Belkin F5D6001 ver.3 driver problem in slackware 10.0
Distro - slackware 10.0
kernel - 2.4.26 pci wireless adapter - Belkin F5D6001 version 3 chipset - Realtek (as far as I known) I compiled with Realtek driver (already updated pci id which is 1799 : 6001) %%%%%%%%%%%%%%%%%% //---------------------------------------------------------------------------------------- // PCI Device_ID table //---------------------------------------------------------------------------------------- static struct pci_device_id rtl8180_pci_id_tbl[] = { //{ 0x10EC, 0x8180 /*0x8139*/, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1799, 0x6001 /*0x8139*/, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, {0,}, }; %%%%%%%%%%%%%%%%%% Still doesn't work! :( %%%%%%%%%%%%%%%% lspci gave me this %%%%%%%%%%%%%%% 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge 00:0c.0 Ethernet controller: Belkin: Unknown device 6001 (rev 20) 00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon 7200] %%%%%%%%%%%%%%%%%%%%% lspci -n gave me this %%%%%%%%%%%%%%%%%%%% 00:00.0 Class 0600: 1106:3189 00:01.0 Class 0604: 1106:b168 00:0c.0 Class 0200: 1799:6001 (rev 20) 00:10.0 Class 0c03: 1106:3038 (rev 80) 00:10.1 Class 0c03: 1106:3038 (rev 80) 00:10.2 Class 0c03: 1106:3038 (rev 80) 00:10.3 Class 0c03: 1106:3104 (rev 82) 00:11.0 Class 0601: 1106:3177 00:11.1 Class 0101: 1106:0571 (rev 06) 00:11.5 Class 0401: 1106:3059 (rev 50) 00:12.0 Class 0200: 1106:3065 (rev 74) 01:00.0 Class 0300: 1002:5144 %%%%%%%%%%%%%%%%%%%%%%%%%%%% lsmod gave me this (still initializing) %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Module Size Used by Not tainted snd-pcm-oss 37736 0 (unused) snd-mixer-oss 12504 0 [snd-pcm-oss] usb-storage 66176 1 rtl8180_24x 235404 1 (initializing) uhci 24444 0 (unused) ehci-hcd 17580 0 (unused) usbcore 59308 1 [usb-storage uhci ehci-hcd] snd-via82xx 13124 1 gameport 1420 0 [snd-via82xx] snd-pcm 56072 1 [snd-pcm-oss snd-via82xx] snd-timer 13604 0 [snd-pcm] snd-ac97-codec 49500 0 [snd-via82xx] snd-page-alloc 6328 0 [snd-via82xx snd-pcm] snd-mpu401-uart 3200 0 [snd-via82xx] snd-rawmidi 12740 0 [snd-mpu401-uart] snd-seq-device 3888 0 [snd-rawmidi] snd 30852 0 [snd-pcm-oss snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3396 4 [snd] via-rhine 12464 1 mii 2272 0 [via-rhine] crc32 2880 0 [via-rhine] pcmcia_core 39972 0 ide-scsi 9328 0 agpgart 43940 0 (unused) %%%%%%%%%%%%%%%%%%%%%%%%% dmesg gave me this and it shows driver loded %%%%%%%%%%%%%%%%%%%%%%%%%% ******** RTL8180 Wireless Lan Driver 2003-11-24 loaded******** PCI: Found IRQ 10 for device 00:0c.0 RTL8180: 00:0c.0: region #0 IS a PIO resource! RTL8180: request_region(0x0000b800,0x00000100) ! Unable to handle kernel paging request at virtual address 000e0109 printing eip: e0b55d50 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[<e0b55d50>] Not tainted EFLAGS: 00010216 eax: dcd00000 ebx: dcd00000 ecx: 00000000 edx: 00000000 esi: dd0ff800 edi: 000e0001 ebp: de2e3e7c esp: de2e3e54 ds: 0018 es: 0018 ss: 0018 Process modprobe.old (pid: 265, stackpage=de2e3000) Stack: dcd00000 00000000 0001b0ac ffffffff 00000282 00000001 00000282 dd0ff800 0000b800 dd0ffa27 de2e3e9c e0b54930 dd0ff800 c011cb47 dffef85c de0ae4c0 dd0ff800 dd0ff800 de2e3ecc e0b54272 dd0ff800 0000b800 00000100 e0b8b9c0 Call Trace: [<e0b54930>] [<c011cb47>] [<e0b54272>] [<e0b8b9c0>] [<e0b8b9e0>] [<e0b8ba20>] [<c02362e1>] [<e0b8b9e0>] [<e0b8ba20>] [<c0236377>] [<e0b8ba20>] [<e0b544bc>] [<e0b8ba20>] [<c0118e10>] [<e0b54060>] [<c0108d73>] Code: 89 9f 08 01 00 00 89 da 81 c3 ec 93 01 00 89 1a 81 c3 04 03 %%%%%%%%%%%%%%%%%%%%%%%%% when I did ./wlanup it shows this and the konsole stuck there %%%%%%%%%%%%%%%%%%%%%%%%% ./wlanup infra insmod: a module named rtl8180_24x already exists infra wlan0 no private ioctls. wlan0 no private ioctls. wlan0 no private ioctls. wlan0 no private ioctls. wlan0 no private ioctls. wlan0 no private ioctls. %%%%%%%%%%%%%%%%%%%%%%%%%%%% Any idea anyone?? Thanks! Please do not refer to another thread in this forum, because I already tried those steps in other threads and still doesn't work. bbo :Pengy: |
Finally, my f5d6001 ver.3 PCI wireless card is working under slackware 10.0 using ndiswrapper. \0/
bbo |
Hey bbo,
Can you post a HCL entry for this card on this site as there are entries for version 1 and 2 but not 3. That's be great for future users of the same card as you have. Regards Chris |
already did!
cheers! |
All times are GMT -5. The time now is 08:03 AM. |