Seagreen,
Usually 127.0.0.* are reserved for localhost ip addresses. Try taking out all occurences of 127.0.0.2 and replacing them with the ip address of the 2nd machine where the ip is the network ip and not the localhost ip. On the 2nd machine do an
Code:
ifconfig <interface>
where <interface> is usually eth0, eth1, etc. It'll spit out some stuff like:
Code:
eth0 Link encap:Ethernet HWaddr 00:13:D4:04:43:DA
inet addr:192.168.0.199 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:166298 errors:0 dropped:0 overruns:0 frame:0
TX packets:162826 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:75086194 (71.6 Mb) TX bytes:18744718 (17.8 Mb)
Interrupt:3
Check for the line that starts w/ inet addr. This'll be the network ip for the machine; in my case it's 192.168.0.199. So, replace all occurences on ur cups machine where you have 127.0.0.2 with your inet addr of your 2nd machine. Then, I'd take out the @LOCAL for it doesn't seem to be serving a purpose. Also, if changing the 127.0.0.2 to your inet addr doesn't work try removing the line altogether to see if you can get it started just for localhost. Once we have that working then we can move on to the rest of the network. Let me know how it goes and good luck!