Synaptics Touchpad Problems

joek1010 · 03-13-2007, 06:19 PM

Hi. I hope I'm posting to the right forum, I apologize if I'm not.

I'm definitely a Linux noob. I've worked with OS X a bit, as well as a bit with Ubuntu, but never really setting up a system on my own, so bear with me, I'm definitely a noob

.

I recently installed Slackware 11 from the installation DVD. I correctly configured X with my synaptics touchpad using device = "psaux". I had everything generally functioning.

After installing, I figured out that my Wireless NIC (a 3945abg Intel Proset card) only supports the 2.6 kernel. So I upgraded the kernel using the generic kernel (2.6.18-generic) that ships with the DVD (under the test directory, I think). I didn't setup an initrd because my Linux partition is ext2.

When I booted my laptop with the 2.6 kernel, my touchpad stopped working. Linux doesn't even detect the hardware. When I enter "cat /proc/bus/input/devices" it only displays my keyboard.

My question is, how can I detect my Synaptics PS/2 touchpad? Also, from some googling I did I figured out that psmouse has to be initialized at boot (before anything dealing with USB). Is psmouse started by default in the 2.6.18-generic kernel?

Thanks in advance.

H_TeXMeX_H · 03-13-2007, 10:03 PM

Did you install the modules ? They're in 'testing/packages/linux-2.6.18' of the install CD/DVD, something like 'kernel-modules-2.6.18-i486-1.tgz'

joek1010 · 03-14-2007, 05:24 PM

Thanks for the response. I installed kernel-modules-2.6.18-1.tgz using "installpkg". When I rebooted, the screen went blank after loading several of the new modules. How can I boot linux to a command prompt without loading the newly installed modules (so I can remove the one that crashes when I boot)? I think the the agp module is the problem. I have an nVidia graphics card (which isn't supposed to need the apg module, right?) and its not on an AGP port, its PCI-e.

H_TeXMeX_H · 03-14-2007, 06:13 PM

There's a similar thread here:

http://www.linuxquestions.org/questi...ight=blacklist

I would try blacklisting it.

http://www.linuxquestions.org/questi...ight=blacklist

joek1010 · 03-14-2007, 10:00 PM

Ok, checked out those posts that you mentioned. Unfortunately, after commenting out everything in rc.modules (except for the part at the beginning about updating module dependecies or something), as well as everything in rc.modules-2.6.18 (except the update code again), I still can't get it to boot. I have basically the same issue as this post (http://www.linuxquestions.org/questi...ight=blacklist).

Oh, I also blacklisted a bunch of stuff. Here's the stuff I black listed (in addition to everything that was already in the blacklist file):

Code:

blacklist apm
blacklist acpis
blacklist pcspkr
blacklist plip
blacklist quota_v1
blacklist agpgart
blacklist ide-scsi
blacklist toshiba_acpi
blacklist asus_acpi
blacklist ibm_acpi
blacklist ntfs

(Not sure about the last one. I noticed on dmesg that the last output was about the NTFS driver, so I added blacklist ntfs, which didn't do anything).

Here's my dmesg from the last failed boot:

Code:

Linux version 2.6.18 (root@tree) (gcc version 3.4.6) #1 Wed Sep 20 03:01:24 CDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
 BIOS-e820: 000000007fe80000 - 000000007fe8b000 (ACPI data)
 BIOS-e820: 000000007fe8b000 - 000000007ff00000 (ACPI NVS)
 BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 523904
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 294528 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f76b0
ACPI: RSDT (v001 MSTEST TESTONLY 0x06040000  LTP 0x00000000) @ 0x7fe85548
ACPI: FADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe8acaa
ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe8ad1e
ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe8ad86
ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe8adbe
ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x7fe8adfa
ACPI: SLIC (v001 MSTEST TESTONLY 0x06040000  LTP 0x00000000) @ 0x7fe8ae62
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x7fe8afd8
ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x7fe865b8
ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x7fe85f1c
ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe85594
ACPI: DSDT (v001 INTEL  CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Detected 1828.896 MHz processor.
Built 1 zonelists.  Total pages: 523904
Kernel command line: BOOT_IMAGE=2.6.18 ro root=802 nohotplug
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073900k/2095616k available (2204k kernel code, 20588k reserved, 717k data, 184k init, 1178112k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Using HPET for base-timer
Calibrating delay using timer specific routine.. 3661.93 BogoMIPS (lpj=7323861)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0ca0)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: 2000-2fff
  MEM window: d8000000-d9ffffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 3000-3fff
  MEM window: d4000000-d5ffffff
  PREFETCH window: d0000000-d1ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 4000-4fff
  MEM window: d6000000-d7ffffff
  PREFETCH window: d2000000-d3ffffff
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bus 7, cardbus bridge: 0000:06:07.0
  IO window: 00005400-000054ff
  IO window: 00005800-000058ff
  PREFETCH window: 88000000-89ffffff
  MEM window: 8c000000-8dffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 5000-5fff
  MEM window: da000000-da0fffff
  PREFETCH window: 88000000-8affffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdd: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
scsi0 : ata_piix
ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48 
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
  Vendor: ATA       Model: WDC WD1200BEVS-6  Rev: 01.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
usbmon: debugfs is not available
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Time: tsc clocksource has been installed.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 184k freed
input: AT Translated Set 2 keyboard as /class/input/input0
input: PS/2 Synaptics TouchPad as /class/input/input1
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.

