LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
Reload this Page Conexant cx24120/cx24118 dvbs
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
Page 2 of 2 1 2
  Search this Thread
Old 01-11-2018, 06:31 PM   #16
Whynot
Member
 
Registered: Jan 2005
Posts: 110

Original Poster
Rep: Reputation: 18

Hi again,
I solved the nvidia problem. I had to remove all nvidia drives and then install all of them gain.
Now I need to fix dvbs card.
Code:
$ dmesg | grep 'dvb\|DVB\|B2C2\|b2c2\|24120\|cx\|CX\|6421\|nxt'[   25.340313] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[   26.892300] dvbdev: DVB: registering new adapter (FlexCop Digital TV device)
[   26.893892] b2c2-flexcop: MAC address = 00:08:f9:e1:ac:0f
[   26.894170] CX24123: wrong demod revision: e9
[   28.515771] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
[   28.515772] nxt200x: Unknown/Unsupported NXT chip: 00 00 00 00 00
[   29.852472] cx24120: Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[   29.852596] cx24120: Demod cx24120 rev. 0x07 detected.
[   29.852597] cx24120: Conexant cx24120/cx24118 attached.
[   30.240394] b2c2-flexcop: ISL6421 successfully attached.
[   30.240395] b2c2-flexcop: found 'Conexant CX24120/CX24118' .
[   30.240398] b2c2_flexcop_pci 0000:07:01.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[   30.240443] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
 
Old 01-11-2018, 06:36 PM   #17
Whynot
Member
 
Registered: Jan 2005
Posts: 110

Original Poster
Rep: Reputation: 18
Code:
$ dmesg | grep -i dvb
[   26.892300] dvbdev: DVB: registering new adapter (FlexCop Digital TV device)
[   29.852472] cx24120: Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[   30.240398] b2c2_flexcop_pci 0000:07:01.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[   30.240443] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[  800.341426] b2c2_flexcop_pci 0000:07:01.0: Direct firmware load for dvb-fe-cx24120-1.20.58.2.fw failed with error -2
[  800.341430] cx24120: ### ERROR: Could not load firmware (dvb-fe-cx24120-1.20.58.2.fw): -2
[  813.529566] b2c2_flexcop_pci 0000:07:01.0: Direct firmware load for dvb-fe-cx24120-1.20.58.2.fw failed with error -2
[  813.529570] cx24120: ### ERROR: Could not load firmware (dvb-fe-cx24120-1.20.58.2.fw): -2
[  868.161333] b2c2_flexcop_pci 0000:07:01.0: Direct firmware load for dvb-fe-cx24120-1.20.58.2.fw failed with error -2
[  868.161337] cx24120: ### ERROR: Could not load firmware (dvb-fe-cx24120-1.20.58.2.fw): -2
[  868.165196] b2c2_flexcop_pci 0000:07:01.0: Direct firmware load for dvb-fe-cx24120-1.20.58.2.fw failed with error -2
[  868.165199] cx24120: ### ERROR: Could not load firmware (dvb-fe-cx24120-1.20.58.2.fw): -2
 
Old 01-11-2018, 06:55 PM   #18
Emerson
LQ Sage
 
Registered: Nov 2004
Location: Saint Amant, Acadiana
Distribution: Gentoo ~amd64
Posts: 7,661

Rep: Reputation: Disabled
You need to fix errors as they appear, the first one first. So, the error -2 means it is not found. It is up to you to provide it and put it in /lib/firmware. After the firmware gets loaded we will look if there are any other errors.
 
Old 01-11-2018, 07:45 PM   #19
Whynot
Member
 
Registered: Jan 2005
Posts: 110

Original Poster
Rep: Reputation: 18
Like this
Code:
$ dmesg | grep 'dvb\|DVB\|B2C2\|b2c2\|24120\|cx\|CX\|6421\|nxt'
[    0.964217] mousedev: PS/2 mouse device common for all mice
[   24.015407] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[   24.144186] dvbdev: DVB: registering new adapter (FlexCop Digital TV device)
[   24.145821] b2c2-flexcop: MAC address = 00:08:f9:e1:ac:0f
[   24.146093] CX24123: wrong demod revision: 1a
[   25.915639] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
[   25.915641] nxt200x: Unknown/Unsupported NXT chip: 00 00 00 00 00
[   27.583476] cx24120: Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[   27.583601] cx24120: Demod cx24120 rev. 0x07 detected.
[   27.583601] cx24120: Conexant cx24120/cx24118 attached.
[   27.671452] b2c2-flexcop: ISL6421 successfully attached.
[   27.671453] b2c2-flexcop: found 'Conexant CX24120/CX24118' .
[   27.671456] b2c2_flexcop_pci 0000:07:01.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[   27.671503] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[  227.583324] cx24120: FW version 1.20.58.2
[  408.909830] cx24120: ### ERROR: Too long waiting for diseqc.
[  692.883116] cx24120: ### ERROR: Too long waiting for diseqc.
[  744.233811] cx24120: ### ERROR: Too long waiting for diseqc.
Code:
$ dmesg | grep -i dvb
[   24.144186] dvbdev: DVB: registering new adapter (FlexCop Digital TV device)
[   27.583476] cx24120: Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[   27.671456] b2c2_flexcop_pci 0000:07:01.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[   27.671503] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
I think I know why the hell of my dvbs card not working.Because of I use four different Satellites.

