Distro - slackware 10.0
kernel - 2.4.26
pci wireless adapter - Belkin F5D6001 version 3
chipset - Realtek (as far as I known)
I compiled with Realtek driver (already updated pci id which is 1799 : 6001)
%%%%%%%%%%%%%%%%%%
//----------------------------------------------------------------------------------------
// PCI Device_ID table
//----------------------------------------------------------------------------------------
static struct pci_device_id rtl8180_pci_id_tbl[] = {
//{ 0x10EC, 0x8180 /*0x8139*/, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0x1799, 0x6001 /*0x8139*/, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{0,},
};
%%%%%%%%%%%%%%%%%%
Still doesn't work!
%%%%%%%%%%%%%%%%
lspci gave me this
%%%%%%%%%%%%%%%
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host
Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0c.0 Ethernet controller: Belkin: Unknown device 6001 (rev 20)
00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
(rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
(rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
(rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD
[Radeon 7200]
%%%%%%%%%%%%%%%%%%%%%
lspci -n gave me this
%%%%%%%%%%%%%%%%%%%%
00:00.0 Class 0600: 1106:3189
00:01.0 Class 0604: 1106:b168
00:0c.0 Class 0200: 1799:6001 (rev 20)
00:10.0 Class 0c03: 1106:3038 (rev 80)
00:10.1 Class 0c03: 1106:3038 (rev 80)
00:10.2 Class 0c03: 1106:3038 (rev 80)
00:10.3 Class 0c03: 1106:3104 (rev 82)
00:11.0 Class 0601: 1106:3177
00:11.1 Class 0101: 1106:0571 (rev 06)
00:11.5 Class 0401: 1106:3059 (rev 50)
00:12.0 Class 0200: 1106:3065 (rev 74)
01:00.0 Class 0300: 1002:5144
%%%%%%%%%%%%%%%%%%%%%%%%%%%%
lsmod gave me this (still initializing)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Module Size Used by Not tainted
snd-pcm-oss 37736 0 (unused)
snd-mixer-oss 12504 0 [snd-pcm-oss]
usb-storage 66176 1
rtl8180_24x 235404 1 (initializing)
uhci 24444 0 (unused)
ehci-hcd 17580 0 (unused)
usbcore 59308 1 [usb-storage uhci ehci-hcd]
snd-via82xx 13124 1
gameport 1420 0 [snd-via82xx]
snd-pcm 56072 1 [snd-pcm-oss snd-via82xx]
snd-timer 13604 0 [snd-pcm]
snd-ac97-codec 49500 0 [snd-via82xx]
snd-page-alloc 6328 0 [snd-via82xx snd-pcm]
snd-mpu401-uart 3200 0 [snd-via82xx]
snd-rawmidi 12740 0 [snd-mpu401-uart]
snd-seq-device 3888 0 [snd-rawmidi]
snd 30852 0 [snd-pcm-oss snd-mixer-oss snd-via82xx
snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 3396 4 [snd]
via-rhine 12464 1
mii 2272 0 [via-rhine]
crc32 2880 0 [via-rhine]
pcmcia_core 39972 0
ide-scsi 9328 0
agpgart 43940 0 (unused)
%%%%%%%%%%%%%%%%%%%%%%%%%
dmesg gave me this and it shows driver loded
%%%%%%%%%%%%%%%%%%%%%%%%%%
******** RTL8180 Wireless Lan Driver 2003-11-24 loaded********
PCI: Found IRQ 10 for device 00:0c.0
RTL8180: 00:0c.0: region #0 IS a PIO resource!
RTL8180: request_region(0x0000b800,0x00000100) !
Unable to handle kernel paging request at virtual address 000e0109
printing eip:
e0b55d50
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<e0b55d50>] Not tainted
EFLAGS: 00010216
eax: dcd00000 ebx: dcd00000 ecx: 00000000 edx: 00000000
esi: dd0ff800 edi: 000e0001 ebp: de2e3e7c esp: de2e3e54
ds: 0018 es: 0018 ss: 0018
Process modprobe.old (pid: 265, stackpage=de2e3000)
Stack: dcd00000 00000000 0001b0ac ffffffff 00000282 00000001 00000282
dd0ff800
0000b800 dd0ffa27 de2e3e9c e0b54930 dd0ff800 c011cb47
dffef85c de0ae4c0
dd0ff800 dd0ff800 de2e3ecc e0b54272 dd0ff800 0000b800 00000100
e0b8b9c0
Call Trace: [<e0b54930>] [<c011cb47>] [<e0b54272>] [<e0b8b9c0>]
[<e0b8b9e0>]
[<e0b8ba20>] [<c02362e1>] [<e0b8b9e0>] [<e0b8ba20>] [<c0236377>]
[<e0b8ba20>]
[<e0b544bc>] [<e0b8ba20>] [<c0118e10>] [<e0b54060>] [<c0108d73>]
Code: 89 9f 08 01 00 00 89 da 81 c3 ec 93 01 00 89 1a
81 c3 04 03
%%%%%%%%%%%%%%%%%%%%%%%%%
when I did ./wlanup it shows this and the konsole stuck there
%%%%%%%%%%%%%%%%%%%%%%%%%
./wlanup infra
insmod: a module named rtl8180_24x already exists
infra
wlan0 no private ioctls.
wlan0 no private ioctls.
wlan0 no private ioctls.
wlan0 no private ioctls.
wlan0 no private ioctls.
wlan0 no private ioctls.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Any idea anyone??
Thanks!
Please do not refer to another thread in this forum, because I already tried those steps in other threads and still doesn't work.
bbo