I didn't notice anything that looked like it would cause linux to crash, but I really don't know what I'm looking for. On the plus side, it looks like it found my touchpad

. Thanks again for the help.

H_TeXMeX_H · 03-14-2007, 10:23 PM

Hmmm ... so your processor is a core duo. Maybe you could try compiling the newest version of the Linux kernel.

bioe007 · 03-14-2007, 10:55 PM

these lines look suspicious to my highly untrained eye...

Quote:

<snip>
PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
<snip>
libata version 2.00 loaded.

I don't know what your lspci | grep 01:00 shows, but mine is my video card. So I'm wondering what vga option you pass to kernel? If after loading AGP its crashing might have some problem with your PCI-e support in the 2.6.18 kernel thats prepackaged?

AFIK libata isn't used anymore, but rather under SCSI support SATA controllers should be selected that match your machine. You should be able to see that in LSPCI also. Then probably have to try configuring your own kernel. Also might not be a terrible thing to try huge26.s if you're not into compiling your own kernels.

<edit> ok, well AFIK isnt very far, I just dmesg | grep libata and I get the same on my sata laptop.

I guess the video stuff is the problem. Do you still have a kernel you can boot into and compile your own kernel with?

joek1010 · 03-14-2007, 11:41 PM

If it means anything, I tried disabling dual core processing through the BIOS and then booting, but it still didn't work. I've also tried booting the Backtrack Live CD, which is based on the 2.6.20 kernel. The screen also went black when I booted Backtrack.

I got my graphics card as well, "nVidia device", when I used "lspci | grep 01:00". I have a pretty recent graphics card (GeForce Go 7950 GTX, 512 mb). Could it be a graphics card driver issue? I never installed the drivers that nVidia has for their card under the 2.4 kernel; I just used the VESA drivers. I was going to install my wireless card first because I figured it would be more useful to have internet access to download drivers for other devices (like my graphics card). I added "blacklist nvidiafb" to my blacklist file, but I still got a black screen.

After watching my system boot a few more times, I've noticed that some of the last information to appear is PCMCIA related. I thought this was a bit strange because there is nothing about PCMCIA in the dmesg file. Is it possible that the real problem isn't being logged?

I can still boot to the 2.6.18 kernel with the boot option "nohotplug", so I could compile a kernel. Do you know of any good kernel compiling tutorials that I could follow?

Edit: Just read your signature, bioe007. I'll check out that guide now.

H_TeXMeX_H · 03-15-2007, 04:14 PM

There's also the sticky on the Slackware forum:

http://www.linuxquestions.org/questi...d.php?t=127095

And this guide:

http://www.kroah.com/lkn/

joek1010 · 03-15-2007, 06:22 PM

I reinstalled slackware 11 today, but this time with the huge26.s kernel (because it seems a lot of people here use that). After booting successfully and installing modules, I still get the same black screen. However, if I boot with "nohotplug", I can now use my touchpad (and usb devices, like a usb mouse). I'm going to continue to try to figure out which module is causes the system to crash.

masonm · 03-15-2007, 06:22 PM

The 2.6.18 kernel that shipped with Slack 11 has some sort of problem. I as well as several other people experienced some trouble when trying to use that kernel. Download one from a mirror or even better from kernel.org and compile it. That solved my mystery problems with that kernel.

I'd also recommend patching it with the synaptic patch as this will add some additional functionality for your touchpad through the kernel.

bioe007 · 03-15-2007, 06:25 PM

what does dmesg say now with huge26.s?

just curious.

joek1010 · 03-16-2007, 03:12 PM

Here's the dmesg generated by the failed boot.