Code:
$ w_scan -fs -s S19E2 -D1c >> channels.conf
w_scan -fs -s S19E2 -D1c 
w_scan version 20141122 (compiled for DVB API 5.10)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
scan type SATELLITE, channellist 67
output format vdr-2.0
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
	/dev/dvb/adapter0/frontend0 -> SATELLITE "Conexant CX24120/CX24118": very good :-))

Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_ 
Using DVB API 5.10
frontend 'Conexant CX24120/CX24118' supports
INVERSION_AUTO
DVB-S
DVB-S2
FREQ (0.95GHz ... 2.15GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
using DiSEqC committed switch 1
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 
trying 'S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK  (0:0:0)'
(time: 00:00.000)         signal ok:	S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK  (0:0:0)
WARNING: start_filter: could not open demux.
Last edited by Whynot; 01-11-2018 at 07:53 PM.
 
Old 01-11-2018, 08:50 PM   #20
Emerson
LQ Sage
 
Registered: Nov 2004
Location: Saint Amant, Acadiana
Distribution: Gentoo ~amd64
Posts: 7,661

Rep: Reputation: Disabled
It has been long time since I last used DiSEqC, don't even remember how it works. All I remember is I had it working in Linux.
 
Old 01-13-2018, 04:22 PM   #21
Whynot
Member
 
Registered: Jan 2005
Posts: 110

Original Poster
Rep: Reputation: 18
Hi again

Its very strange I have another old Ubuntu computer with 17.10 version.I use the same DVBS card and Its working now with this code.

Code:
sudo wget https://github.com/OpenELEC/dvb-firmware/blob/master/firmware/dvb-fe-cx24120-1.20.58.2.fw?raw=true -O /lib/firmware/dvb-fe-cx24120-1.20.58.2.fw

Code:
$ uname -a
Linux whynot-Bus 4.13.0-21-generic #24-Ubuntu SMP Mon Dec 18 17:29:35 UTC 2017 i686 i686 i686 GNU/Linux
Code:
$ sudo ls /dev/dvb/adapter0/
demux0     dvr0       frontend0  net0
Code:
$ dmesg | grep 'dvb\|DVB\|B2C2\|b2c2\|24120\|cx\|CX\|6421\|nxt'
[    1.821288] EAX: 00000041 EBX: f180bf44 ECX: 0000028c EDX: 00000000
[   14.812441] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[   14.856211] dvbdev: DVB: registering new adapter (FlexCop Digital TV device)
[   14.858079] b2c2-flexcop: MAC address = 00:08:f9:e1:ac:0f
[   14.858358] CX24123: wrong demod revision: 11
[   15.687923] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
[   15.687926] nxt200x: Unknown/Unsupported NXT chip: 00 00 00 00 00
[   16.123553] cx24120: Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[   16.123680] cx24120: Demod cx24120 rev. 0x07 detected.
[   16.123681] cx24120: Conexant cx24120/cx24118 attached.
[   16.374134] b2c2-flexcop: ISL6421 successfully attached.
[   16.374136] b2c2-flexcop: found 'Conexant CX24120/CX24118' .
[   16.374142] b2c2_flexcop_pci 0000:05:01.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[   16.374224] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[  518.159017] cx24120: FW version 1.20.58.2
Code:
$ lspci -vvv | grep -i "SkyStar"
05:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
	Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card
 
Old 01-13-2018, 04:23 PM   #22
Whynot
Member
 
Registered: Jan 2005
Posts: 110

Original Poster
Rep: Reputation: 18
Code:
$ w_scan -fs -cDE -sS19E2 -D1c -X > channels.conf 
w_scan -fs -cDE -sS19E2 -D1c -X 
w_scan version 20170107 (compiled for DVB API 5.10)
using settings for 19.2 east Astra 1KR/1L/1N/1M
scan type SATELLITE, channellist 68
output format czap/tzap/szap/xine
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
	/dev/dvb/adapter0/frontend0 -> SATELLITE "Conexant CX24120/CX24118": very good :-))

Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_ 
Using DVB API 5.10
frontend 'Conexant CX24120/CX24118' supports
INVERSION_AUTO
DVB-S
DVB-S2
FREQ (0.95GHz ... 2.15GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
using DiSEqC committed switch 1
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 
trying 'S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK  (0:0:0)'
(time: 00:00.000)         signal ok:	S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK  (0:0:0)
        S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK  (0:0:0) : updating network_id -> (0:1:0)
        new transponder: (S2 f = 10936 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1064)) 0x4043
        new transponder: (S  f = 11739 kHz V SR = 27500  3/4 0,35  QPSK  (1:1:1066)) 0x4043
        new transponder: (S2 f = 11817 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1070)) 0x4043
        new transponder: (S2 f = 11856 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1072)) 0x4043
        new transponder: (S  f = 12110 kHz H SR = 27500  3/4 0,35  QPSK  (1:1:1073)) 0x4043
        new transponder: (S2 f = 11895 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1074)) 0x4043
        new transponder: (S2 f = 11934 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1076)) 0x4043
        new transponder: (S  f = 11973 kHz V SR = 27500  3/4 0,35  QPSK  (1:1:1078)) 0x4043
        new transponder: (S  f = 11954 kHz H SR = 27500  3/4 0,35  QPSK  (1:1:1079)) 0x4043
        new transponder: (S2 f = 12012 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1080)) 0x4043
        new transponder: (S  f = 12051 kHz V SR = 27500  3/4 0,35  QPSK  (1:1:1082)) 0x4043
        new transponder: (S2 f = 12090 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1084)) 0x4043
        new transponder: (S2 f = 12129 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1086)) 0x4043
        new transponder: (S2 f = 12168 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1088)) 0x4043
        new transponder: (S  f = 12188 kHz H SR = 27500  3/4 0,35  QPSK  (1:1:1089)) 0x4043
        new transponder: (S2 f = 12207 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1090)) 0x4043
        new transponder: (S  f = 12227 kHz H SR = 27500  3/4 0,35  QPSK  (1:1:1091)) 0x4043
        new transponder: (S2 f = 12246 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1092)) 0x4043
        new transponder: (S  f = 12266 kHz H SR = 27500  3/4 0,35  QPSK  (1:1:1093)) 0x4043
        new transponder: (S2 f = 12285 kHz V SR = 29700  2/3 0,25  8PSK  (1:1:1094)) 0x4043
        new transponder: (S2 f = 12324 kHz V SR = 29700  2/3 0,25  8PSK  (1:1:1096)) 0x4043
        new transponder: (S  f = 12363 kHz V SR = 27500  3/4 0,35  QPSK  (1:1:1098)) 0x4043
        new transponder: (S2 f = 12383 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:11)) 0x4043
        new transponder: (S2 f = 12402 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1100)) 0x4043
        new transponder: (S  f = 11837 kHz H SR = 27500  3/4 0,35  QPSK  (1:1:1101)) 0x4043
        new transponder: (S2 f = 12441 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1102)) 0x4043
        new transponder: (S  f = 12515 kHz H SR = 22000  5/6 0,35  QPSK  (53:1:1105)) 0x4043
        new transponder: (S  f = 12545 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1107)) 0x4043
        new transponder: (S  f = 12552 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1108)) 0x4043
        new transponder: (S2 f = 12574 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1109)) 0x4043
        new transponder: (S2 f = 12581 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1110)) 0x4043
        new transponder: (S  f = 12604 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1111)) 0x4043
        new transponder: (S  f = 12633 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1113)) 0x4043
        new transponder: (S  f = 12663 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1115)) 0x4043
        new transponder: (S  f = 12692 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1117)) 0x4043
        new transponder: (S2 f = 12699 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1118)) 0x4043
        new transponder: (S2 f = 12729 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1120)) 0x4043
        new transponder: (S2 f = 12305 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:12)) 0x4043
        new transponder: (S  f = 12422 kHz H SR = 27500  3/4 0,35  QPSK  (1:1:1201)) 0x4043
        new transponder: (S2 f = 11993 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:13)) 0x4043
        new transponder: (S2 f = 11876 kHz H SR = 27500  3/4 0,35  8PSK  (133:1:14)) 0x4043
        new transponder: (S  f = 10921 kHz H SR = 22000  7/8 0,35  QPSK  (133:1:15)) 0x4043
        new transponder: (S2 f = 11720 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:3)) 0x4043
        new transponder: (S  f = 12480 kHz V SR = 27500  3/4 0,35  QPSK  (133:1:33)) 0x4043
        new transponder: (S2 f = 12032 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:4)) 0x4043
        new transponder: (S  f = 12461 kHz H SR = 27500  3/4 0,35  QPSK  (133:1:5)) 0x4043
        new transponder: (S2 f = 11915 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:6)) 0x4043
        new transponder: (S  f = 12149 kHz H SR = 27500  3/4 0,35  QPSK  (133:1:7)) 0x4043
        new transponder: (S2 f = 11171 kHz H SR = 22000  3/4 0,35  8PSK  (133:1:9)) 0x4043
        new transponder: (S2 f = 11112 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1043)) 0x4043
        new transponder: (S2 f = 11229 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1002)) 0x4043
        new transponder: (S2 f = 10906 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1062)) 0x4043
