Hi,
Running Slackware 12.2 I am having trouble hotsynching my Palm T|X using JPilot 1.6.1. The Palm is detected as:
Code:
usb 4-2: New USB device found, idVendor=0830, idProduct=0061
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 4-2: Product: Palm Handheld
usb 4-2: Manufacturer: Palm, Inc.
usb 4-2: SerialNumber: PN70M218V1TR
usbcore: registered new interface driver usbserial
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbserial: USB Serial support registered for Handspring Visor / Palm OS
usbserial: USB Serial support registered for Sony Clie 3.5
usbserial: USB Serial support registered for Sony Clie 5.0
visor 4-2:1.0: Handspring Visor / Palm OS converter detected
usb 4-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
usb 4-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
usbcore: registered new interface driver visor
visor: USB HandSpring Visor / Palm OS driver
In JPilot I have set the usb device as both /dev/ttyUSB1 and /dev/ttyUSB0 but when attempting to hotsync I get the following error message:
Code:
****************************************
Syncing on device /dev/ttyUSB1
Press the HotSync button now
****************************************
pi_bind error: /dev/ttyUSB1 Permission denied
Check your serial port and settings
Exiting with status SYNC_ERROR_BIND
Finished.
Permissions are set as follows:
Code:
andrew@skamandros~$ ls -l /dev/ttyUSB*
crw-rw---- 1 root uucp 188, 0 2009-01-08 22:42 /dev/ttyUSB0
crw-rw---- 1 root uucp 188, 1 2009-01-08 22:42 /dev/ttyUSB1
which I suspect may be the problem but I am a little uncertain about changing these permissions.
Any advice would be appreciated.
Andrew