Code:

rnel code, 24344k reserved, 1542k data, 284k init, 1178112k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1828.779 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 3662.30 BogoMIPS (lpj=7324615)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
CPU: After vendor identify, caps: afebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afebfbff 20100000 00000000 00000140 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
ACPI: setting ELCR to 0200 (from 0ca0)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: 2000-2fff
  MEM window: d8000000-d9ffffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 3000-3fff
  MEM window: d4000000-d5ffffff
  PREFETCH window: d0000000-d1ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 4000-4fff
  MEM window: d6000000-d7ffffff
  PREFETCH window: d2000000-d3ffffff
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bus 7, cardbus bridge: 0000:06:07.0
  IO window: 00005400-000054ff
  IO window: 00005800-000058ff
  PREFETCH window: 88000000-89ffffff
  MEM window: 8c000000-8dffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 5000-5fff
  MEM window: da000000-da0fffff
  PREFETCH window: 88000000-8affffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.27 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 2.6.10)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdd: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2409]-mh1)
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.6
Copyright(c) 2004-2006 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
GDT-HA: Storage RAID Controller Driver. Version: 3.04 
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
ata1: dev 0 cfg 49:2f00 82:7069 83:7c09 84:6023 85:7069 86:3c09 87:6023 88:203f
ata1: dev 0 ATA-7, max UDMA/100, 234441648 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi2 : ata_piix
  Vendor: ATA       Model: WDC WD1200BEVS-6  Rev: 01.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
st: Version 20050830, fixed bufsize 32768, s/g segs 256
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
sd 2:0:0:0: Attached scsi disk sda
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.09
Fusion MPT FC Host driver 3.03.09
Fusion MPT SAS Host driver 3.03.09
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:06:07.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[da006000-da0067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 5, io mem 0xda304000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 7, io base 0x00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3641.000 MB/sec
raid5: using function: pIII_sse (3641.000 MB/sec)
raid6: int32x1    431 MB/s
raid6: int32x2    442 MB/s
raid6: int32x4    307 MB/s
raid6: int32x8    290 MB/s
raid6: mmxx1     1335 MB/s
raid6: mmxx2     1482 MB/s
raid6: sse1x1     906 MB/s
raid6: sse1x2    1194 MB/s
raid6: sse2x1    1666 MB/s
raid6: sse2x2    2166 MB/s
raid6: using algorithm sse2x2 (2166 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices: 
LID0 PWRB SLPB HDEF PXS1 PXS2 PXS3 GLAN MODM 
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 284k freed
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
input: PS/2 Synaptics TouchPad as /class/input/input2
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
Capability LSM initialized
NTFS volume version 3.1.
NTFS volume version 3.1.

joek1010 · 03-16-2007, 03:13 PM

Here's syslog. Don't know if this will be any helpful, but this looks a lot more like what I can see near the end of the boot. I can see something about firmware, which also appears on the second to last line of syslog.

Code:

