LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking
User Name
Password
Linux - Networking This forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.

Notices


Reply
  Search this Thread
Old 04-21-2006, 11:37 AM   #1
Nikosis
Member
 
Registered: Dec 2005
Location: In front of the monitor
Distribution: Slackware
Posts: 322

Rep: Reputation: 59
Network


Hi
The thing is that I've got a computer with multiple network cards, and can't connet it to internet. It looks like everything has been installed, but after
"ifconfig" I've got something like this, without eth0 and eth1
[HTML]lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (1.4 b) TX bytes:0 (1.4 b)[/HTML]


after "cat /proc/net/dev"

[HTML]Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed


lo: 0 3339 0 0 0 0 0 0 3339 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[/HTML]
a computer is 64 bit tech. if it's metter

Ok that's what i've got after 'ifconfig eth0 192.168.0.1 netmask 255.255.255.0'
ifconfig -a

[HTML]eth0 Link encap:Ethernet HWaddr 00:08:E6:12:03:15
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask 255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX Packets:0 errors:0 dropped:0 overruns:0 frame:0
TX Packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0xcc00 Memory:fe9e000000-fe00000

eth1 Link encap:Ethernet HWaddr 00:08:E6:12:03:14
BROADCAST MULTICAST MTU:1500 Metric:1
RX Packets:0 errors:0 dropped:0 overruns:0 frame:0
TX Packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0xc800 Memory:fe9c000000-fe9e00000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (1.4 Kb) TX bytes:0 (1.4 Kb) [/HTML]

After 'ifconfig', same result, but without "eth1"

Thx
 
Old 04-21-2006, 12:44 PM   #2
voip_tech_2004
LQ Newbie
 
Registered: Aug 2004
Posts: 18

Rep: Reputation: 0
what is the problem exactly you are facing?

lo is just loopback for your internal traffic, it shoudl not affect your ablity to route traffic to default gw..

I would list

netstat -rn to see how your route is setup. and then ping the default gw.. and then ping dns server by ip and then go from there
 
Old 04-25-2006, 12:39 AM   #3
Nikosis
Member
 
Registered: Dec 2005
Location: In front of the monitor
Distribution: Slackware
Posts: 322

Original Poster
Rep: Reputation: 59
hi
I'll do my best
Thanks for advice,
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Fedora C2 - Wireless network drivers? Broadcom 802.11g Network Adapter FragTek Linux - Wireless Networking 7 01-22-2010 01:10 AM
Slackware 10 network configuration. Problem with 8139 network card drivers ! Padmakiran Linux - Networking 8 03-27-2007 07:48 AM
3c905C network card in docking station. Cannot activate network device eth0. pathelms Linux - Networking 4 04-12-2006 03:55 PM
Xandros mount point for Windows Network & NFS Network jaagut Linux - Distributions 1 09-14-2005 08:21 AM
Network speed problems on 15 user network to broadband wireless router AntWarrior Linux - Wireless Networking 2 12-02-2004 12:05 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Networking

All times are GMT -5. The time now is 12:35 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration