Not Again!

It seems like im running into more Mplayer problems. After I did a ./configure and make install under su, I tried running mplayer and this is what i get under the console:

[Console]

[root@vl121-019 pawnshark]# mplayer filipi~1.mpg
MPlayer 1.0pre3-3.3.2 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 2128 MHz (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using Linux hardware RTC timing (1024Hz).
Can't open input config file /root/.mplayer/input.conf: No such file or directory
Can't open input config file /usr/local/etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config

Playing filipi~1.mpg.
LMLM4 Stream Format not found
MPEG-PS file format detected.
VIDEO: MPEG1 352x240 (aspect 12) 29.970 fps 664.8 kbps (83.1 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 6000->176400 (48.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Can't open /dev/fb0: No such device
[fbdev2] Can't open /dev/fb0: No such device
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
VDec: using Mpeg PES as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [null] 352x240 => 352x264 Mpeg PES
Selected video codec: [mpegpes] vfm:mpegpes (Mpeg PES output (.mpg or Dxr3/DVB card))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
A: 20.7 V: 20.7 A-V: 0.003 ct: 0.069 607/607 0% 0% 1.3% 2 0 0%

MPlayer interrupted by signal 2 in module: sleep_rtc
[root@vl121-019 pawnshark]#

(the "MPlayer interrupted by signal 2 in module: sleep_rtc" was a ctrl+c key combination)

I am new to linux and I am really clueless on what to do. Any help will be greatly appreciated

But does it work if launched from an X display ? it seems that it cannot locate the frame buffer driver (/dev/fb0), maybe because frame buffer support is missing.

Yea, that output was open from an X Window (Terminal in Gnome 2.4) As for the frame buffer, I'm not sure how it is found. I know that I just got my ATI 9600xt video card drivers 3.7.0 working under XFree 4.3.0 recently, and that could also be the problem. Do I have to set something in fglrxconfig or something else?