I tried adding virtualhost to httpd2.conf file and edited the ScriptAlias, but it not executing the php scripts.
what should i change here in order to execute php scripts.
This is my httpd2.conf file for mandrake 10.0
====================================================
### Main Configuration Section
### You really shouldn't change these settings unless you're a guru
###
ServerRoot /etc/httpd/2.0
#ServerName localhost
#LockFile /etc/httpd/httpd.lock
PidFile /var/run/httpd.pid
ErrorLog logs/error_log
LogLevel warn
DocumentRoot /var/www/html
### Dynamic Shared Object (DSO) Support
###
### You should always leave those three, as they are needed for
### normal use.
### mod_access (Order, Allow, etc..)
### mod_log_config (Transferlog, etc..)
### mod_mime (AddType, etc...)
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
##LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
##LoadModule charset_lite_module modules/mod_charset_lite.so
##LoadModule case_filter_module modules/mod_case_filter.so
##LoadModule case_filter_in_module modules/mod_case_filter_in.so
##LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
##LoadModule mime_magic_module modules/mod_mime_magic.so
##LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
##LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgi_module modules/mod_cgi.so
##LoadModule cgid_module modules/mod_cgid.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
##LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
###
### Global Configuration
###
# We now support multiple apache configurations on the same server. In
# common.conf, we put all directives that are common to all implementations
# (httpd, httpd-perl, etc.)
# For Apache2 we load all conf files in conf.d
Include /etc/httpd/conf.d/*.conf
Include conf/commonhttpd.conf
###
### IP Address/Port and Proxied configuration section
###
# The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you
# are using a proxy or accelerator, like the Apache-SGI or khttpd, so that
# the fast web server serves static content while Apache handles the
# cgi or php files
#BindAddress *
<IfDefine APACHEPROXIED>
Listen 8080
</IfDefine>
<IfDefine !APACHEPROXIED>
Listen 80
</IfDefine>
# Likewise, we can set apache as the server by default and send perl
# requests via ProxyPass to apache-mod_perl. It increases performance
# since the perl interpreter is only used for perl and the standard apache
# does all the html and image files, with a smaller footprint.
#
# If you install apache and apache-mod_perl, this is the default config.
# If you don't want two web servers to use perl, uninstall apache, and
# apache-mod_perl will not be proxied.
<IfDefine PERLPROXIED>
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteRule ^proxy:.* - [F]
RewriteRule ^(.*\/perl\/.*)$
http://%{HTTP_HOST}:8200$1 [P]
RewriteRule ^(.*\/cgi-perl\/.*)$
http://%{HTTP_HOST}:8200$1 [P]
</IfModule>
</IfDefine>
###
### Log configuration Section
###
<IfModule mod_log_config.c>
#Single logfile with access, agent and referer information
#This is the default, if vlogs are not defined for the main server
CustomLog logs/access_log combined env=!VLOG
#If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG
</IfModule>
###
### Virtual Hosts
###
# We include different templates for Virtual Hosting. Have a look in the
# vhosts directory and modify to suit your needs.
Include conf/vhosts/Vhosts.conf
#Include conf/vhosts/DynamicVhosts.conf
#Include conf/vhosts/VirtualHomePages.conf
###
### Performance settings Section
###
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
# prefork MPM [THIS IS THE DEFAULT]
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
NumServers 5
StartThreads 5
MinSpareThreads 5
MaxSpareThreads 10
MaxThreadsPerChild 20
MaxRequestsPerChild 0
</IfModule>
NameVirtualHost apt:7070
<VirtualHost apt:7070>
ServerName apt:7070
DocumentRoot /home/apt/Working/PHPSource
DirectoryIndex index.html
#ScriptAlias /php/ "/usr/bin/"
#AddType application/x-httpd-php .php
<Directory "/home/apt/Working/PHPSource">
Options FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
Satisfy any
</Directory>
</VirtualHost>
======================================================
