LinuxQuestions.org - opescad fail to compile [solved]

- Slackware (https://www.linuxquestions.org/questions/slackware-14/)

- - opescad fail to compile [solved] (https://www.linuxquestions.org/questions/slackware-14/opescad-fail-to-compile-%5Bsolved%5D-4175694430/)

opescad fail to compile [solved]

i edited the very very old slackbuild from 2015
I Downloaded the 2021.01 sources
but it fail to compile it say

|
make: *** [Makefile:3049: objects/src/scadapi.o] Error 1

anyone can check why it fail?

Code:

#!/bin/sh



# Slackware build script for OpenSCAD



# Copyright 2013 David Spencer, Baildon, West Yorkshire, U.K.

# All rights reserved.

#

# Redistribution and use of this script, with or without modification, is

# permitted provided that the following conditions are met:

#

# 1. Redistributions of this script must retain the above copyright

#    notice, this list of conditions and the following disclaimer.

#

#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED

#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO

#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.



PRGNAM=openscad

VERSION=${VERSION:-2021.01}

BUILD=${BUILD:-1}

TAG=${TAG:-_SBo}



if [ -z "$ARCH" ]; then

  case "$( uname -m )" in

    i?86) ARCH=i486 ;;

    arm*) ARCH=arm ;;

      *) ARCH=$( uname -m ) ;;

  esac

fi



CWD=$(pwd)

TMP=${TMP:-/tmp/SBo}

PKG=$TMP/package-$PRGNAM

OUTPUT=${OUTPUT:-/tmp}



if [ "$ARCH" = "i486" ]; then

  SLKCFLAGS="-O2 -march=i486 -mtune=i686"

  LIBDIRSUFFIX=""

elif [ "$ARCH" = "i686" ]; then

  SLKCFLAGS="-O2 -march=i686 -mtune=i686"

  LIBDIRSUFFIX=""

elif [ "$ARCH" = "x86_64" ]; then

  SLKCFLAGS="-O2 -fPIC"

  LIBDIRSUFFIX="64"

else

  SLKCFLAGS="-O2"

  LIBDIRSUFFIX=""

fi



set -e



rm -rf $PKG

mkdir -p $TMP $PKG $OUTPUT

cd $TMP

rm -rf $PRGNAM-$VERSION

tar xvf $CWD/$PRGNAM-$VERSION.src.tar.gz

cd $PRGNAM-$VERSION

chown -R root:root .

find -L . \

 \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \

 -exec chmod 755 {} \; -o \

 \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \

 -exec chmod 644 {} \;



qmake -recursive openscad.pro \

  PREFIX=/usr \

  QMAKE_CFLAGS="$SLKCFLAGS" \

  QMAKE_CXXFLAGS="$SLKCFLAGS"

make -j12

make install INSTALL_ROOT=$PKG

sed -i 's/bool convex = ps->convexValue();/bool convex = (bool) ps->convexValue();/g' src/CSGTermEvaluator.cc

sed -i '50a#include <stack>' src/parser.y





find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \

  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true



mv $PKG/usr/share/man $PKG/usr/man

find $PKG/usr/man -type f -exec gzip -9 {} \;

for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done



mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION

cp -a \

  COPYING README.md RELEASE_NOTES doc/*.pdf doc/TODO.txt \

  $PKG/usr/doc/$PRGNAM-$VERSION

cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild



mkdir -p $PKG/install

cat $CWD/slack-desc > $PKG/install/slack-desc

cat $CWD/doinst.sh > $PKG/install/doinst.sh



cd $PKG

/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

Are you running 14.2 or -current?
Have you checked to make sure you have all the prerequisites from the readme in 2021-10?
* [Qt (5.4 ->)](https://qt.io/)
* [QScintilla2 (2.9 ->)](https://riverbankcomputing.com/software/qscintilla/)
* [CGAL (4.9 ->)](https://www.cgal.org/)
* [GMP (5.x)](https://gmplib.org/)
* [MPFR (3.x)](https://www.mpfr.org/)
* [cmake (2.8 ->, required by CGAL and the test framework)](https://cmake.org/)
* [boost (1.55 ->)](https://www.boost.org/)
* [OpenCSG (1.3.2 ->)](http://www.opencsg.org/)
* [GLEW (1.5.4 ->)](http://glew.sourceforge.net/)
* [Eigen (3.x)](https://eigen.tuxfamily.org/)
* [glib2 (2.x)](https://developer.gnome.org/glib/)
* [fontconfig (2.10 -> )](https://fontconfig.org/)
* [freetype2 (2.4 -> )](https://freetype.org/)
* [harfbuzz (0.9.19 -> )](https://www.freedesktop.org/wiki/Software/HarfBuzz/)
* [libzip (0.10.1 -> )](https://libzip.org/)
* [Bison (2.4 -> )](https://www.gnu.org/software/bison/)
* [Flex (2.5.35 -> )](http://flex.sourceforge.net/)
* [pkg-config (0.26 -> )](https://www.freedesktop.org/wiki/Software/pkg-config/)
* [double-conversion (2.0.1 -> )](https://github.com/google/double-conversion/)

