Linux - NewbieThis Linux forum is for members that are new to Linux.
Just starting out and have a question?
If it is not in the man pages or the how-to's this is the place!
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Introduction to Linux - A Hands on Guide
This guide was created as an overview of the Linux Operating System, geared toward new users as an exploration tour and getting started guide, with exercises at the end of each chapter.
For more advanced trainees it can be a desktop reference, and a collection of the base knowledge needed to proceed with system and network administration. This book contains many real life examples derived from the author's experience as a Linux system and network administrator, trainer and consultant. They hope these examples will help you to get a better understanding of the Linux system and that you feel encouraged to try out things on your own.
Click Here to receive this Complete Guide absolutely free.
i am running a gateway with red hat linux 9.0 and i want to configure mrtg in that gateway i did following but there is some problem they are following:
Installing the SNMP
# cd /etc/snmp
# mv snmpd.conf snmpd.conf.old
# vi snmpd.conf [new file]
rocommunity ropublic [any string]
or
#echo “rocommunity ropublic”>/etc/snmp/snmp.conf
# chkconfig snmpd on
# /etc/rc.d/init.d/snmpd start
# snmpwalk –v 1 –c ropublic localhost system (when I quering this the output is :Timeout:no response from localhost)
# snmpwalk –v 1 –c ropublic localhost interface(when I quering this the output is :Timeout:no response from localhost)
# rpm –ivh mrtg-2.10…………rpm [RH 9.0 Disk 02]
# vi /etc/sysconfig/i18n
Replace LANG=”en_US.UTF_8”
with LANG=”en_US”
# init 6
Making Configuration File:
# cfgmaker - -output=/etc/mrtg/shahin.cfg - - global “workdir: /var/www/html/traffic” - - global ‘options[ _ ]: growright, bits’ ropublic@localhost (when I quering this the output is :no file created)
please help me i don't know what to do...???i am novice please reply me in detail.......
i am running a gateway with red hat linux 9.0 and i want to configure mrtg in that gateway i did following but there is some problem they are following:
Installing the SNMP
# cd /etc/snmp
# mv snmpd.conf snmpd.conf.old
# vi snmpd.conf [new file]
rocommunity ropublic [any string]
or
#echo “rocommunity ropublic”>/etc/snmp/snmp.conf
# chkconfig snmpd on
# /etc/rc.d/init.d/snmpd start
# snmpwalk –v 1 –c ropublic localhost system (when I quering this the output is :Timeout:no response from localhost)
# snmpwalk –v 1 –c ropublic localhost interface(when I quering this the output is :Timeout:no response from localhost)
# rpm –ivh mrtg-2.10…………rpm [RH 9.0 Disk 02]
# vi /etc/sysconfig/i18n
Replace LANG=”en_US.UTF_8”
with LANG=”en_US”
# init 6
Making Configuration File:
# cfgmaker - -output=/etc/mrtg/shahin.cfg - - global “workdir: /var/www/html/traffic” - - global ‘options[ _ ]: growright, bits’ ropublic@localhost (when I quering this the output is :no file created)
please help me i don't know what to do...???i am novice please reply me in detail.......
no point moving onto the configmaker if an snmp walk isnt yet working.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.