        new transponder: (S2 f = 10994 kHz H SR = 22000  5/6 0,35  8PSK  (1:1:1035)) 0x4043
        new transponder: (S2 f = 12344 kHz H SR = 30000  2/3 0,20  8PSK  (1:1:1097)) 0x4043
        new transponder: (S2 f = 11759 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:2)) 0x4043
        new transponder: (S2 f = 11798 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:16)) 0x4043
        new transponder: (S2 f = 12071 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:8)) 0x4043
        new transponder: (S2 f = 11656 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1030)) 0x4043
        new transponder: (S2 f = 11332 kHz H SR = 22000  3/4 0,35  8PSK  (133:1:10)) 0x4043
        new transponder: (S  f = 11244 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1003)) 0x4043
        new transponder: (S2 f = 11259 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1004)) 0x4043
        new transponder: (S2 f = 11273 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1005)) 0x4043
        new transponder: (S2 f = 11288 kHz V SR = 22000  2/3 0,20  8PSK  (1:1:1006)) 0x4043
        new transponder: (S2 f = 11303 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1007)) 0x4043
        new transponder: (S  f = 11318 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1008)) 0x4043
        new transponder: (S2 f = 11347 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1010)) 0x4043
        new transponder: (S2 f = 11362 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1011)) 0x4043
        new transponder: (S2 f = 11377 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1012)) 0x4043
        new transponder: (S  f = 11391 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1013)) 0x4043
        new transponder: (S  f = 11421 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1015)) 0x4043
        new transponder: (S2 f = 11436 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1016)) 0x4043
        new transponder: (S2 f = 11464 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1017)) 0x4043
        new transponder: (S2 f = 11494 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1019)) 0x4043
        new transponder: (S  f = 11509 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1020)) 0x4043
        new transponder: (S  f = 11523 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1021)) 0x4043
        new transponder: (S  f = 11538 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1022)) 0x4043
        new transponder: (S2 f = 11582 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1025)) 0x4043
        new transponder: (S  f = 11597 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1026)) 0x4043
        new transponder: (S  f = 11612 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1027)) 0x4043
        new transponder: (S  f = 11627 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1028)) 0x4043
        new transponder: (S2 f = 11671 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1031)) 0x4043
        new transponder: (S  f = 11686 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1032)) 0x4043
        new transponder: (S2 f = 10964 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1033)) 0x4043
        new transponder: (S  f = 10979 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1034)) 0x4043
        new transponder: (S  f = 11038 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1038)) 0x4043
        new transponder: (S2 f = 11053 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1039)) 0x4043
        new transponder: (S  f = 11068 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1040)) 0x4043
        new transponder: (S2 f = 11082 kHz H SR = 22000  3/4 0,20  8PSK  (1:1:1041)) 0x4043
        new transponder: (S  f = 11097 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1042)) 0x4043
        new transponder: (S2 f = 11127 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1044)) 0x4043
        new transponder: (S  f = 11156 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1046)) 0x4043
        new transponder: (S  f = 11186 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1048)) 0x4043
        already known: (S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK  (0:1:0)), but not found by pids
        S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK  (0:1:0) : updating tp ids -> (1:1:1050)
        new transponder: (S  f = 10744 kHz H SR = 22000  5/6 0,35  QPSK  (1:1:1051)) 0x4043
        new transponder: (S  f = 10759 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1052)) 0x4043
        new transponder: (S2 f = 10773 kHz H SR = 22000  3/4 0,20  8PSK  (1:1:1053)) 0x4043
        new transponder: (S  f = 10788 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1054)) 0x4043
        new transponder: (S2 f = 10803 kHz H SR = 22000  3/4 0,35  8PSK  (1:1:1055)) 0x4043
        new transponder: (S2 f = 10818 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1056)) 0x4043
        new transponder: (S2 f = 10832 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1057)) 0x4043
        new transponder: (S  f = 10847 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1058)) 0x4043
        new transponder: (S  f = 10877 kHz V SR = 22000  5/6 0,35  QPSK  (1:1:1060)) 0x4043
        new transponder: (S2 f = 10891 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1061)) 0x4043
10744: skipped (already known transponder)
10759: skipped (already known transponder)
10773: skipped (already known transponder)
10788: skipped (already known transponder)
10803: skipped (already known transponder)
10818: skipped (already known transponder)
10832: skipped (already known transponder)
10847: skipped (already known transponder)
trying 'S  f = 10862 kHz H SR = 22000  7/8 0,35  QPSK  (0:0:0)'
(time: 00:02.392) diseqc_send_msg: FE_DISEQC_SEND_MASTER_CMD failed.

initial_tune:2813: Setting frontend failed S  f = 10862 kHz H SR = 22000  7/8 0,35  QPSK  (0:0:0)
10877: skipped (already known transponder)
10891: skipped (already known transponder)
10921: skipped (already known transponder)
10936: skipped (already known transponder)
10964: skipped (already known transponder)
10979: skipped (already known transponder)
trying 'S  f = 11023 kHz H SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 00:03.340) 
11038: skipped (already known transponder)
11053: skipped (already known transponder)
11068: skipped (already known transponder)
11082: skipped (already known transponder)
11097: skipped (already known transponder)
11127: skipped (already known transponder)
11156: skipped (already known transponder)
11171: skipped (already known transponder)
11186: skipped (already known transponder)
11244: skipped (already known transponder)
11259: skipped (already known transponder)
11288: skipped (already known transponder)
11303: skipped (already known transponder)
11318: skipped (already known transponder)
11332: skipped (already known transponder)
11347: skipped (already known transponder)
11362: skipped (already known transponder)
11377: skipped (already known transponder)
11391: skipped (already known transponder)
11421: skipped (already known transponder)
11436: skipped (already known transponder)
11464: skipped (already known transponder)
trying 'S  f = 11479 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 00:06.948) 
11494: skipped (already known transponder)
11509: skipped (already known transponder)
11523: skipped (already known transponder)
11538: skipped (already known transponder)
trying 'S2 f = 11553 kHz H SR = 22000  3/4 0,35  8PSK  (0:0:0)'
(time: 00:10.572) 
trying 'S  f = 11568 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 00:14.128) 
11582: skipped (already known transponder)
11597: skipped (already known transponder)
11612: skipped (already known transponder)
11627: skipped (already known transponder)
trying 'S  f = 11641 kHz H SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 00:17.688) 
trying 'S  f = 11656 kHz V SR = 22000 AUTO 0,AUTO  QPSK  (0:0:0)'
(time: 00:21.268) 
11671: skipped (already known transponder)
11686: skipped (already known transponder)
trying 'S  f = 11720 kHz H SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 00:24.896) 
11739: skipped (already known transponder)
trying 'S  f = 11759 kHz H SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 00:28.476) 
trying 'S  f = 11778 kHz V SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 00:32.064) 
trying 'S  f = 11798 kHz H SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 00:35.664) 
trying 'S2 f = 11817 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)'
(time: 00:39.336) 
11837: skipped (already known transponder)
trying 'S  f = 11856 kHz V SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 00:42.916) 
11876: skipped (already known transponder)
trying 'S  f = 11895 kHz V SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 00:46.504) 
11915: skipped (already known transponder)
trying 'S  f = 11934 kHz V SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 00:50.084) 
11954: skipped (already known transponder)
11973: skipped (already known transponder)
11993: skipped (already known transponder)
trying 'S2 f = 12012 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)'
(time: 00:53.748) 
trying 'S  f = 12032 kHz H SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 00:57.320) 
12051: skipped (already known transponder)
trying 'S  f = 12071 kHz H SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 01:00.920) 
trying 'S2 f = 12090 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)'
(time: 01:04.537) 
12110: skipped (already known transponder)
trying 'S2 f = 12129 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)'
(time: 01:08.149) 
12149: skipped (already known transponder)
trying 'S2 f = 12168 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)'
(time: 01:11.741)         signal ok:	S2 f = 12168 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)
        S2 f = 12168 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0) : updating network_id -> (0:1:0)
        updating transponder:
           (S2 f = 12168 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1088)) 0x4043
        to (S2 f = 12168 kHz V SR = 29700  2/3 0,25  8PSK  (1:1:1088)) 0x4043
        new transponder: (S2 f = 12722 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1119)) 0x4043
12188: skipped (already known transponder)
trying 'S2 f = 12207 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)'
(time: 01:16.385) 
12227: skipped (already known transponder)
trying 'S2 f = 12246 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)'
(time: 01:19.937) 
12266: skipped (already known transponder)
12285: skipped (already known transponder)
12305: skipped (already known transponder)
trying 'S  f = 12324 kHz V SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 01:23.537) 
trying 'S2 f = 12344 kHz H SR = 27500 AUTO 0,AUTO  8PSK  (0:0:0)'
(time: 01:27.121) 
12363: skipped (already known transponder)
12383: skipped (already known transponder)
trying 'S  f = 12402 kHz V SR = 27500  3/4 0,35  QPSK  (0:0:0)'
(time: 01:30.789) 
12422: skipped (already known transponder)
trying 'S2 f = 12441 kHz V SR = 29700  2/3 0,25  8PSK  (0:0:0)'
(time: 01:34.333) 
12461: skipped (already known transponder)
12480: skipped (already known transponder)
12515: skipped (already known transponder)
trying 'S  f = 12522 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 01:37.981) 
trying 'S  f = 12525 kHz V SR = 27500 AUTO 0,AUTO  QPSK  (0:0:0)'
(time: 01:41.545) 
12545: skipped (already known transponder)
12552: skipped (already known transponder)
12574: skipped (already known transponder)
trying 'S  f = 12581 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 01:45.137) 
12604: skipped (already known transponder)
trying 'S  f = 12611 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 01:48.717) 
12633: skipped (already known transponder)
trying 'S  f = 12640 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 01:52.257) 
trying 'S2 f = 12645 kHz H SR = 30000 AUTO 0,AUTO  8PSK  (0:0:0)'
(time: 01:55.877) 
12663: skipped (already known transponder)
trying 'S2 f = 12670 kHz V SR = 22000  2/3 0,35  8PSK  (0:0:0)'
(time: 01:59.489) 
trying 'S2 f = 12685 kHz H SR = 30000 AUTO 0,AUTO  8PSK  (0:0:0)'
(time: 02:03.045) 
12692: skipped (already known transponder)
trying 'S  f = 12699 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 02:06.626) 
trying 'S2 f = 12722 kHz H SR = 23500  2/3 0,20  8PSK  (0:0:0)'
(time: 02:10.210) 
trying 'S2 f = 12725 kHz H SR = 30000 AUTO 0,AUTO  8PSK  (0:0:0)'
(time: 02:13.798) 
trying 'S  f = 12729 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)'
(time: 02:17.418) diseqc_send_msg: FE_DISEQC_SEND_MASTER_CMD failed.

