Enemy Territory: Quake Wars doesn't start

DaBlade · 02-07-2008, 06:22 AM

Hello. I just bought ETQW, and downloaded the latest Linux client (1.4). I installed it, and tried to run the game, with rather limited success. Can anyone help me out with it?

Also, as a side note, while browsing the output, it said that the system qualifies for low quality - what prevents it from going higher up than that?

Code:

darkapostrophe@Liberty:~/.etqw$ ./etqw.x86
ETQW 1.4.12247.12247  linux-x86 Jan  4 2008 13:52:05
found interface lo - loopback
found interface eth1 - 192.168.0.178/255.255.255.0
found interface wlan0 - 192.168.0.116/255.255.255.0
CPU: Intel CPU with MMX & SSE & SSE2 & SSE3
ETQW using generic code for SIMD processing
enabled Flush-To-Zero mode
------ Initializing File System ------
Loaded pk4 /home/darkapostrophe/.etqw/base/game000.pk4 with checksum 0x1eefa237
Loaded pk4 /home/darkapostrophe/.etqw/base/game002.pk4 with checksum 0x5f707685
Loaded pk4 /home/darkapostrophe/.etqw/base/pak000.pk4 with checksum 0x442eb08b
Loaded pk4 /home/darkapostrophe/.etqw/base/pak001.pk4 with checksum 0x10e16e6
Loaded pk4 /home/darkapostrophe/.etqw/base/pak002.pk4 with checksum 0x8dbe7353
Loaded pk4 /home/darkapostrophe/.etqw/base/pak003.pk4 with checksum 0x99dfcabb
Loaded pk4 /home/darkapostrophe/.etqw/base/pak004.pk4 with checksum 0x7e49f838
Loaded pk4 /home/darkapostrophe/.etqw/base/pak005.pk4 with checksum 0x5ccc7213
Loaded pk4 /home/darkapostrophe/.etqw/base/pak006.pk4 with checksum 0x9edf1b7d
Loaded pk4 /home/darkapostrophe/.etqw/base/pak007.pk4 with checksum 0x74a1a2f
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_english000.pk4 with checksum 0x977c7bd0
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_english001.pk4 with checksum 0x6583cd8
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_english002.pk4 with checksum 0x8dc70e3d
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_french001.pk4 with checksum 0x3bd7a062
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_french002.pk4 with checksum 0x79287190
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_german001.pk4 with checksum 0xa694c3f1
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_german002.pk4 with checksum 0x64bee731
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_korean000.pk4 with checksum 0xd42c084
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_korean001.pk4 with checksum 0x4de6a4e7
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_korean002.pk4 with checksum 0x15d2c9af
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_polish001.pk4 with checksum 0x2575ff8e
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_polish002.pk4 with checksum 0x3ab92dd6
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_russian001.pk4 with checksum 0xf3e91581
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_russian002.pk4 with checksum 0x38b1a37c
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_spanish001.pk4 with checksum 0xd609566c
Loaded pk4 /home/darkapostrophe/.etqw/base/zpak_spanish002.pk4 with checksum 0xcf994ada
Current search path:
/home/darkapostrophe/.etqwcl/base
/home/darkapostrophe/.etqw/base
/home/darkapostrophe/.etqw/base/zpak_spanish002.pk4 (119 files)
/home/darkapostrophe/.etqw/base/zpak_spanish001.pk4 (13 files)
/home/darkapostrophe/.etqw/base/zpak_russian002.pk4 (119 files)
/home/darkapostrophe/.etqw/base/zpak_russian001.pk4 (13 files)
/home/darkapostrophe/.etqw/base/zpak_polish002.pk4 (119 files)
/home/darkapostrophe/.etqw/base/zpak_polish001.pk4 (13 files)
/home/darkapostrophe/.etqw/base/zpak_korean002.pk4 (12 files)
/home/darkapostrophe/.etqw/base/zpak_korean001.pk4 (12 files)
/home/darkapostrophe/.etqw/base/zpak_korean000.pk4 (6 files)
/home/darkapostrophe/.etqw/base/zpak_german002.pk4 (119 files)
/home/darkapostrophe/.etqw/base/zpak_german001.pk4 (13 files)
/home/darkapostrophe/.etqw/base/zpak_french002.pk4 (119 files)
/home/darkapostrophe/.etqw/base/zpak_french001.pk4 (13 files)
/home/darkapostrophe/.etqw/base/zpak_english002.pk4 (117 files)
/home/darkapostrophe/.etqw/base/zpak_english001.pk4 (9 files)
/home/darkapostrophe/.etqw/base/zpak_english000.pk4 (1018 files)
/home/darkapostrophe/.etqw/base/pak007.pk4 (1510 files)
/home/darkapostrophe/.etqw/base/pak006.pk4 (3 files)
/home/darkapostrophe/.etqw/base/pak005.pk4 (2172 files)
/home/darkapostrophe/.etqw/base/pak004.pk4 (72 files)
/home/darkapostrophe/.etqw/base/pak003.pk4 (1133 files)
/home/darkapostrophe/.etqw/base/pak002.pk4 (1637 files)
/home/darkapostrophe/.etqw/base/pak001.pk4 (1067 files)
/home/darkapostrophe/.etqw/base/pak000.pk4 (9350 files)
/home/darkapostrophe/.etqw/base/game002.pk4 (3 files)
/home/darkapostrophe/.etqw/base/game000.pk4 (3 files)
game DLL: 0x0 in pak: 0x0
Addon pk4s:
file system initialized.
--------------------------------------
----- Initializing Decls -----
Decompressing the global token cache...3560Kb
------------------------------
couldn't exec 'etqwconfig.cfg'
execing 'localization/english/defaultbinds.cfg'
couldn't exec 'etqwbinds.cfg'
couldn't exec 'autoexec.cfg'
Vendor: Device:
/proc/cpuinfo CPU frequency: 2000 MHz
parse /proc/cpuinfo for CPU information
2 logical, 1 physical CPU(s)
detecting video ram (set sys_videoRam on command line to override) ..
found XNVCtrl extension 1.14
Detected
        1 2.00 GHz CPU
        2016 MB of System memory
        512 MB of Video memory on an optimal video architecture