my 14.2 system doesn't have double-conversion for example so that must be a requirement of the newer version of OpenScad as I have the 2015 version installed

im running current and i already installed double-conversion. All my packages are higher version than that list.
could be the problem that is building with qmake but qmake is set to qt4 instead of qt5?

qmake --version
QMake version 2.01a
Using Qt version 4.8.7 in /usr/lib64/qt/lib

i deleted qt 4.8.7 and now it say
qmake --version
QMake version 3.1
Using Qt version 5.15.2 in /usr/lib64

but when compiling i got this
./openscad.SlackBuild: line 72: qmake: command not found

edit: i was able to compile it
but i had to change a few things for example i had to set the full path of qmake
#!/bin/sh

Code:

# Slackware build script for OpenSCAD



# Copyright 2013 David Spencer, Baildon, West Yorkshire, U.K.

# All rights reserved.

#

# Redistribution and use of this script, with or without modification, is

# permitted provided that the following conditions are met:

#

# 1. Redistributions of this script must retain the above copyright

#    notice, this list of conditions and the following disclaimer.

#

#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED

#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO

#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.



PRGNAM=openscad

VERSION=${VERSION:-2021.01}

BUILD=${BUILD:-1}

TAG=${TAG:-_SBo}



if [ -z "$ARCH" ]; then

  case "$( uname -m )" in

    i?86) ARCH=i486 ;;

    arm*) ARCH=arm ;;

      *) ARCH=$( uname -m ) ;;

  esac

fi



CWD=$(pwd)

TMP=${TMP:-/tmp/SBo}

PKG=$TMP/package-$PRGNAM

OUTPUT=${OUTPUT:-/tmp}



if [ "$ARCH" = "i486" ]; then

  SLKCFLAGS="-O2 -march=i486 -mtune=i686"

  LIBDIRSUFFIX=""

elif [ "$ARCH" = "i686" ]; then

  SLKCFLAGS="-O2 -march=i686 -mtune=i686"

  LIBDIRSUFFIX=""

elif [ "$ARCH" = "x86_64" ]; then

  SLKCFLAGS="-O2 -fPIC"

  LIBDIRSUFFIX="64"

else

  SLKCFLAGS="-O2"

  LIBDIRSUFFIX=""

fi



set -e



rm -rf $PKG

mkdir -p $TMP $PKG $OUTPUT

cd $TMP

rm -rf $PRGNAM-$VERSION

tar xvf $CWD/$PRGNAM-$VERSION.src.tar.gz

cd $PRGNAM-$VERSION

chown -R root:root .

find -L . \

 \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \

 -exec chmod 755 {} \; -o \

 \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \

 -exec chmod 644 {} \;



/usr/lib64/qt5/bin/qmake -recursive openscad.pro \

  PREFIX=/usr \

  QMAKE_CFLAGS="$SLKCFLAGS" \

  QMAKE_CXXFLAGS="$SLKCFLAGS"

make -j12

make install INSTALL_ROOT=$PKG

#sed -i 's/bool convex = ps->convexValue();/bool convex = (bool) ps->convexValue();/g' src/CSGTermEvaluator.cc

#sed -i '50a#include <stack>' src/parser.y





find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \

  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true



#mv $PKG/usr/share/man $PKG/usr/man

#find $PKG/usr/man -type f -exec gzip -9 {} \;

#for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done



#mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION

#cp -a \

#  COPYING README.md RELEASE_NOTES doc/*.pdf doc/TODO.txt \

#  $PKG/usr/doc/$PRGNAM-$VERSION

#cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild



mkdir -p $PKG/install

cat $CWD/slack-desc > $PKG/install/slack-desc

cat $CWD/doinst.sh > $PKG/install/doinst.sh



cd $PKG

/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

You beat me to it, once you said -current I was going to point you to https://github.com/Ponce/slackbuilds...phics/openscad

Is 2021 version a lot different from the old 2015? I've using openscad and slic3r for 3d printing

Thanks enine!!! i got the package working with the changes i did to the slackbuild yesterday, a pity i didnt see that earlier,
anyway qmake-qt5 good to know i dont have to use the full path.