Mar 15 16:06:06 darkstar kernel: Console: colour VGA+ 80x25
Mar 15 16:06:06 darkstar kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 15 16:06:06 darkstar kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 16:06:06 darkstar kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 15 16:06:06 darkstar kernel: Using HPET for base-timer
Mar 15 16:06:06 darkstar kernel: Using HPET for gettimeofday
Mar 15 16:06:06 darkstar kernel: Detected 1828.814 MHz processor.
Mar 15 16:06:06 darkstar kernel: Calibrating delay using timer specific routine.. 3662.25 BogoMIPS (lpj=7324510)
Mar 15 16:06:06 darkstar kernel: Mount-cache hash table entries: 512
Mar 15 16:06:06 darkstar kernel: monitor/mwait feature present.
Mar 15 16:06:06 darkstar kernel: using mwait in idle threads.
Mar 15 16:06:06 darkstar kernel: CPU: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
Mar 15 16:06:06 darkstar kernel: ACPI: setting ELCR to 0200 (from 0ca0)
Mar 15 16:06:06 darkstar kernel: Setting up standard PCI resources
Mar 15 16:06:06 darkstar kernel: PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
Mar 15 16:06:06 darkstar kernel: Please report the result to linux-kernel to fix this permanently
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Mar 15 16:06:06 darkstar kernel: PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
Mar 15 16:06:06 darkstar kernel: PCI: Bus 7, cardbus bridge: 0000:06:07.0
Mar 15 16:06:06 darkstar kernel:   IO window: 00005400-000054ff
Mar 15 16:06:06 darkstar kernel:   IO window: 00005800-000058ff
Mar 15 16:06:06 darkstar kernel:   PREFETCH window: 88000000-89ffffff
Mar 15 16:06:06 darkstar kernel:   MEM window: 8c000000-8dffffff
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Mar 15 16:06:06 darkstar kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 15 16:06:06 darkstar kernel: TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
Mar 15 16:06:06 darkstar kernel: TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 16:06:06 darkstar kernel: highmem bounce pool size: 64 pages
Mar 15 16:06:06 darkstar kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 15 16:06:06 darkstar kernel: assign_interrupt_mode Found MSI capability
Mar 15 16:06:06 darkstar last message repeated 3 times
Mar 15 16:06:06 darkstar kernel: floppy0: no floppy controllers found
Mar 15 16:06:06 darkstar kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar 15 16:06:06 darkstar kernel: Compaq SMART2 Driver (v 2.6.0)
Mar 15 16:06:06 darkstar kernel: ide0: I/O resource 0x1F0-0x1F7 not free.
Mar 15 16:06:06 darkstar kernel: ide0: ports already in use, skipping probe
Mar 15 16:06:06 darkstar kernel: hdd: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
Mar 15 16:06:06 darkstar kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 15 16:06:06 darkstar kernel: ide-floppy driver 0.99.newide
Mar 15 16:06:06 darkstar kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Mar 15 16:06:06 darkstar kernel: scsi: <fdomain> Detection failed (no card)
Mar 15 16:06:06 darkstar kernel: Emulex LightPulse Fibre Channel SCSI driver 8.1.6
Mar 15 16:06:06 darkstar kernel: Copyright(c) 2004-2006 Emulex.  All rights reserved.
Mar 15 16:06:06 darkstar kernel: Failed initialization of WD-7000 SCSI card!
Mar 15 16:06:06 darkstar kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04 
Mar 15 16:06:06 darkstar kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Mar 15 16:06:06 darkstar kernel: 3ware Storage Controller device driver for Linux v1.26.02.001.
Mar 15 16:06:06 darkstar kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Mar 15 16:06:06 darkstar kernel: ata: 0x170 IDE port busy
Mar 15 16:06:06 darkstar kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
Mar 15 16:06:06 darkstar kernel:    pIII_sse  :  3641.000 MB/sec
Mar 15 16:06:06 darkstar kernel: raid5: using function: pIII_sse (3641.000 MB/sec)
Mar 15 16:06:06 darkstar kernel: raid6: int32x1    430 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: int32x2    442 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: int32x4    307 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: int32x8    290 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: mmxx1     1335 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: mmxx2     1482 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: sse1x1     906 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: sse1x2    1194 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: sse2x1    1666 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: sse2x2    2167 MB/s
Mar 15 16:06:06 darkstar kernel: raid6: using algorithm sse2x2 (2167 MB/s)
Mar 15 16:06:06 darkstar kernel: Using IPI Shortcut mode
Mar 15 16:06:06 darkstar kernel: ACPI wakeup devices: 
Mar 15 16:06:06 darkstar kernel: LID0 PWRB SLPB HDEF PXS1 PXS2 PXS3 GLAN MODM 
Mar 15 16:06:06 darkstar kernel: VFS: Mounted root (ext2 filesystem) readonly.
Mar 15 16:35:59 darkstar kernel: Console: colour VGA+ 80x25
Mar 15 16:35:59 darkstar kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 15 16:35:59 darkstar kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 16:35:59 darkstar kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 15 16:35:59 darkstar kernel: Using HPET for base-timer
Mar 15 16:35:59 darkstar kernel: Using HPET for gettimeofday
Mar 15 16:35:59 darkstar kernel: Detected 1828.784 MHz processor.
Mar 15 16:35:59 darkstar kernel: Calibrating delay using timer specific routine.. 3662.29 BogoMIPS (lpj=7324597)
Mar 15 16:35:59 darkstar kernel: Mount-cache hash table entries: 512
Mar 15 16:35:59 darkstar kernel: monitor/mwait feature present.
Mar 15 16:35:59 darkstar kernel: using mwait in idle threads.
Mar 15 16:35:59 darkstar kernel: CPU: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
Mar 15 16:35:59 darkstar kernel: ACPI: setting ELCR to 0200 (from 0ca0)
Mar 15 16:35:59 darkstar kernel: Setting up standard PCI resources
Mar 15 16:35:59 darkstar kernel: PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
Mar 15 16:35:59 darkstar kernel: Please report the result to linux-kernel to fix this permanently
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Mar 15 16:35:59 darkstar kernel: PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
Mar 15 16:35:59 darkstar kernel: PCI: Bus 7, cardbus bridge: 0000:06:07.0
Mar 15 16:35:59 darkstar kernel:   IO window: 00005400-000054ff
Mar 15 16:35:59 darkstar kernel:   IO window: 00005800-000058ff
Mar 15 16:35:59 darkstar kernel:   PREFETCH window: 88000000-89ffffff
Mar 15 16:35:59 darkstar kernel:   MEM window: 8c000000-8dffffff
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Mar 15 16:35:59 darkstar kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 15 16:35:59 darkstar kernel: TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
Mar 15 16:35:59 darkstar kernel: TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 16:35:59 darkstar kernel: highmem bounce pool size: 64 pages
Mar 15 16:35:59 darkstar kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 15 16:35:59 darkstar kernel: assign_interrupt_mode Found MSI capability
Mar 15 16:35:59 darkstar last message repeated 3 times
Mar 15 16:35:59 darkstar kernel: floppy0: no floppy controllers found
Mar 15 16:35:59 darkstar kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar 15 16:35:59 darkstar kernel: Compaq SMART2 Driver (v 2.6.0)
Mar 15 16:35:59 darkstar kernel: ide0: I/O resource 0x1F0-0x1F7 not free.
Mar 15 16:35:59 darkstar kernel: ide0: ports already in use, skipping probe
Mar 15 16:35:59 darkstar kernel: hdd: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
Mar 15 16:35:59 darkstar kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 15 16:35:59 darkstar kernel: ide-floppy driver 0.99.newide
Mar 15 16:35:59 darkstar kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Mar 15 16:35:59 darkstar kernel: scsi: <fdomain> Detection failed (no card)
Mar 15 16:35:59 darkstar kernel: Emulex LightPulse Fibre Channel SCSI driver 8.1.6
Mar 15 16:35:59 darkstar kernel: Copyright(c) 2004-2006 Emulex.  All rights reserved.
Mar 15 16:35:59 darkstar kernel: Failed initialization of WD-7000 SCSI card!
Mar 15 16:35:59 darkstar kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04 
Mar 15 16:35:59 darkstar kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Mar 15 16:35:59 darkstar kernel: 3ware Storage Controller device driver for Linux v1.26.02.001.
Mar 15 16:35:59 darkstar kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Mar 15 16:35:59 darkstar kernel: ata: 0x170 IDE port busy
Mar 15 16:35:59 darkstar kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
Mar 15 16:35:59 darkstar kernel:    pIII_sse  :  3641.000 MB/sec
Mar 15 16:35:59 darkstar kernel: raid5: using function: pIII_sse (3641.000 MB/sec)
Mar 15 16:35:59 darkstar kernel: raid6: int32x1    431 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: int32x2    442 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: int32x4    307 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: int32x8    290 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: mmxx1     1335 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: mmxx2     1482 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: sse1x1     906 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: sse1x2    1194 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: sse2x1    1666 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: sse2x2    2167 MB/s
Mar 15 16:35:59 darkstar kernel: raid6: using algorithm sse2x2 (2167 MB/s)
Mar 15 16:35:59 darkstar kernel: Using IPI Shortcut mode
Mar 15 16:35:59 darkstar kernel: ACPI wakeup devices: 
Mar 15 16:35:59 darkstar kernel: LID0 PWRB SLPB HDEF PXS1 PXS2 PXS3 GLAN MODM 
Mar 15 16:35:59 darkstar kernel: VFS: Mounted root (ext2 filesystem) readonly.