This system qualifies for Low quality.
Initializing SDL subsystem
Loading GL driver 'libGL.so.1' through SDL
Desktop resolution: 1680x1050
execing 'specs/minspec.dat'
execing 'specs/minspec_cpu.dat'
execing 'specs/minspec_gamedetail.dat'
execing 'specs/minspec_gpu.dat'
execing 'specs/minspec_gpudetail.dat'
execing 'specs/minspec_lighting.dat'
execing 'specs/minspec_foliage.dat'
Vendor: Device:
execing 'specs/minspec_foliage.dat'
Opening IP socket: localhost:-1
Failed to open server license code file for reading.
thread priority set to 1
SDL_ListModes:
1680x1050 1600x1024 1440x900 1280x1024 1280x960 1280x800 1280x768 1024x768 960x600 840x525 800x600
800x512 720x450 700x525 640x512 640x480 640x400 640x384 512x384 400x300 320x240
SDL_ListModes are currently ignored for resolution filtering. Set r_useSDLModes to 1 if you want it
WARNING: SDL_SetVideoMode failed: Couldn't find matching GLX visual
------- Initializing renderSystem --------
----- R_InitOpenGL -----
signal caught: 'Segmentation fault', si_code 1
callstack:
0x0
[0x082e7e71]
[0x082e523d]
[0xffffe600]
Trying to exit gracefully..
--------------- BSE Shutdown ----------------
---------------------------------------------
Shutting down SDL subsystem
idRenderSystem::Shutdown()

Hardware info:

Laptop model: Zepto Znote 6625WD
CPU: Intel C2D T7300
RAM: 2GB
GFX: GeForce 8600M GT
Distro: Debian Sid
Arch: x86-64
uname -r:2.6.22-2-amd64
X Driver: nVidia 169.09
Xorg version: 7.3

V3nn3tj3 · 02-07-2008, 10:51 AM

Well, i still play wolfenstien:enemy territory and fun to see they use pak4 files instead of pak3 files, anyway.

SDL_SetVideoMode failed: Couldn't find matching GLX visual

This is because you are using a wrong video card driver or a wrong config.

Try this forum: http://community.enemyterritory.com

Greets V3n

DaBlade · 02-08-2008, 05:59 PM

I've got the latest nVidia driver installed, so what might be wrong with the config? Want my xorg.conf?

jens · 02-08-2008, 06:48 PM

Quote:

Originally Posted by DaBlade

I've got the latest nVidia driver installed, so what might be wrong with the config? Want my xorg.conf?

Is your default color depth set to 24 ?

DaBlade · 02-08-2008, 08:21 PM

I'll just paste my xorg.conf, that should answer any related questions.

Code:

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "no"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "HorizScrollDelta"      "0"
        Option          "SHMConfig"             "on"
EndSection

Section "Device"
        Identifier      "NVIDIA GeForce 8600M GT"
        Driver          "nvidia"
        BusID           "PCI:1:0:0"
        Option          "UseFBDev"              "true"
EndSection

Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
        HorizSync       30-90
        VertRefresh     50-60
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "NVIDIA GeForce 8600M GT"
        Monitor         "Generic Monitor"
        DefaultDepth    24
        SubSection "Display"
                Modes           "1680x1050" "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "Synaptics Touchpad"
EndSection

DaBlade · 02-10-2008, 08:42 AM

Oops, I apparently forgot to install the ia32-libs package, it works now... my bad... :P

Micro420 · 02-10-2008, 11:26 PM

And this is why I avoid using 64-bit OS's! Had a hell of a time getting common applications to work with my CentOS x64. I went back to 32-bit and things "just work".

Does ET:QW run well in Linux? Was thinking of getting it, but I played the demo in Windows Vista and I didn't enjoy it too much. I still like Enemy Territory better.

Chealer · 03-11-2008, 02:49 AM

Works pretty well here.