initial_tune:2813: Setting frontend failed S  f = 12729 kHz V SR = 22000  5/6 0,35  QPSK  (0:0:0)
tune to: S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1050) (time: 02:18.310) 
        updating transponder:
           (S2 f = 12168 kHz V SR = 29700  2/3 0,25  8PSK  (1:1:1088)) 0x4043
        to (S2 f = 12168 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1088)) 0x4043
	service = BEINLALIGA1 (Movistar+)
	service = ALQUILER HD (Movistar+)
	service = BEINLALIGA2 (Movistar+)
	service = AXN HD (DIGITAL+)
	service = M.COMEDIA HD (Movistar+)
	service = LALIGATV BAR (Movistar+)
	service = ALQUILER 2 HD (Movistar+)
	service = M.PartidazoHD (CANAL+)
	service = BEIN MAX 1 (Movistar+)
	service = LA 1 HD ((null))
	service = BEIN MAX 2 (Movistar+)
tune to: S2 f = 10936 kHz V SR = 22000  2/3 0,35  8PSK  (1:1:1064) (time: 02:30.802) 
	service = NICKELODEONHD ((null))
	service = MEZZO LIVE HD (DIGITAL+)
	service = CALLE 13 HD (DIGITAL+)
	service = EUROSPORT1HD (MOVISTAR+)
	service = M. DEP 1 HD (Movistar+)
	service = NAT GEO HD (DIGITAl+)
	service = TOROS TV HD (Movistar+)
tune to: S  f = 11739 kHz V SR = 27500  3/4 0,35  QPSK  (1:1:1066) (time: 02:42.790) 
	service = Data_System_TR_66 (MTV Networks Europe)
	service = Nickelodeon Turkey (MTV Networks Europe)
	service = MTV Hits (MTV Networks Europe)
	service = MTV Dance (MTV Networks Europe)
	service = VH1 (MTV Networks Europe)
	service = VH1 Classic (MTV Networks Europe)
	service = MTV ROCKS (MTV Networks Europe)
	service = NICKELODEON Iberia (MTV Networks Europe)
	service = Nick Jr  (MTV Networks Europe)
	service = Nick Jr. (MTV Networks Europe)
	service = Nick Jr.. (MTV Networks Europe)
	service = VH1. (MTV Networks Europe)
	service = VH1 Classic. (MTV Networks Europe)
	service = Nick_Jr. (MTV Networks Europe)
	service = Nick Junior Global (MTV Networks Europe)
        new transponder: (S2 f = 11553 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1023)) 0x4043
        new transponder: (S2 f = 10714 kHz H SR = 22000  2/3 0,35  8PSK  (1:1:1049)) 0x4043
        updating transponder:
           (S2 f = 12168 kHz V SR = 29700  5/6 0,25  QPSK  (1:1:1088)) 0x4043
        to (S2 f = 12168 kHz V SR = 29700  2/3 0,25  8PSK  (1:1:1088)) 0x4043
        already known: (S2 f = 11720 kHz H SR = 27500 9/10 0,35  QPSK  (133:1:3)), but not found by pids
 
