LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices

Reply
 
Search this Thread
Old 09-19-2012, 12:37 PM   #16
cpasqualini
Member
 
Registered: Dec 2010
Location: Concordia, Entre Ríos, Argentina
Distribution: Debian
Posts: 46

Rep: Reputation: 5

ok!
look at the other processes because there is one process listening on port 443.

the command:
netstat -ltvnp
the manpage of netstat is very useful

will give you the listening servers.
As example in my local computer i have:
Code:
 netstat -ltvnp |grep 80
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      3786/nginx
and yes, i have a local instance of NginX (another WebServer) running on port 80 (http)
in your case you are looking for a 443 process so you will execute:
Code:
netstat -ltvnp |grep 443
then, look what it is, see in /etc if there is some config about it.
if you know you can stop it, just stop it and then start apache.

if you have any doubt, tell me what's up

best regards
 
Old 09-19-2012, 01:33 PM   #17
JazzcatCB
LQ Newbie
 
Registered: Sep 2011
Posts: 18

Original Poster
Rep: Reputation: Disabled
I'm getting new messages in /etc/httpd/logs/error_log:
Code:
[Wed Sep 19 12:01:40 2012] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Wed Sep 19 12:01:40 2012] [warn] Init: (247370.railsacrosseurope-dev.com:443) You configured HTTP(80) on the standard HTTPS(443) port!
Does this make any sense to you?
 
Old 09-19-2012, 01:42 PM   #18
JazzcatCB
LQ Newbie
 
Registered: Sep 2011
Posts: 18

Original Poster
Rep: Reputation: Disabled
I tried 'netstat -ltvnp |grep 443' and it returned nothing. I also tried for port 80 with the same result.

Here's my netstat -ltvnp output:
Code:
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name
tcp        0      0 0.0.0.0:110                 0.0.0.0:*                   LISTEN      1921/tcpserver
tcp        0      0 0.0.0.0:143                 0.0.0.0:*                   LISTEN      1933/tcpserver
tcp        0      0 0.0.0.0:21                  0.0.0.0:*                   LISTEN      1909/xinetd
tcp        0      0 184.82.239.165:53           0.0.0.0:*                   LISTEN      1518/named
tcp        0      0 184.82.239.164:53           0.0.0.0:*                   LISTEN      1518/named
tcp        0      0 127.0.0.1:53                0.0.0.0:*                   LISTEN      1518/named
tcp        0      0 0.0.0.0:25                  0.0.0.0:*                   LISTEN      1909/xinetd
tcp        0      0 127.0.0.1:953               0.0.0.0:*                   LISTEN      1518/named
tcp        0      0 0.0.0.0:7776                0.0.0.0:*                   LISTEN      8131/kloxo.exe
tcp        0      0 0.0.0.0:7777                0.0.0.0:*                   LISTEN      8123/kloxo.httpd
tcp        0      0 0.0.0.0:993                 0.0.0.0:*                   LISTEN      1936/tcpserver
tcp        0      0 0.0.0.0:7778                0.0.0.0:*                   LISTEN      8123/kloxo.httpd
tcp        0      0 0.0.0.0:7779                0.0.0.0:*                   LISTEN      8131/kloxo.exe
tcp        0      0 0.0.0.0:995                 0.0.0.0:*                   LISTEN      1927/tcpserver
tcp        0      0 0.0.0.0:3306                0.0.0.0:*                   LISTEN      1686/mysqld
tcp        0      0 :::22                       :::*                        LISTEN      1545/sshd
tcp        0      0 ::1:953                     :::*                        LISTEN      1518/named
 
Old 09-19-2012, 01:45 PM   #19
cpasqualini
Member
 
Registered: Dec 2010
Location: Concordia, Entre Ríos, Argentina
Distribution: Debian
Posts: 46

Rep: Reputation: 5
at first view, it doesn't make any sense; but can explain why it was used the 443 port.

do you have a Listen 443 directive in any place of the configuration of Apache?

could you post your entire apache configuration files?
(please, hide sensible data if there is something)
 
Old 09-19-2012, 02:26 PM   #20
JazzcatCB
LQ Newbie
 
Registered: Sep 2011
Posts: 18

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by cpasqualini View Post
at first view, it doesn't make any sense; but can explain why it was used the 443 port.

do you have a Listen 443 directive in any place of the configuration of Apache?

could you post your entire apache configuration files?
(please, hide sensible data if there is something)
Here is httpd.conf:
Code:
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# Don't give away too much information about all the subcomponents
# we are running.  Comment out this line if you don't mind remote sites
# finding out what major optional modules you are running
ServerTokens OS

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile run/httpd.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 120

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive Off

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork ITK

# AssignUserID: Takes two parameters, uid and gid (or really, user name and
#  group name); specifies what uid and gid the vhost will run as
#  (after parsing the request etc., of course). Note that if you do not assign
#  a user ID, the default one from Apache will be used.

