Hi all,
I am unable to properly configure ACPI on my Umax 575T notebook (sold in US as Clevo 27D, I think). I am using Mandrake 10.0 with 2.6.3 kernel. Dmsg shows that several ACPI features are supported but I am only able to see CPU temp and batery monitor and I can't get suspend-to disk, suspend-to-RAM and CPU throtling working. Problem is somewhere in acpid configuration (at least I suspect it
) but i can't figure out how to configure it.
Any help would be really appretiated, I'm still newbie
here's my dmesg info about ACPI:
Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004
ACPI: RSDP (v000 PTLTD ) @ 0x000f6ef0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x2bdf7883
ACPI: FADT (v001 SiS M650 0x06040000 PTL 0x000f4240) @ 0x2bdfaf8c
ACPI: DSDT (v001 Clevo 650M 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Subsystem revision 20040211
Looking for DSDT in initrd ... not found!
ACPI: IRQ11 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS962 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10)
ACPI: Embedded Controller [EC] (gpe 23)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
apm: overridden by ACPI.
ACPI: (supports S0 S3 S4 S5)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Thermal Zone [THM0] (61 C)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]