yup why suse (9.3) booting is slow? I need to get in X windows for 1mnt 20 sec.....wow that's boring.....
can anyone help me.....this is my boot.msg...
Inspecting /boot/System.map-2.6.11.4-20a-default
Loaded 22815 symbols from /boot/System.map-2.6.11.4-20a-default.
Symbols match kernel version 2.6.11.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.11.4-20a-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Wed Mar 23 21:52:37 UTC 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>On node 0 totalpages: 131056
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 126960 pages, LIFO batch:16
<7> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.2 present.
<7>ACPI: RSDP (v000 Nvidia ) @ 0x000f7550
<7>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
<7>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
<7>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff79c0
<7>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x4008
<6>ACPI: local apic disabled
<4>Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/hdb6 vga=0x317 selinux=0 splash=silent resume=/dev/hdb5
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order: 11, 32768 bytes)
<4>Detected 1830.126 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 514100k/524224k available (1865k kernel code, 9468k reserved, 659k data, 204k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<7>Calibrating delay loop... 3620.86 BogoMIPS (lpj=1810432)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD Athlon(tm) XP 2500+ stepping 00
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1430k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 1c28)
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfbc60, last bus=2
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20050211
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
<4>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
<4>ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
<4>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
<4>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
<4>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
<4>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
<4>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
<4>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 11 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>TC classifier action (bugs to
netdev@oss.sgi.com cc
hadi@cyberus.ca)
<6>pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
<6>pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
<6>pnp: 00:00: ioport range 0x4400-0x447f has been reserved
<6>pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
<6>pnp: 00:00: ioport range 0x4200-0x427f has been reserved
<6>pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
<6>pnp: 00:01: ioport range 0x5000-0x503f has been reserved
<6>pnp: 00:01: ioport range 0x5100-0x513f has been reserved
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<3>audit(1116913406.834:0): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xb0000000, mapped to 0xe0880000, using 6144k, total 131072k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=84
<6>vesafb: protected mode interface info at c000:57ad
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 57135 bytes,<6>...found (1024x768, 36789 bytes, v3).
<4>Console: switching to colour frame buffer device 127x44
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<4>PNP: PS/2 controller doesn't have AUX irq; using default 0xc
<6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
<4>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>NET: Registered protocol family 1
<7>PM: Checking swsusp image.
<7>PM: Resume from disk failed.
<4>ACPI wakeup devices:
<4>HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<5>SCSI subsystem initialized
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>NFORCE2: IDE controller at PCI slot 0000:00:09.0
<6>NFORCE2: chipset revision 162
<6>NFORCE2: not 100% native mode: will probe irqs later
<4>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
<4>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
<6>NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda
MA, hdb
MA
<6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc
MA, hdd
MA
<7>Probing IDE interface ide0...
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<4>hdb: ST3120026A, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<4>hdc: ASUS DVD-E616P2, ATAPI CD/DVD-ROM drive
<4>hdd: ATAPI DVD DUAL 8X4X12, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<7>libata version 1.10 loaded.
<7>sata_sil version 0.8
<4>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
<4>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ata1: SATA max UDMA/100 cmd 0xE081C080 ctl 0xE081C08A bmdma 0xE081C000 irq 11
<6>ata2: SATA max UDMA/100 cmd 0xE081C0C0 ctl 0xE081C0CA bmdma 0xE081C008 irq 11
<7>ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
<6>ata1: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
<6>ata1: dev 0 configured for UDMA/100
<6>scsi0 : sata_sil
<6>ata2: no device found (phy stat 00000000)
<6>scsi1 : sata_sil
<5> Vendor: ATA Model: ST3120827AS Rev: 3.42
<5> Type: Direct-Access ANSI SCSI revision: 05
<5>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 < sda5 >
<5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<6>hdb: max request size: 1024KiB
<6>hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
<6>hdb: cache flushes supported
<6> hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 >
<6>hdc: ATAPI 16X DVD-ROM drive, 512kB Cache
<6>Uniform CD-ROM driver Revision: 3.20
<6>hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
<4>Attempting manual resume
<7>PM: Checking swsusp image.
<3>swsusp: Suspend partition has wrong signature?
<7>PM: Resume from disk failed.
<5>ReiserFS: hdb6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb6: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb6: checking transaction log (hdb6)
<5>ReiserFS: hdb6: Using r5 hash to sort names
<6>bootsplash: status on console 0 changed to on
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding 1028120k swap on /dev/hdb5. Priority:42 extents:1
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel@redhat.com
<6>NTFS driver 2.1.22 [Flags: R/W MODULE].
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Tue May 24 05:43:44 2005
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>checkproc: /sbin/udevd 2543
Starting D-BUS daemon<notice>startproc: execve (/usr/bin/dbus-daemon-1) [ /usr/bin/dbus-daemon-1 --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon-1 ]
done
Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneSetting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: nVidia Corporation nForce2 Ethernet Controller (rev a1)
eth0 No configuration found for eth0
unused modem0
modem0 Startmode is 'manual'
skippedSetting up service network . . . . . . . . . . . . . . . .done
Starting mdnsd<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/rendezvous.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
done
Starting the netdaemon<notice>startproc: execve (/opt/gnome/bin/netdaemon) [ /opt/gnome/bin/netdaemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/opt/gnome/bin/netdaemon ]
done
Starting nfsboot (sm-notify) done
Initializing random number generatordone
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
Starting sound driverdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
<notice>startproc: execve (/usr/sbin/fam) [ /usr/sbin/fam -t 4 -T 0 -L ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/fam ]
Starting File Access Monitoring Daemonfailed
Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
loading ACPI modules (ac battery button <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.85 INIT=/sbin/init KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg LANG=en_US.UTF-8 ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=en_US.UTF-8 splash=silent SPLASH=yes LC_TIME= ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -x /usr/lib/powersave/scripts -a resmgr -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdb6 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
fan processor thermal ) done
Starting powersaved (accessing ACPI events over acpid) done
Starting service kdmdone
Starting service kdmdone
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: fam
<notice>killproc: kill(2752,3)
is there something wrong?
tell me...please