Old 01-23-2018, 04:44 PM   #23
Whynot
Member
 
Registered: Jan 2005
Posts: 110

Original Poster
Rep: Reputation: 18
I just compiled new Kernel As described here
https://wiki.ubuntu.com/KernelTeam/GitKernelBuild
Code:
uname -a
Linux whynot-Bus 4.15.0-rc9-custom #1 SMP Tue Jan 23 13:46:29 CET 2018 x86_64 x86_64 x86_64 GNU/Linux
but I dont know how could we patch or add this latest drivers

https://github.com/pboettch/linux/tree/cx24120-v2
https://github.com/pboettch/linux/tr.../dvb-frontends

Code:
cx24117.c 	[media] cx24117: fix a buffer overflow when checking userspace params 	3 years ago
	cx24117.h 	[media] Add and use IS_REACHABLE macro 	3 years ago
	cx24120.c 	[media] cx24120: fix minor checkpatch-error 	3 years ago
	cx24120.h 	[media] cx24120: fix strict checkpatch-errors 	3 years ago
	cx24123.c 	[media] cx24123: fix kernel oops due to missing parent pointer 	3 years ago
	cx24123.h 	[media] cx24123/mb86a20s/s921: fix compiler warnings




Code:
$ kaffeine -d
23-01-18 23:03:20.209 [Debug   ] kaffeine.vlc: Using libVLC with args: --no-video-title-show
23-01-18 23:03:20.265 [Debug   ] kaffeine.mediawidget: video resized to 0.0
23-01-18 23:03:20.327 [Info    ] kaffeine.dvb: Using built-in dvb device manager
23-01-18 23:03:20.562 [Debug   ] kaffeine.dev: New device detected: /org/kde/solid/udev/sys/devices/pci0000:00/0000:00:1e.0/0000:07:01.0/dvb/dvb0.demux0
23-01-18 23:03:20.562 [Debug   ] kaffeine.dev: New device detected: /org/kde/solid/udev/sys/devices/pci0000:00/0000:00:1e.0/0000:07:01.0/dvb/dvb0.dvr0
23-01-18 23:03:20.562 [Debug   ] kaffeine.dev: New device detected: /org/kde/solid/udev/sys/devices/pci0000:00/0000:00:1e.0/0000:07:01.0/dvb/dvb0.frontend0
23-01-18 23:03:20.564 [Debug   ] kaffeine.dev: Device Conexant CX24120/CX24118 (/dev/dvb/adapter0/frontend0) capabilities:
23-01-18 23:03:20.564 [Debug   ] kaffeine.dev:      CAN_2G_MODULATION
23-01-18 23:03:20.564 [Debug   ] kaffeine.dev:      CAN_FEC_1_2
23-01-18 23:03:20.564 [Debug   ] kaffeine.dev:      CAN_FEC_2_3
23-01-18 23:03:20.564 [Debug   ] kaffeine.dev:      CAN_FEC_3_4
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      CAN_FEC_4_5
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      CAN_FEC_5_6
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      CAN_FEC_6_7
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      CAN_FEC_7_8
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      CAN_FEC_AUTO
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      CAN_INVERSION_AUTO
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      CAN_QPSK
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      CAN_RECOVER
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: DVB API Version 5.10, Current v5 delivery system: DVBS
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: Supported delivery systems: 
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:     [DVBS]
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev:      DVBS2
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: supports lnb UNIVERSAL
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: supports lnb DBS
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: supports lnb EXTENDED
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: supports lnb STANDARD
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: supports lnb L10700
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: supports lnb L11300
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: supports lnb ENHANCED
23-01-18 23:03:20.565 [Debug   ] kaffeine.dev: supports lnb QPH031
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb C-BAND
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb C-MULT
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb DISHPRO
