Hi,
I'm having problems connecting to my wireless network. I'm using SUSE 10.0 on a Vaio VGN-A517M laptop.
Some potentially useful information:
Code:
pieterp:/home/pieter # ifconfig
eth0 Link encap:Ethernet HWaddr 00:01:4A:BF:26:50
inet addr:192.168.0.131 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::201:4aff:febf:2650/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3409 errors:0 dropped:0 overruns:0 frame:0
TX packets:3776 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1957187 (1.8 Mb) TX bytes:605441 (591.2 Kb)
Interrupt:5 Base address:0x2400
eth1 Link encap:Ethernet HWaddr 00:13:CE:44:49:7F
inet6 addr: fe80::213:ceff:fe44:497f/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:265 errors:113 dropped:115 overruns:0 frame:0
TX packets:22 errors:0 dropped:17 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:54661 (53.3 Kb) TX bytes:16316 (15.9 Kb)
Interrupt:4 Base address:0x8000 Memory:feafd000-feafdfff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2177 errors:0 dropped:0 overruns:0 frame:0
TX packets:2177 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:94690 (92.4 Kb) TX bytes:94690 (92.4 Kb)
Code:
pieterp:/home/pieter # iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11g ESSID:"Rijkeklaren 20"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1B:11:85:23:F2
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry limit:7 RTS thr:off Fragment thr:off
Encryption key:BBBB-BBBB-BB [2] Security mode:open
Power Management:off
Link Quality=97/100 Signal level=-27 dBm Noise level=-86 dBm
Rx invalid nwid:0 Rx invalid crypt:113 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:2 Missed beacon:0
Code:
pieterp:/home/pieter # lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon Mobility X600]
02:01.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
02:01.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
02:01.3 Unknown mass storage controller: Texas Instruments PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. an
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Code:
pieterp:/home/pieter # iwlist eth1 scan
eth1 Scan completed :
Cell 01 - Address: 00:11:24:28:80:C7
ESSID:"<hidden>"
Protocol:IEEE 802.11bg
Mode:Master
Channel:1
Encryption key:on
Bit Rate:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54
Quality=64/100 Signal level=-62 dBm
Extra:wpa_ie=dd180050f20101000050f20201000050f20201000050f2020000
Extra:rsn_ie=30180100000fac020200000fac04000fac020100000fac020000
Extra: Last beacon: 180ms ago
Cell 02 - Address: 00:17:9A:69:6E:D9
ESSID:"bij ons"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:on
Bit Rate:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54
Quality=91/100 Signal level=-38 dBm
Extra:wpa_ie=dd160050f20101000050f20201000050f20201000050f202
Extra:rsn_ie=30180100000fac020200000fac02000fac040100000fac020000
Extra: Last beacon: 80ms ago
Cell 03 - Address: 00:1B:11:85:23:F2
ESSID:"Rijkeklaren 20"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:on
Bit Rate:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54
Quality=70/100 Signal level=-58 dBm
Extra: Last beacon: 164ms ago
Cell 04 - Address: 00:1A:2A:B3:B9:D9
ESSID:"WiFi_D9"
Protocol:IEEE 802.11bg
Mode:Master
Channel:9
Encryption key:off
Bit Rate:54 Mb/s
Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 22 24 36 48 54
Quality=70/100 Signal level=-58 dBm
Extra: Last beacon: 60ms ago
My ESSID is Rijkeklaren 20. The 64 bit hex WEP key is "BBBBBBBBBB" (hope the neighbours aren't watching), so I entered this in YaST and selected "hexadecimal".
Any thoughts?
Thanks