# MaxClientsVHost: A separate MaxClients for the vhost. This can be useful if,
#  say, half of your vhosts depend on some NFS server (like on our setup);
#  if the NFS server goes down, you do not want the children waiting forever
#  on NFS to take the non-NFS-dependent hosts down. This can thus act as a
#  safety measure, giving "server too busy" on the NFS-dependent vhosts
#  while keeping the other ones happily running. (Of course, you could use
#  it to simply keep one site from eating way too much resources, but there
#  are probably better ways of doing that.)

# NiceValue: Lets you nice some requests down, to give them less CPU time.

<IfModule itk.c>
StartServers       8
MinSpareServers    5
MaxSpareServers   20
ServerLimit      256
MaxClients       256
MaxRequestsPerChild  4000
</IfModule>

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# ServerLimit: maximum value for MaxClients for the lifetime of the server
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers       8
MinSpareServers    5
MaxSpareServers   20
ServerLimit      256
MaxClients       256
MaxRequestsPerChild  4000
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers         2
MaxClients         150
MinSpareThreads     25
MaxSpareThreads     75
ThreadsPerChild     25
MaxRequestsPerChild  0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80
#Listen 443

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
[DELETED]
#
# The following modules are not loaded by default:
#
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule asis_module modules/mod_asis.so

#
# Load config files from the config directory "/etc/httpd/conf.d".
#
Include conf.d/*.conf

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000;
#  don't use Group #-1 on these systems!
#
User apache
Group apache

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin root@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
#ServerName www.example.com:80
ServerName railsmp.us:80
#ServerName railsmp.us:443
#247370.railsacrosseurope-dev.com:443

#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
    Options FollowSymLinks
    AllowOverride All
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/www/html">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
    Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid.  This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#
<IfModule mod_userdir.c>
    #
    # UserDir is disabled by default since it can confirm the presence
    # of a username on the system (depending on home directory
    # permissions).
    #
    UserDir disabled

    #
    # To enable requests to /~user/ to serve the user's public_html
    # directory, remove the "UserDir disabled" line above, and uncomment
    # the following line instead:
    #
    #UserDir public_html

</IfModule>

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
#   MIMEMagicFile /usr/share/magic.mime
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
#
#EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
#
#EnableSendfile off
End of Part 1 of 2
 
Old 09-19-2012, 02:27 PM   #21
JazzcatCB
LQ Newbie
 
Registered: Sep 2011
Posts: 18

Original Poster
Rep: Reputation: Disabled
Here is Part 2 of 2:

Code:
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
# requires the mod_logio module to be loaded.
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog logs/access_log common

#
# If you would like to have separate agent and referer logfiles, uncomment
# the following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# For a single logfile with access, agent, and referer information
# (Combined Logfile Format), use the following directive:
#
CustomLog logs/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/www/icons/"

<Directory "/var/www/icons">
    Options Indexes MultiViews FollowSymLinks
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# WebDAV module configuration section.
#
<IfModule mod_dav_fs.c>
    # Location of the WebDAV lock database.
    DAVLockDB /var/lib/dav/lockdb
</IfModule>

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
#
[DELETED]

# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
#
[DELETED]

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default.  To use the
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz

#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz

# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
#   MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl    .crl

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
#
AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /var/www/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#

Alias /error/ "/var/www/error/"

<IfModule mod_negotiation.c>
<IfModule mod_include.c>
    <Directory "/var/www/error">
        AllowOverride None
        Options IncludesNoExec
        AddOutputFilter Includes html
        AddHandler type-map var
        Order allow,deny
        Allow from all
        LanguagePriority en es de fr
        ForceLanguagePriority Prefer Fallback
    </Directory>

#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

</IfModule>
</IfModule>

#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully

#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Proxy>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable a cache of proxied content, uncomment the following lines.
# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details.
#
#<IfModule mod_disk_cache.c>
#   CacheEnable disk /
#   CacheRoot "/var/cache/mod_proxy"
#</IfModule>
#

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80
#NameVirtualHost 247370.railsacrosseurope-dev.com:80

#
# NOTE: NameVirtualHost cannot be used without a port specifier
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
#

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

#<VirtualHost 247370.railsacrosseurope-dev.com:80>
#  ServerAdmin admin@247370.railsacrosseurope-dev.com
#  ServerName 184.82.239.164
#  DocumentRoot /www
#  ErrorLog logs/error_log
#  CustomLog logs/access_log combined
#</VirtualHost>

#include VirtualHosts config files
Include conf/vhosts/*.conf

#Kloxo

#Include /etc/httpd/conf/kloxo/kloxo.conf
 
Old 09-19-2012, 02:41 PM   #22
cpasqualini
Member
 
Registered: Dec 2010
Location: Concordia, Entre Ríos, Argentina
Distribution: Debian
Posts: 46

Rep: Reputation: 5
You haven't posted the files included in:
Code:
Include conf.d/*.conf
look there if it is any Port 443 line...

In the posted conf i see:
Listen 80
#Listen 443
ServerName railsmp.us:80
#ServerName railsmp.us:443

are you trying not to listen in 443 to debug??

i think that, for the VHost at 443 to work, you need to specify
Listen 80
Listen 443
otherwise, all will go to 80.

if you are trying to test apache with only the 80 instance, then move away the file dedicated to the 443 vhost int the
Code:
Include conf/vhosts/*.conf
(you can rename to from .conf to .no_conf)

your problem is there... you are seeing it, but it's so simple that you can't find it.
neither i can find it from here...

it seems to me that can be a good idea to just get apache with only port 80, and only when that works, to get 443 to work.
what you think?

keep searching... and tell me what can you find
 
Old 09-19-2012, 02:43 PM   #23
JazzcatCB
LQ Newbie
 
Registered: Sep 2011
Posts: 18

Original Poster
Rep: Reputation: Disabled
I only recently commented out "Listen 443" and "railsmp.us:443" (which used to be railsacrosseurope-dev.com:443)
 
Old 09-19-2012, 02:48 PM   #24
JazzcatCB
LQ Newbie
 
Registered: Sep 2011
Posts: 18

Original Poster
Rep: Reputation: Disabled
Here are the virtual host configs:

railsacrosseurope.80.conf:
Code:
# NameVirtualHost 184.82.239.164:80
NameVirtualHost *:80

<VirtualHost *:80>
    ServerAdmin admin@railsacrosseurope.com
    ServerName railsmp.us
    ServerAlias www.railsmp.us
    DocumentRoot /www/railsacrosseurope/public_html/public
    ScriptAlias /cgi-bin/ /www/railsacrosseurope/public_html/cgi-bin/
    ErrorLog /www/railsacrosseurope/logs/error_log
    CustomLog /www/railsacrosseurope/logs/access_log combined
    Alias /rails /www/railsacrosseurope/public_html/public
    php_admin_value disable_functions null

    <Directory "/www/railacrosseurope/public_html/public">
        AllowOverride All
        Order Deny,Allow
        Allow from all
    </Directory>
</VirtualHost>
railsacrosseurope.443.conf
Code:
# NameVirtualHost 184.82.239.164:80
NameVirtualHost *:443

<VirtualHost *:443>
    ServerAdmin admin@railsacrosseurope.com
    ServerName railsmp.us
    ServerAlias www.railsmp.us
    DocumentRoot /www/railsacrosseurope/public_html/public
    ScriptAlias /cgi-bin/ /www/railsacrosseurope/public_html/cgi-bin/
    ErrorLog /www/railsacrosseurope/logs/error_log
    CustomLog /www/railsacrosseurope/logs/access_log combined
    Alias /rails /www/railsacrosseurope/public_html/public
    php_admin_value disable_functions null
    SSLEngine on
    SSLCertificateFile /www/railsacrosseurope/public_html/application/secure/railsmp.us.crt
    SSLCertificateKeyFile /www/railsacrosseurope/public_html/application/secure/railsmp.key
    SSLCertificateChainFile /www/railsacrosseurope/public_html/application/secure/gd_bundle.crt

    <Directory "/www/railacrosseurope/public_html/public">
        AllowOverride All
        Order Deny,Allow
        Allow from all
    </Directory>
</VirtualHost>
 
Old 09-19-2012, 03:10 PM   #25
cpasqualini
Member
 
Registered: Dec 2010
Location: Concordia, Entre Ríos, Argentina
Distribution: Debian
Posts: 46

