pcmcia not activating DWL-G650
Hi,
I have an Inspiron 2500 running RH 9.0 kernel 2.4.20-8 and
D-Link DWL-G650 (H/W Ver: B3 F/W Ver: 2.36)
I bought a DLINK DWL-G650 that works fine on windows. I'm trying to get it to work on Linux but,
the PCMCIA bus won't even activate it. No lights. Other cards are instantly recongized.
Here's lspci
-------------------
VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 11)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 03)
00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 03)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 03)
01:03.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
01:03.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
01:0b.0 PCI bridge: Actiontec Electronics Inc: Unknown device 0100 (rev 11)
02:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
02:08.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01)
07:00.0 Ethernet controller: Unknown device 168c:0013 (rev 01)
---------------------
** OK I recently just plugged in the card into the pcmcia slot and the link light came on and the final line of lspci showed up above.
This is the ouput of cardctrl ident
-------------------
Socket 0:
no product info available
Socket 1:
product info: "Atheros Communications, Inc.", "AR5001-0000-0000", "Wireless LAN Reference Card", "00"
manfid: 0x0271, 0x0012
function: 6 (network)
-------------------
At least now I have some lights. I'll try loading some drivers.
|