alright here's what's up... trying to get my mom's speedstream 5100 dsl modem working with sbc yahoo. i've been told that the modem does ppp by itself... in otherwords it's got all the stuff it needs to con nect inside the modem.... just changed the file
rc.inet1.conf
USE_DHCP[0]="yes"
...type pppoe and it should go. but when i type pppoe the 'active' light blinks and i get....
root@dog:~# pppoe
~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç~~ÿ}#À!}! } }2}!}$}%Ô}#}$À#}%}&'##·ç
then it stops... and ...nada....
tried typing...
quote:ifconfig eth0 192.168.1.64 broadcast 192.168.0.1 netmask 255.255.255.0
and
route add default gw 192.168.1.1
to get it to go... this is what got me the jibberish... not sure if i got the num bers right though.....(think it's right..lol)
here's my ifconfig and other fun things.. very lost here and new to this dsl stuff...i'm lost here...lol (p.s. computer only has slack 10 on it...start-adsl is not needed for my modem... ) any help would be welcome!!!!
root@dog:~# ifconfig
eth0 Link encap:Ethernet HWaddr xxxxxxxxxxxxxxxx
inet addr:192.168.1.64 Bcast:192.168.0.1 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:129 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7740 (7.5 Kb) TX bytes:4880 (4.7 Kb)
Interrupt:11 Base address:0xaf00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:152 errors:0 dropped:0 overruns:0 frame:0
TX packets:152 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11440 (11.1 Kb) TX bytes:11440 (11.1 Kb)
root@dog:~# dmesg
Linux version 2.4.26 (root@tree) (gcc version 3.3.4) #6 Mon Jun 14 19:07:27 PDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bbf0000 (usable)
BIOS-e820: 000000000bbf0000 - 000000000bbf8000 (ACPI data)
BIOS-e820: 000000000bbf8000 - 000000000bc00000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
187MB LOWMEM available.
On node 0 totalpages: 48112
zone(0): 4096 pages.
zone(1): 44016 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 450.016 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 897.84 BogoMIPS
Memory: 187124k/192448k available (1844k kernel code, 4936k reserved, 618k data, 120k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS5595 [1039/0008] at 00:01.0
PCI: Cannot allocate resource region 9 of bridge 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS530 ATA 66 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda
MA, hdb
MA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc
MA, hdd
MA
hda: Maxtor 91531U3, ATA DISK drive
blk: queue c03b3360, I/O limit 4095Mb (mask 0xffffffff)
hdd: FX4820T, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 30015216 sectors (15368 MB) w/512KiB Cache, CHS=1868/255/63, UDMA(33)
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 554.800 MB/sec
32regs : 381.200 MB/sec
pII_mmx : 767.600 MB/sec
p5_mmx : 708.800 MB/sec
raid5: using function: pII_mmx (767.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 145M
agpgart: Detected SiS 530 chipset
agpgart: AGP aperture is 64M @ 0xec000000
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:0a.0
eth0: RealTek RTL8139 at 0xcc83af00, 00:40:05:09:c9:11, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
PCI: Found IRQ 9 for device 00:0c.0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xcc898000, IRQ 10
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:01.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x43d/0x6d) is not claimed by any active driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 17:55:05 Jun 13 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x006D
printer.c: v0.13: USB Printer Device Class driver
UMSDOS 0.86k (compatibility level 0.4, fast msdos)
floppy0: data CRC error: track 1, head 0, sector 14, size 2
floppy0: data CRC error: track 1, head 0, sector 14, size 2
end_request: I/O error, dev 02:00 (floppy), sector 49
UMSDOS 0.86k (compatibility level 0.4, fast msdos)
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
root@dog:~#
root@dog:~# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems [SiS] 530 Host (rev 2).
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xec000000 [0xefffffff].
Bus 0, device 0, function 1:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
Master Capable. Latency=16.
I/O at 0xffa0 [0xffaf].
Bus 0, device 1, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 177).
Bus 0, device 1, function 1:
Class ff00: Silicon Integrated Systems [SiS] ACPI (rev 0).
Bus 0, device 1, function 2:
USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 17).
IRQ 10.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xebfff000 [0xebffffff].
Bus 0, device 2, function 0:
PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP) (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 10, function 0:
Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 16).
IRQ 11.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xde00 [0xdeff].
Non-prefetchable 32 bit memory at 0xebffef00 [0xebffefff].
Bus 0, device 12, function 0:
Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev 1).
IRQ 9.
Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
I/O at 0xdc00 [0xdc3f].
I/O at 0xda00 [0xda0f].
I/O at 0xd800 [0xd80f].
I/O at 0xd600 [0xd603].
I/O at 0xd400 [0xd403].
Bus 1, device 0, function 0:
VGA compatible controller: Silicon Integrated Systems [SiS] SiS530 3D PCI/AGP (rev 162).
Master Capable. Latency=32. Min Gnt=2.
Prefetchable 32 bit memory at 0xff000000 [0xff7fffff].
Non-prefetchable 32 bit memory at 0xe7ef0000 [0xe7efffff].
I/O at 0xbc00 [0xbc7f].
root@dog:~#
pinging linuxforum.org doesn't work