Rep: Reputation: 5
if you have commented out Listen 443 then move railsacrosseurope.443.conf to railsacrosseurope.443.conf_BAK
and then try to restart apache
 
Old 09-19-2012, 03:27 PM   #26
JazzcatCB
LQ Newbie
 
Registered: Sep 2011
Posts: 18

Original Poster
Rep: Reputation: Disabled
I did that. I ran 'apachectl start' and I got a warning that NameVirtualHost *:80 had no VirtualHosts. No error appeared.
I can now run w3m on localhost and I connect.
I still cannot connect via Chrome. I get unresolved server DNS address.
But I think we're making progress my friend
Thank you so much for your generous help.
 
Old 09-19-2012, 04:19 PM   #27
cpasqualini
Member
 
Registered: Dec 2010
Location: Concordia, Entre Ríos, Argentina
Distribution: Debian
Posts: 46

Rep: Reputation: 5
Quote:
Originally Posted by JazzcatCB View Post
NameVirtualHost *:80 had no VirtualHosts.
did you renamed the virtualhost definition of the port 80 too?
pls note that i've only recommended to rename the 443 file

about the DNS trouble
check in your computer (windows i guest) in the command line to do:

nslookup yourdomain

if it answers to the ip of the server; if not, there is another problem in the DNS
indeed further testing shows big troubles on this.
i've sent you an email privatelly
 
Old 09-19-2012, 06:13 PM   #28
Habitual
Senior Member
 
Registered: Jan 2011
Distribution: Undecided
Posts: 3,156
Blog Entries: 4

Rep: Reputation: 760Reputation: 760Reputation: 760Reputation: 760Reputation: 760Reputation: 760Reputation: 760
http://railsmp.us/ is working from here today and resolves to 184.82.239.165

When I navigate to that address I get a re-direct to facebook via However,,,
Code:
host railsacrosseurope.com
Host railsacrosseurope.com not found: 3(NXDOMAIN)

host railsacrosseurope-dev.com
railsacrosseurope-dev.com has address 97.74.182.128
railsacrosseurope-dev.com mail is handled by 10 mailstore1.secureserver.net.
railsacrosseurope-dev.com mail is handled by 0 smtp.secureserver.net.
railsacrosseurope.com remains unregistered.
railsacrosseurope-dev.com is pointed at a GoDaddy IP.

Edit:
re:
Quote:
Originally Posted by JazzcatCB View Post
I only recently commented out "Listen 443" and "railsmp.us:443" (which used to be railsacrosseurope-dev.com:443)
...
I'm pretty sure that no amount of apache.conf editing can get a domain that isn't registered pointed at your server/host, same for domains pointed away from that same server/host.

I could be wrong...

Last edited by Habitual; 09-19-2012 at 06:53 PM.
 
Old 09-19-2012, 06:53 PM   #29
JazzcatCB
LQ Newbie
 
Registered: Sep 2011
Posts: 18

Original Poster
Rep: Reputation: Disabled
Hi Habitual,

Thank you for your help. cpasqualini is helping me get this under control, which is why http access now works. railsacrosseurope.com is a defunct domain, and I don't use it. railsacrosseurope-dev.com is my development domain. Thanks again.
 
Old 09-19-2012, 06:55 PM   #30
Habitual
Senior Member
 
Registered: Jan 2011
Distribution: Undecided
Posts: 3,156
Blog Entries: 4

Rep: Reputation: 760Reputation: 760Reputation: 760Reputation: 760Reputation: 760Reputation: 760Reputation: 760
You are very welcome and Thank God for cpasqualini helping you out because my dns kung-fu is old and rusty.

I'll butt out now.
 
  


Reply

Tags
centos5


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" -- WITH STEPS! geodescent Linux - Software 3 07-30-2008 04:52 PM
"Fatal IO error 104 (connection reset by peer)" stops Mandriva starting NoobDave Mandriva 9 12-31-2007 04:20 PM
XIO: fatal IO error 04 (connection reset by peer) on X server ":0.0" Kernel 2.6.5 Slackware 15 10-28-2007 11:53 PM
XIO: fatal IO error 104 (Connection reset by peer) on X Server ":0.0" pizu Linux - Newbie 10 11-30-2006 01:57 AM
fatal IO error 104 (connection reset by peer) on X Server ":0.0" Post Modern Linux - Desktop 2 09-19-2006 11:14 PM


All times are GMT -5. The time now is 09:11 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration