Hi All
I have a Linksys WRV200 which is not connecting to an Openswan Server running on Ubuntu 10.04
It appears it's failing on Phase 2. Here is an output of the log on my WRV200:
Code:
000 "TunnelD": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelD": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 60s; rekey_fuzz: 100%; keyingtries: 5
000 "TunnelD": policy: PSK+ENCRYPT+TUNNEL+UP; prio: 16,16; interface: eth0;
000 "TunnelD": dpd: action:restart; delay:30; timeout:120;
000 "TunnelD": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelD": IKE algorithms wanted: 5_000-1-2, flags=-strict
000 "TunnelD": IKE algorithms found: 5_192-1_096-2,
000 "TunnelD": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelD": ESP algorithms loaded: 3_000-1, flags=strict
000 #265: "TunnelD":39770 STATE_MAIN_R2 (sent MR2, expecting MI3); EVENT_RETRANSMIT in 14s; lastdpd=-1s(seq in:0 out:0)
Also my /etc/ipsec.conf config file:
Code:
config setup
nat_traversal=no
conn vpn1
type=tunnel
left=xxx.xxx.xxx.xxx
leftsubnet=172.16.0.0/16
leftnexthop=%defaultroute
right=xxx.xxx.xxx.xxx
rightsubnet=172.1.0.0/16
rightnexthop=172.1.0.1
auto=start
pfs=no
esp=3des-md5
ike=3des-md5-modp1024
authby=secret
keyexchange=ike
ikelifetime=8h
keylife=1h
Any advice will be most welcome
BF
Any help with this would be much appreciated
500 points up for grabs
