Running K3b in a clean install of SuSE 9.1 , I can burn data cd's fine. However, audio cd's will not burn. Here is my debug out put and a copy of fstab.
System ---SORRY FOR THE LONG DEBUG MESSAGE---
-----------------------
K3b Version: 0.11.7
KDE Version: 3.2.1
QT Version: 3.3.1
cdrecord
-----------------------
ZY‡ $Â
: Operation not permitted. WARNING: Cannot set RR-scheduler
ZY‡ $Â
: Permission denied. WARNING: Cannot set priority using setpriority().
ZY‡ $Â
: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: No such file or directory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.80-resmgr-patch '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : ' '
Identifikation : 'DVD+RW RW5125 '
Revision : '1.27'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x001B
Profile: 0x001A
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1310720 = 1280 KB
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: audio 24 MB (02:24.69) no preemp swab copy
Track 02: audio 110 MB (10:59.58) no preemp swab copy
Track 03: audio 35 MB (03:32.00) no preemp swab copy
Track 04: audio 29 MB (02:55.82) no preemp swab copy
Track 05: audio 69 MB (06:53.18) no preemp swab copy
Total size: 270 MB (26:45.29) = 120397 sectors
Lout start: 270 MB (26:47/22) = 120397 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 7
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, high Beta category (C+) (7)
ATIP start of lead in: -11689 (97:26/11)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 19
Manufacturer: POSTECH Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 239451
Starting to write CD/DVD at speed 12.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
/usr/bin/cdrecord: Success. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0C 00 00 00 00 90 82 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x90 Qual 0x82 (vendor unique sense code 0x90) [No matching qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s
/usr/bin/cdrecord: OPC failed.
Writing time: 3.069s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
BURN-Free was never needed.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc -dao driveropts=burnfree -eject -useinfo -pad -shorttrack -audio /tmp/kde-miked/k3b_audio_0_01.inf /tmp/kde-miked/k3b_audio_0_02.inf /tmp/kde-miked/k3b_audio_0_03.inf /tmp/kde-miked/k3b_audio_0_04.inf /tmp/kde-miked/k3b_audio_0_05.inf
------------------------fstab----------------------------
/dev/hda11 / reiserfs acl,user_xattr 1 1
/dev/hda1 /data1 auto noauto,user 0 0
/dev/hda6 /data2 auto noauto,user 0 0
/dev/hda8 /data3 auto noauto,user 0 0
/dev/hda9 /data4 auto noauto,user 0 0
/dev/hda10 /data5 auto noauto,user 0 0
/dev/hdb2 /data6 auto noauto,user 0 0
/dev/hda5 /windows/C vfat users,gid=users,umask=0002,iocharset=utf8 0 0
/dev/hda7 swap swap pri=42 0 0
/dev/hdb1 swap swap pri=42 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
sysfs /sys sysfs noauto 0 0
/dev/cdrecorder /media/cdrecorder iso9660 noauto,user,ro 0 0
~
Any advice would be great!
Mike
