Thanks to all for the answer, you are help me to find the problem.
I have to say this, the simple way to install nvidia driver is to install the binary file NVIDIA 340.101.run .
This file is the newer one updated recently (2016.12.14)
I say this is the better mode cause that script does everything infact i verify that the driver is installed:
/etc/modprobe.d/nvidia-installer-disable-nouveau.conf
Code:
# generated by nvidia-installer
blacklist nouveau
options nouveau modeset=0
/etc/X11/Xorg.conf
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
/var/log/Xorg.0.log
Code:
[ 87.546]
X.Org X Server 1.18.3
Release Date: 2016-04-04
...
[ 87.709] (II) LoadModule: "glx"
[ 87.746] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 87.953] (II) Module glx: vendor="NVIDIA Corporation"
[ 87.953] compiled for 4.0.2, module version = 1.0.0
[ 87.953] Module class: X.Org Server Extension
[ 87.966] (II) NVIDIA GLX Module 340.101 Thu Dec 1 15:12:41 PST 2016
[ 87.966] (II) LoadModule: "nvidia"
[ 87.966] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 88.054] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 88.054] compiled for 4.0.2, module version = 1.0.0
[ 88.054] Module class: X.Org Video Driver
[ 88.057] (II) NVIDIA dlloader X Driver 340.101 Thu Dec 1 14:50:13 PST 2016
[ 88.057] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 88.058] (--) using VT number 7
...
[ 88.100] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 88.100] (==) NVIDIA(0): RGB weight 888
[ 88.100] (==) NVIDIA(0): Default visual is TrueColor
[ 88.100] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 88.101] (**) NVIDIA(0): Enabling 2D acceleration
[ 88.899] (II) NVIDIA(0): Display (HP w2448h (CRT-1)) does not support NVIDIA 3D Vision
[ 88.899] (II) NVIDIA(0): stereo.
[ 88.899] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 88.901] (II) NVIDIA(0): NVIDIA GPU GeForce 9800 GT (G92) at PCI:1:0:0 (GPU-0)
[ 88.901] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 88.901] (--) NVIDIA(0): VideoBIOS: 62.92.56.00.3c
[ 88.901] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 88.904] (--) NVIDIA(0): Valid display device(s) on GeForce 9800 GT at PCI:1:0:0
[ 88.904] (--) NVIDIA(0): CRT-0
[ 88.904] (--) NVIDIA(0): HP w2448h (CRT-1) (boot, connected)
[ 88.904] (--) NVIDIA(0): DFP-0
[ 88.904] (--) NVIDIA(0): DFP-1
[ 88.904] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 88.904] (--) NVIDIA(GPU-0): HP w2448h (CRT-1): 400.0 MHz maximum pixel clock
[ 88.904] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 88.904] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 88.904] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 88.904] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 88.904] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 88.904] (**) NVIDIA(0): device HP w2448h (CRT-1) (Using EDID frequencies has been
[ 88.904] (**) NVIDIA(0): enabled on all display devices.)
[ 88.907] (==) NVIDIA(0):
[ 88.907] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 88.907] (==) NVIDIA(0): will be used as the requested mode.
[ 88.907] (==) NVIDIA(0):
[ 88.907] (II) NVIDIA(0): Validated MetaModes:
[ 88.907] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 88.907] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
[ 88.973] (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
[ 88.973] (--) NVIDIA(0): option
[ 88.974] (--) Depth 24 pixmap format is 32 bpp
[ 88.974] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 88.981] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 89.092] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 89.092] (==) NVIDIA(0): Backing store enabled
[ 89.092] (==) NVIDIA(0): Silken mouse enabled
[ 89.094] (**) NVIDIA(0): DPMS enabled
[ 89.094] (II) Loading sub module "dri2"
[ 89.094] (II) LoadModule: "dri2"
[ 89.094] (II) Module "dri2" already built-in
[ 89.094] (II) NVIDIA(0): [DRI2] Setup complete
[ 89.094] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 89.094] (--) RandR disabled
[ 89.096] (II) Initializing extension GLX
[ 89.096] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event2)
...
[ 98.829] (II) NVIDIA(GPU-0): Display (HP w2448h (CRT-1)) does not support NVIDIA 3D Vision
[ 98.830] (II) NVIDIA(GPU-0): stereo.
[ 102.132] (II) NVIDIA(GPU-0): Display (HP w2448h (CRT-1)) does not support NVIDIA 3D Vision
[ 102.132] (II) NVIDIA(GPU-0): stereo.
[ 120.423] (II) NVIDIA(GPU-0): Display (HP w2448h (CRT-1)) does not support NVIDIA 3D Vision
[ 120.423] (II) NVIDIA(GPU-0): stereo.
I have some doubt here
/var/log/syslog
Code:
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: RSDP 0x00000000000F7760 000014 (v00 Nvidia)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: RSDT 0x000000003FFF3040 000034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: FACP 0x000000003FFF30C0 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: DSDT 0x000000003FFF3180 006678 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: FACS 0x000000003FFF0000 000040
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: SRAT 0x000000003FFF9900 000090 (v01 AMD HAMMER 00000001 AMD 00000001)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: MCFG 0x000000003FFF9A00 00003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: APIC 0x000000003FFF9840 00007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.000000] ACPI: BIOS IRQ0 override ignored.
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.008533] ACPI: 1 ACPI AML tables successfully acquired and loaded
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.183433] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.230281] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.292319] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.302265] OCFS2 User DLM kernel interface loaded
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.340662] scsi: <fdomain> Detection failed (no card)
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.340726] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.340797] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0.
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.340836] Copyright(c) 2004-2015 Emulex. All rights reserved.
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.344704] GDT-HA: Storage RAID Controller Driver. Version: 3.05
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.345880] 3ware Storage Controller device driver for Linux v1.26.02.003.
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.347080] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.354946] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.361685] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
Dec 22 11:33:50 MyMediaCenter kernel: [ 0.660861] microcode: AMD CPU family 0xf not supported
Dec 22 11:33:50 MyMediaCenter kernel: [ 4.159792] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
Dec 22 11:33:50 MyMediaCenter kernel: [ 6.601579] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
Dec 22 11:33:50 MyMediaCenter kernel: [ 7.005330] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Dec 22 11:33:50 MyMediaCenter kernel: [ 7.343968] powernow_k8: [Firmware Bug]: No PSB or ACPI _PSS objects
Dec 22 11:33:50 MyMediaCenter kernel: [ 7.345122] powernow_k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
Dec 22 11:33:50 MyMediaCenter kernel: [ 7.699155] nvidia: module license 'NVIDIA' taints kernel.
Dec 22 11:33:50 MyMediaCenter kernel: [ 7.700380] Disabling lock debugging due to kernel taint
Dec 22 11:33:50 MyMediaCenter kernel: [ 7.811382] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Dec 22 11:33:50 MyMediaCenter kernel: [ 7.822541] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.101 Thu Dec 1 15:52:31 PST 2016
Dec 22 11:35:04 MyMediaCenter kernel: [ 88.788684] NVRM: Your system is not currently configured to drive a VGA console
Dec 22 11:35:04 MyMediaCenter kernel: [ 88.788691] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
Dec 22 11:35:04 MyMediaCenter kernel: [ 88.788694] NVRM: requires the use of a text-mode VGA console. Use of other console
Dec 22 11:35:04 MyMediaCenter kernel: [ 88.788695] NVRM: drivers including, but not limited to, vesafb, may result in
Dec 22 11:35:04 MyMediaCenter kernel: [ 88.788697] NVRM: corruption and stability problems, and is not supported.
Dec 22 11:35:05 MyMediaCenter console-kit-daemon[950]: WARNING: Failed to let cgmanager know that it can remove the cgroup when it's empty, the error was: invalid request
Dec 22 11:35:18 MyMediaCenter org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Dec 22 11:35:33 MyMediaCenter pulseaudio[1259]: [pulseaudio] pid.c: Stale PID file, overwriting.
Dec 22 11:35:34 MyMediaCenter pulseaudio[1259]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Dec 22 11:35:34 MyMediaCenter pulseaudio[1259]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Dec 22 11:35:34 MyMediaCenter pulseaudio[1259]: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
Dec 22 11:35:34 MyMediaCenter pulseaudio[1259]: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="1" name="1" card_name="alsa_card.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed.
Dec 22 11:35:34 MyMediaCenter pulseaudio[1259]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
Dec 22 11:35:34 MyMediaCenter pulseaudio[1269]: [pulseaudio] pid.c: Daemon already running.
Dec 22 11:35:41 MyMediaCenter hp-systray: hp-systray[1275]: warning: hp-systray should not be run as root/superuser.