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb 110BS
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb STACKED-BRASILSAT
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb OI-BRASILSAT
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb AMAZONAS
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb AMAZONAS
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: supports lnb GVT-BRASILSAT
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: SEC: set voltage to OFF
23-01-18 23:03:20.566 [Info    ] kaffeine.dev: Found dvb device P13d0210313d02103: Conexant CX24120/CX24118
23-01-18 23:03:20.566 [Debug   ] kaffeine.dev: New device detected: /org/kde/solid/udev/sys/devices/pci0000:00/0000:00:1e.0/0000:07:01.0/dvb/dvb0.net0
23-01-18 23:03:20.606 [Debug   ] kaffeine.mediawidget: video resized to 0.0
23-01-18 23:03:20.609 [Warning ] Invalid Context= "stock" line for icon theme:  "/usr/share/icons/ubuntu-mono-dark/stock/16/"
23-01-18 23:03:20.609 [Warning ] Invalid Context= "stock" line for icon theme:  "/usr/share/icons/ubuntu-mono-dark/stock/22/"
23-01-18 23:03:20.609 [Warning ] Invalid Context= "stock" line for icon theme:  "/usr/share/icons/ubuntu-mono-dark/stock/24/"
23-01-18 23:03:20.609 [Warning ] Invalid Context= "stock" line for icon theme:  "/usr/share/icons/ubuntu-mono-dark/stock/32/"
23-01-18 23:03:20.609 [Warning ] Invalid Context= "stock" line for icon theme:  "/usr/share/icons/ubuntu-mono-dark/stock/48/"
23-01-18 23:03:20.609 [Warning ] Invalid Context= "stock" line for icon theme:  "/usr/share/icons/ubuntu-mono-dark/stock/64/"
23-01-18 23:03:20.609 [Warning ] Invalid Context= "stock" line for icon theme:  "/usr/share/icons/ubuntu-mono-dark/stock/128/"
23-01-18 23:03:24.577 [Debug   ] kaffeine.dev: Device Conexant CX24120/CX24118 (/dev/dvb/adapter0/frontend0) capabilities:
23-01-18 23:03:24.577 [Debug   ] kaffeine.dev:      CAN_2G_MODULATION
23-01-18 23:03:24.577 [Debug   ] kaffeine.dev:      CAN_FEC_1_2
23-01-18 23:03:24.577 [Debug   ] kaffeine.dev:      CAN_FEC_2_3
23-01-18 23:03:24.577 [Debug   ] kaffeine.dev:      CAN_FEC_3_4
23-01-18 23:03:24.577 [Debug   ] kaffeine.dev:      CAN_FEC_4_5
23-01-18 23:03:24.577 [Debug   ] kaffeine.dev:      CAN_FEC_5_6
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev:      CAN_FEC_6_7
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev:      CAN_FEC_7_8
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev:      CAN_FEC_AUTO
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev:      CAN_INVERSION_AUTO
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev:      CAN_QPSK
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev:      CAN_RECOVER
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev: DVB API Version 5.10, Current v5 delivery system: DVBS
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev: Supported delivery systems: 
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev:     [DVBS]
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev:      DVBS2
23-01-18 23:03:24.578 [Warning ] kaffeine.dev: Cannot open dvr /dev/dvb/adapter0/dvr0
23-01-18 23:03:24.578 [Debug   ] kaffeine.dev: SEC: set voltage to OFF
Last edited by Whynot; 01-23-2018 at 04:46 PM.
 
  


Reply
Page 2 of 2 1 2



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Conexant- Modem - Ubuntu -conexant cx20468 - URGENT javb Ubuntu 4 05-02-2007 07:58 PM
Avermedia DVBs capture card pyeco Linux - Newbie 5 05-23-2006 07:32 AM
Conexant Modem Help fatherg Linux - Hardware 1 04-05-2004 10:12 PM
Conexant Winmodem james.farrow Linux - Hardware 2 03-03-2003 10:19 PM
HP and conexant christyc Linux - General 2 01-15-2002 12:01 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 10:04 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration