Yast can configure the second card. Go to PCI Devices and see if both cards are listed. If YES, then install the second card as a LAN. If NO, then go to lspci and see the output. If listed set up LAN manually. If NOT listed, try another PCI slot on YOUR motherboard. YOU may not have to change anything. Try pressing the ethernet card in from the start. Take it out, slowly replace it. ALL the way down. If YOUR system is vertical, turn it on its side. So YOU can press down slowly on the ethernet card to make sure it is properly seated. Keep trying until the system recognizes the two cards. Then try Yast again.
|