Hello /bin/bash and Fransemail!
At this time, graphics are still running without DRI.
Do you have an idea of what can make modules load without errors, DRI being said enabled, and only glxinfo ang glxgears telling it is wrong?
This is my XFree86.0.log file after I ran NeverWinterNights (which starts, but is unplayable) :
# more /var/log/XFree86.0.log
XFree86 Version 4.3.99.12 (DRI trunk)
Release Date: 10 September 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.4 i686 [ELF]
Current Operating System: Linux medion 2.6.4 #4 Thu May 6 10:50:21 CEST 2004 i686
Build Date: 06 May 2004
Changelog Date: 10 September 2003
Before reporting problems, check
http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat May 8 22:48:26 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "LCD Monitor"
(**) | |-->Device "S3 ProSavage DDR-K"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unsca
led,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.7
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) PCI: Probing config type using method 1
.....................
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 2.0.4
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.1.27
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) SAVAGE: driver (version 1.1.27a) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR,
ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Chipset ProSavageDDR found
(II) resource ranges after xf86ClaimFixedResources() call:
............................................................
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using AGP 1x mode
(II) SAVAGE(0): Using 16 MB AGP aperture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavageDDR"
(--) SAVAGE(0): mapping MMIO @ 0xe0000000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 32768k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.7
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
(--) SAVAGE(0): - Limiting video mode to 1024x768
(II) SAVAGE(0): LCD Monitor: Using hsync range of 30.00-60.00 kHz
(II) SAVAGE(0): LCD Monitor: Using vrefresh range of 50.00-75.00 Hz
(II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Found 13 modes at this depth:
[10e] 320 x 200, 70Hz
[133] 320 x 240, 72Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[11d] 640 x 400, 70Hz
[111] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
[114] 800 x 600, 60Hz, 75Hz, 85Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
[17a] 1280 x 768, 60Hz
[14f] 1280 x 960, 60Hz, 85Hz
[11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[122] 1600 x 1200, 60Hz
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) SAVAGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
..................................................;
(==) SAVAGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.99.12, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
......................................................................
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): mapping framebuffer @ 0x90000000 with size 0x2000000
(==) SAVAGE(0): Write-combining range (0x90000000,0x2000000)
(II) SAVAGE(0): Splitting WC range: base: 0x92000000, size: 0x5000000
(II) SAVAGE(0): Splitting WC range: base: 0x94000000, size: 0x3000000
(==) SAVAGE(0): Write-combining range (0x96000000,0x1000000)
(==) SAVAGE(0): Write-combining range (0x94000000,0x3000000)
(==) SAVAGE(0): Write-combining range (0x92000000,0x5000000)
(II) SAVAGE(0): map aperture:0x423a9000
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): 4740 kB of Videoram needed for 3D; 32768 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+872: 3072
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) SAVAGE(0): [drm] loaded kernel module for "savage" driver
(II) SAVAGE(0): [drm] DRM interface version 1.2
(II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0"
(II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xce8a6000
(II) SAVAGE(0): [drm] mapped SAREA 0xce8a6000 to 0x473a9000
(II) SAVAGE(0): [drm] framebuffer handle = 0x90000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3156; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] agpTextures microcode handle = 0xa0000000
(II) SAVAGE(0): [agp] agpTextures mapped at 0x00000000
(II) SAVAGE(0): [drm] aperture handle = 0x92000000
(II) SAVAGE(0): [drm] Status handle = 0xce8ac000
(II) SAVAGE(0): [agp] Status page mapped at 0x473ab000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(II) SAVAGE(0): virtualX:1024,virtualY:768
(II) SAVAGE(0): bpp:16,tiledwidthBytes:2048,tiledBufferSize:1572864
(II) SAVAGE(0): bpp:16,widthBytes:2048,BufferSize:1572864
(II) SAVAGE(0): videoRambytes:0x02000000
(II) SAVAGE(0): textureSize:0x0195f000
(II) SAVAGE(0): textureSize:0x0195f000
(II) SAVAGE(0): textureOffset:0x00680000
(II) SAVAGE(0): depthOffset:0x00500000,depthPitch:2048
(II) SAVAGE(0): backOffset:0x00380000,backPitch:2048
(II) SAVAGE(0): Memory manager initialized to (0,0) (1024,1791)
(II) SAVAGE(0): Largest offscreen area available: 1024 x 1023
(II) SAVAGE(0): Reserved back buffer at offset 0x380000
(II) SAVAGE(0): Reserved depth buffer at offset 0x500000
(II) SAVAGE(0): Reserved 25980 kb for textures at offset 0x680000
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
28 128x128 slots
7 256x256 slots
(==) SAVAGE(0): Backing store disabled
(**) Option "dpms"
(**) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): X context handle = 0x00000001
(II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers] reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers] reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers] chipset:0x00000000
(II) SAVAGE(0): [junkers] sgram:0x00000000
(II) SAVAGE(0): [junkers] frontbufferSize:0x00180000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
.............................
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(**) SAVAGE(0): XvMC is enabled
(==) RandR enabled
.....................................................
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
SetClientVersion: 0 7
...........................................
(--) SAVAGE(0): Chose mode 114 at 60Hz.
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 36000
GetModeLine - hdsp: 800 hbeg: 824 hend: 896 httl: 1024
vdsp: 600 vbeg: 601 vend: 603 vttl: 625 flags: 5
GetModeLine - scrn: 0 clock: 36000
GetModeLine - hdsp: 800 hbeg: 824 hend: 896 httl: 1024
vdsp: 600 vbeg: 601 vend: 603 vttl: 625 flags: 5
SwitchToMode - scrn: 0 clock: 78800
hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
Checking against clock: 78800 (78800)
hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
(--) SAVAGE(0): Chose mode 117 at 75Hz.
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 78800
.........................
Checking against clock: 36000 (36000)
hdsp: 800 hbeg: 824 hend: 896 httl: 1024
vdsp: 600 vbeg: 601 vend: 603 vttl: 625 flags: 5
(--) SAVAGE(0): Chose mode 114 at 60Hz.
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 36000
GetModeLine - hdsp: 800 hbeg: 824 hend: 896 httl: 1024
vdsp: 600 vbeg: 601 vend: 603 vttl: 625 flags: 5
GetModeLine - scrn: 0 clock: 36000
GetModeLine - hdsp: 800 hbeg: 824 hend: 896 httl: 1024
vdsp: 600 vbeg: 601 vend: 603 vttl: 625 flags: 5
SwitchToMode - scrn: 0 clock: 78800
hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
Checking against clock: 78800 (78800)
hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
(--) SAVAGE(0): Chose mode 117 at 75Hz.
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 78800
..................................................................
(--) SAVAGE(0): Chose mode 114 at 60Hz.
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 36000
GetModeLine - hdsp: 800 hbeg: 824 hend: 896 httl: 1024
vdsp: 600 vbeg: 601 vend: 603 vttl: 625 flags: 5
GetModeLine - scrn: 0 clock: 36000
GetModeLine - hdsp: 800 hbeg: 824 hend: 896 httl: 1024
vdsp: 600 vbeg: 601 vend: 603 vttl: 625 flags: 5
SwitchToMode - scrn: 0 clock: 78800
hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
Checking against clock: 78800 (78800)
hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
(--) SAVAGE(0): Chose mode 117 at 75Hz.
SwitchToMode - Succeeded
Sorry for the length of the text. Hope you'll be able to give me pieces of advices. Thanks.