USB Problem in Red Hat 9

jagurscape · 08-19-2003, 07:08 AM

Hey guys,

First time i have ever gotten this error... When i boot up and red hat startup attempts to bring up the uhci usb controller... it fails... The dmesg output is as follows:

uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: No IRQ known for interrupt pin D of device 00:11.2. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
PCI: No IRQ known for interrupt pin D of device 00:11.3. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
PCI: No IRQ known for interrupt pin D of device 00:11.4. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: No IRQ known for interrupt pin D of device 00:11.2. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
PCI: No IRQ known for interrupt pin D of device 00:11.3. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
PCI: No IRQ known for interrupt pin D of device 00:11.4. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
application bug: wine(14697) has SIGCHLD set to SIG_IGN but calls wait().

all help is apprecaited

gbg · 08-19-2003, 08:19 AM

check BIOS settings!!! At boot time press Del (or the key to access BIOS settings) enable the USB setting and that's all!

jagurscape · 08-19-2003, 07:27 PM

USB setting is set to "enable all" which is my only usb option to set in bios... anymore ideas?

gbg · 08-20-2003, 03:51 AM

can i have shell access to your machine (temporarly)?

linuxtricks · 09-03-2003, 11:46 AM

I'm having a problem with RedHat 9. I'm seeing the following in dmesg:

dmesg |grep PCI

PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
PIIX4: IDE controller at PCI slot 00:07.1
sym53c8xx: at PCI bus 0, device 19, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
PCI: Enabling device 00:07.2 (0000 -> 0001)
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.

Can anyone help me with this?