Mar 15 17:04:34 darkstar kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 15 17:04:34 darkstar kernel: Using HPET for base-timer
Mar 15 17:04:34 darkstar kernel: Using HPET for gettimeofday
Mar 15 17:04:34 darkstar kernel: Detected 1828.779 MHz processor.
Mar 15 17:04:34 darkstar kernel: Calibrating delay using timer specific routine.. 3662.30 BogoMIPS (lpj=7324615)
Mar 15 17:04:34 darkstar kernel: Mount-cache hash table entries: 512
Mar 15 17:04:34 darkstar kernel: monitor/mwait feature present.
Mar 15 17:04:34 darkstar kernel: using mwait in idle threads.
Mar 15 17:04:34 darkstar kernel: CPU: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
Mar 15 17:04:34 darkstar kernel: ACPI: setting ELCR to 0200 (from 0ca0)
Mar 15 17:04:34 darkstar kernel: Setting up standard PCI resources
Mar 15 17:04:34 darkstar kernel: PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
Mar 15 17:04:34 darkstar kernel: Please report the result to linux-kernel to fix this permanently
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Mar 15 17:04:34 darkstar kernel: PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
Mar 15 17:04:34 darkstar kernel: PCI: Bus 7, cardbus bridge: 0000:06:07.0
Mar 15 17:04:34 darkstar kernel:   IO window: 00005400-000054ff
Mar 15 17:04:34 darkstar kernel:   IO window: 00005800-000058ff
Mar 15 17:04:34 darkstar kernel:   PREFETCH window: 88000000-89ffffff
Mar 15 17:04:34 darkstar kernel:   MEM window: 8c000000-8dffffff
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Mar 15 17:04:34 darkstar kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 15 17:04:34 darkstar kernel: TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
Mar 15 17:04:34 darkstar kernel: TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 17:04:34 darkstar kernel: highmem bounce pool size: 64 pages
Mar 15 17:04:34 darkstar kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 15 17:04:34 darkstar kernel: assign_interrupt_mode Found MSI capability
Mar 15 17:04:34 darkstar last message repeated 3 times
Mar 15 17:04:34 darkstar kernel: floppy0: no floppy controllers found
Mar 15 17:04:34 darkstar kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar 15 17:04:34 darkstar kernel: Compaq SMART2 Driver (v 2.6.0)
Mar 15 17:04:34 darkstar kernel: ide0: I/O resource 0x1F0-0x1F7 not free.
Mar 15 17:04:34 darkstar kernel: ide0: ports already in use, skipping probe
Mar 15 17:04:34 darkstar kernel: hdd: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
Mar 15 17:04:34 darkstar kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 15 17:04:34 darkstar kernel: ide-floppy driver 0.99.newide
Mar 15 17:04:34 darkstar kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Mar 15 17:04:34 darkstar kernel: scsi: <fdomain> Detection failed (no card)
Mar 15 17:04:34 darkstar kernel: Emulex LightPulse Fibre Channel SCSI driver 8.1.6
Mar 15 17:04:34 darkstar kernel: Copyright(c) 2004-2006 Emulex.  All rights reserved.
Mar 15 17:04:34 darkstar kernel: Failed initialization of WD-7000 SCSI card!
Mar 15 17:04:34 darkstar kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04 
Mar 15 17:04:34 darkstar kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Mar 15 17:04:34 darkstar kernel: 3ware Storage Controller device driver for Linux v1.26.02.001.
Mar 15 17:04:34 darkstar kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Mar 15 17:04:34 darkstar kernel: ata: 0x170 IDE port busy
Mar 15 17:04:34 darkstar kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
Mar 15 17:04:34 darkstar kernel:    pIII_sse  :  3641.000 MB/sec
Mar 15 17:04:34 darkstar kernel: raid5: using function: pIII_sse (3641.000 MB/sec)
Mar 15 17:04:34 darkstar kernel: raid6: int32x1    431 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: int32x2    442 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: int32x4    307 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: int32x8    290 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: mmxx1     1335 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: mmxx2     1482 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: sse1x1     906 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: sse1x2    1194 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: sse2x1    1666 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: sse2x2    2166 MB/s
Mar 15 17:04:34 darkstar kernel: raid6: using algorithm sse2x2 (2166 MB/s)
Mar 15 17:04:34 darkstar kernel: Using IPI Shortcut mode
Mar 15 17:04:34 darkstar kernel: ACPI wakeup devices: 
Mar 15 17:04:34 darkstar kernel: LID0 PWRB SLPB HDEF PXS1 PXS2 PXS3 GLAN MODM 
Mar 15 17:04:34 darkstar kernel: VFS: Mounted root (ext2 filesystem) readonly.
Mar 15 17:04:35 darkstar kernel: firmware_class: exports duplicate symbol release_firmware (owned by kernel)
Mar 15 17:04:36 darkstar sshd[1502]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.

H_TeXMeX_H · 03-16-2007, 03:27 PM

Try disabling sshd.