belowing is my sound device message.

>> ☠ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xd4820000 irq 47

>> ☠ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1

when I tried to record a wav use:
>> ☠ $ arecord -d 3 /tmp/test-mic.wav

this wave is not record my voice. can hear nothing.

I have tried in my two laptop. can exclude microphone problem.

any one can told me about new slackware 14.1 have some sound setup wizard to run ?

Thank all for help.

What is the make and model of your computer?

This SlackDocs page may help. http://docs.slackware.com/howtos:har..._snd-hda-intel

perhaps check alsamixer.
change view with tab and press space on mic and higher it's recording level?

Yes! Good call. I always jump straight to the hardware forgetting about the mixer settings.

I have tried, But it still microphone not worked, on my 2530p and T60p laptop.

Anyone use the two laptop, and can setting micro successfully on it ?

well let me know when you run alsamixer and you press F4 to see the captured devices let us know it they are actually set.
if running kde then test it through the settings manager under multimedia.

You're lucky to have a T60. It can record from source mix in the capture device and record whats being played

Anyway just starting alsamixer and setting mic to max in playback you should hear yourself typing (and press m to start mic)
in capture it's probably mic as capture by default. If you change to mix it can record from ffmpeg for example youtube clips

Check that you actually enabled the Capture device by pressing space in alsamixer when under the Capture volume-bars. See also: alsa.opensrc.org/Record_from_mic