The details are as follows:
00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) (prog-if 00 [VGA])
Subsystem: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Kernal :
2.6.9-5.EL
RPMS of Xorg :
kernel-2.6.9-5.EL.i686.rpm
kernel-devel-2.6.9-5.EL.i686.rpm
kernel-hugemem-devel-2.6.9-5.EL.i686.rpm
kernel-smp-devel-2.6.9-5.EL.i686.rpm
kernel-utils-2.4-13.1.48.i386.rpm
xorg-x11-6.8.1-23.EL.i386.rpm
xorg-x11-deprecated-libs-6.8.1-23.EL.i386.rpm
xorg-x11-deprecated-libs-devel-6.8.1-23.EL.i386.rpm
xorg-x11-devel-6.8.1-23.EL.i386.rpm
xorg-x11-font-utils-6.8.1-23.EL.i386.rpm
xorg-x11-libs-6.8.1-23.EL.i386.rpm
xorg-x11-Mesa-libGL-6.8.1-23.EL.i386.rpm
xorg-x11-Mesa-libGLU-6.8.1-23.EL.i386.rpm
xorg-x11-tools-6.8.1-23.EL.i386.rpm
xorg-x11-twm-6.8.1-23.EL.i386.rpm
xorg-x11-xauth-6.8.1-23.EL.i386.rpm
xorg-x11-xdm-6.8.1-23.EL.i386.rpm
xorg-x11-xfs-6.8.1-23.EL.i386.rpm
file : /etc/x11/xorg.conf contents :
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Philips 150S"
DisplaySize 300 230
HorizSync 30.0 - 63.0
VertRefresh 56.0 - 76.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Videocard vendor"
BoardName "Intel 845"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 8
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
==========================================================
In above file Depth 16/24 is not working which is the resolution mode of millienium colors for PHILIPS 150S LCD.
Thanks,
Shrinivas.
Quote:
Originally Posted by Lenard
Questions:
1. What hardware do you have???
2. Which kernel exactly???
3. What version of the xorg rpms are installed???
4. What does your /etc/x11/xorg.conf file look like??
The commands to help you answer the quiestions:
/sbin/lspci -v
/bin/rpm -qa --qf="%{n}-%{v}-%{r}.%{arch}.rpm\n" 'kernel*' 'xorg-x11*' | sort
/bin/cat /etc/x11/xorg.conf
|