://fontconfig.org/)
* [freetype2 (2.4 -> )](https://freetype.org/)
* [harfbuzz (0.9.19 -> )](https://www.freedesktop.org/wiki/Software/HarfBuzz/)
* [libzip (0.10.1 -> )](https://libzip.org/)
* [Bison (2.4 -> )](https://www.gnu.org/software/bison/)
* [Flex (2.5.35 -> )](http://flex.sourceforge.net/)
* [pkg-config (0.26 -> )](https://www.freedesktop.org/wiki/Software/pkg-config/)
* [double-conversion (2.0.1 -> )](https://github.com/google/double-conversion/)

my 14.2 system doesn't have double-conversion for example so that must be a requirement of the newer version of OpenScad as I have the 2015 version installed

adcdam · 04-28-2021, 07:30 PM

im running current and i already installed double-conversion. All my packages are higher version than that list.
could be the problem that is building with qmake but qmake is set to qt4 instead of qt5?

qmake --version
QMake version 2.01a
Using Qt version 4.8.7 in /usr/lib64/qt/lib

i deleted qt 4.8.7 and now it say
qmake --version
QMake version 3.1
Using Qt version 5.15.2 in /usr/lib64

but when compiling i got this
./openscad.SlackBuild: line 72: qmake: command not found

edit: i was able to compile it
but i had to change a few things for example i had to set the full path of qmake
#!/bin/sh

Code:

# Slackware build script for OpenSCAD

# Copyright 2013 David Spencer, Baildon, West Yorkshire, U.K.
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

PRGNAM=openscad
VERSION=${VERSION:-2021.01}
BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}

if [ -z "$ARCH" ]; then
  case "$( uname -m )" in
    i?86) ARCH=i486 ;;
    arm*) ARCH=arm ;;
       *) ARCH=$( uname -m ) ;;
  esac
fi

CWD=$(pwd)
TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "i686" ]; then
  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -fPIC"
  LIBDIRSUFFIX="64"
else
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
fi

set -e

rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf $PRGNAM-$VERSION
tar xvf $CWD/$PRGNAM-$VERSION.src.tar.gz
cd $PRGNAM-$VERSION
chown -R root:root .
find -L . \
 \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
 -exec chmod 755 {} \; -o \
 \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
 -exec chmod 644 {} \;

/usr/lib64/qt5/bin/qmake -recursive openscad.pro \
  PREFIX=/usr \
  QMAKE_CFLAGS="$SLKCFLAGS" \
  QMAKE_CXXFLAGS="$SLKCFLAGS"
make -j12
make install INSTALL_ROOT=$PKG
#sed -i 's/bool convex = ps->convexValue();/bool convex = (bool) ps->convexValue();/g' src/CSGTermEvaluator.cc
#sed -i '50a#include <stack>' src/parser.y


find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

#mv $PKG/usr/share/man $PKG/usr/man
#find $PKG/usr/man -type f -exec gzip -9 {} \;
#for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done

#mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
#cp -a \
#  COPYING README.md RELEASE_NOTES doc/*.pdf doc/TODO.txt \
#  $PKG/usr/doc/$PRGNAM-$VERSION
#cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cat $CWD/doinst.sh > $PKG/install/doinst.sh

cd $PKG
/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

enine · 04-29-2021, 10:29 AM

You beat me to it, once you said -current I was going to point you to https://github.com/Ponce/slackbuilds...phics/openscad

Is 2021 version a lot different from the old 2015? I've using openscad and slic3r for 3d printing

adcdam · 04-29-2021, 06:47 PM

Thanks enine!!! i got the package working with the changes i did to the slackbuild yesterday, a pity i didnt see that earlier,
anyway qmake-qt5 good to know i dont have to use the full path.