How to make gnome support 1024x768?

jon_k · 12-31-2004, 10:43 PM

Windows supports up to 1600x1024, yet gnome-display-properties only shows up to 1024x768.

XFREE config shows the following; any ideas on how to fix this and get screen res larger?

Section "Monitor"
Identifier "Monitor0"
VendorName "unknown"
ModelName "unknown"
#Option "DPMS" "true"
HorizSync 30.0 - 82.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 70.0 # Very conservative. May flicker.
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
EndSection

trickykid · 12-31-2004, 11:29 PM

Well, what type of video card do you have and what is it configured as?

And what type of monitor is it and are those the correct horizontal and verticle refresh rates for your monitor?

I doubt those are correct though, usually vertical refresh rates range from 50 to 180.. not just 50 - 70.. etc, etc.

More and better details get better replies and answers.

srichand · 01-01-2005, 02:29 AM

You mentioned an nVidia GeForce card. Do you have the latest driver from nVidia? If not, download it from http://www.nvidia.com/linux.

Hope that helps

Srichand