Dec 22 11:35:41 MyMediaCenter hp-systray: hp-systray[1275]: error: hp-systray cannot be run as root. Exiting.
I have some doubts in this file, but i think driver nvidia is installed.
But I have notice this When i start Xwindows (kde) everything is ok , i can see video, music, photo and everything is ok
But when i open a browser (firefox o konqueror) and go on internet, everything begins slowly and my sata driver begins to works uninterruptedly.
I type a command smartctl -a
Code:
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.14] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD1600AAJS-00PSA0
Serial Number: WD-WMAP91255565
LU WWN Device Id: 5 0014ee 05563c09d
Firmware Version: 05.06H05
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Dec 22 12:54:37 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 56) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 7
3 Spin_Up_Time 0x0003 160 157 021 Pre-fail Always - 2991
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5589
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 9632
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4258
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 57
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 5615
194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 32
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 178 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 178 occurred at disk power-on lifetime: 9588 hours (399 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 40 57 d2 e0 Error: UNC at LBA = 0x00d25740 = 13784896
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 40 57 d2 0a 00 00:02:10.147 READ DMA EXT
25 00 00 40 56 d2 0a 00 00:02:10.145 READ DMA EXT
25 00 00 40 55 d2 0a 00 00:02:10.143 READ DMA EXT
25 00 00 40 54 d2 0a 00 00:02:10.141 READ DMA EXT
25 00 00 40 53 d2 0a 00 00:02:10.139 READ DMA EXT
Error 177 occurred at disk power-on lifetime: 3099 hours (129 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 38 89 e7 e0 Error: UNC at LBA = 0x00e78938 = 15173944
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d8 00 38 89 e7 02 00 00:18:45.948 READ DMA EXT
25 d8 00 38 88 e7 02 00 00:18:45.946 READ DMA EXT
25 d8 00 38 87 e7 02 00 00:18:45.945 READ DMA EXT
25 d8 00 38 86 e7 02 00 00:18:45.943 READ DMA EXT
25 d8 00 38 85 e7 02 00 00:18:45.942 READ DMA EXT
Error 176 occurred at disk power-on lifetime: 2768 hours (115 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 33 b4 e7 e0 Error: UNC at LBA = 0x00e7b433 = 15184947
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 01 33 b4 e7 02 00 02:29:09.192 READ VERIFY SECTOR(S) EXT
25 00 01 00 00 00 00 00 02:29:09.192 READ DMA EXT
42 00 02 35 b4 e7 02 00 02:29:09.182 READ VERIFY SECTOR(S) EXT
25 00 01 00 00 00 00 00 02:29:09.182 READ DMA EXT
42 00 02 33 b4 e7 02 00 02:29:06.410 READ VERIFY SECTOR(S) EXT
Error 175 occurred at disk power-on lifetime: 2768 hours (115 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 33 b4 e7 e0 Error: UNC at LBA = 0x00e7b433 = 15184947
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 02 33 b4 e7 02 00 02:29:06.410 READ VERIFY SECTOR(S) EXT
25 00 01 00 00 00 00 00 02:29:06.410 READ DMA EXT
42 00 04 33 b4 e7 02 00 02:29:03.631 READ VERIFY SECTOR(S) EXT
42 00 04 2f b4 e7 02 00 02:29:03.631 READ VERIFY SECTOR(S) EXT
42 00 08 37 b4 e7 02 00 02:29:03.620 READ VERIFY SECTOR(S) EXT
Error 174 occurred at disk power-on lifetime: 2768 hours (115 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 33 b4 e7 e0 Error: UNC at LBA = 0x00e7b433 = 15184947
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 04 33 b4 e7 02 00 02:29:03.631 READ VERIFY SECTOR(S) EXT
42 00 04 2f b4 e7 02 00 02:29:03.631 READ VERIFY SECTOR(S) EXT
42 00 08 37 b4 e7 02 00 02:29:03.620 READ VERIFY SECTOR(S) EXT
25 00 01 66 79 1a 06 00 02:29:03.620 READ DMA EXT
42 00 08 2f b4 e7 02 00 02:29:00.982 READ VERIFY SECTOR(S) EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 9625 -
# 2 Short offline Completed without error 00% 9624 -
# 3 Short offline Completed without error 00% 9624 -
# 4 Short offline Completed without error 00% 9624 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
So tell me what do you think buddies
