no sound from AverTV card

melodiel · 01-18-2006, 10:56 AM

I have an Ubuntu Breezy Badger (ver 5.10, 2.6.12 kernel version). I also have an AverTV GO 007 card connected to my VCR (by two cables s-video and rca-audio). I can see in xawtv and mplayer good TV picture (in tvtime i see in black and white for some reason), but I have no sound.
Is there any way that you can help me to get a sound from the TV card?

I will be much obliged for any assitance.
Ben

Here is some information on my system.

lsmod:
------

Quote:

Module Size Used by
isofs 32824 1
udf 75524 0
rfcomm 34972 0
l2cap 22404 5 rfcomm
bluetooth 43012 4 rfcomm,l2cap
speedstep_lib 4228 0
cpufreq_userspace 4444 0
cpufreq_stats 5124 0
freq_table 4484 1 cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 5916 0
cpufreq_conservative 6820 0
video 16004 0
tc1100_wmi 6916 0
sony_acpi 5516 0
pcc_acpi 11392 0
hotkey 9508 0
dev_acpi 11396 0
i2c_acpi_ec 5760 0
button 6672 0
battery 9604 0
container 4608 0
ac 4996 0
ipv6 217408 13
af_packet 20232 2
tsdev 7616 0
floppy 52692 0
pcspkr 3652 0
rtc 11832 0
usblp 11776 1
ohci1394 30644 0
saa7134 98772 0
video_buf 19844 1 saa7134
v4l2_common 5888 1 saa7134
v4l1_compat 12420 1 saa7134
ir_common 7428 1 saa7134
sk98lin 166872 1
tpm_nsc 6528 0
tpm 9504 1 tpm_nsc
hw_random 5268 0
snd_hda_intel 15872 1
snd_hda_codec 72064 1 snd_hda_intel
snd_pcm_oss 46368 0
snd_mixer_oss 16128 1 snd_pcm_oss
snd_pcm 78344 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 21764 1 snd_pcm
snd 48644 8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9184 2 saa7134,snd
snd_page_alloc 10120 2 snd_hda_intel,snd_pcm
shpchp 80612 0
pci_hotplug 24628 1 shpchp
dm_mod 50364 1
evdev 9088 0
ivtv 178452 0
firmware_class 9472 1 ivtv
i2c_algo_bit 8584 1 ivtv
i2c_core 19728 3 i2c_acpi_ec,saa7134,i2c_algo_bit
videodev 9344 2 saa7134,ivtv
sr_mod 15652 0
sbp2 21128 0
ieee1394 90936 2 ohci1394,sbp2
psmouse 26116 0
mousedev 10912 1
parport_pc 31812 1
lp 11460 0
parport 32072 2 parport_pc,lp
md 40656 0
ext3 115976 1
jbd 48536 1 ext3
thermal 13192 0
processor 23100 1 thermal
fan 4740 0
ide_disk 16128 1
usb_storage 64704 0
usbhid 30688 0
siimage 11392 1
ehci_hcd 29448 0
uhci_hcd 28048 0
usbcore 104316 7 usblp,usb_storage,usbhid,ehci_hcd,uhci_hcd
sd_mod 17424 3
ide_cd 36996 1
cdrom 33952 2 sr_mod,ide_cd
ide_generic 1664 0
ata_piix 9476 0
ahci 11268 5
libata 47876 2 ata_piix,ahci
scsi_mod 124872 6 sr_mod,sbp2,usb_storage,sd_mod,ahci,libata
piix 9476 1
ide_core 125268 6 ide_disk,usb_storage,siimage,ide_cd,ide_generic,piix
unix 24624 790
vesafb 8088 0
capability 5000 0
commoncap 6784 1 capability
vga16fb 12232 1
vgastate 8320 1 vga16fb
softcursor 2432 2 vesafb,vga16fb
cfbimgblt 2944 2 vesafb,vga16fb
cfbfillrect 3840 2 vesafb,vga16fb
cfbcopyarea 4480 2 vesafb,vga16fb
fbcon 34176 72
tileblit 2560 1 fbcon
font 8448 1 fbcon
bitblit 5248 1 fbcon

dmesg:
======

Quote:

d Set 2 keyboard on isa0060/serio0
[4294675.281000] Capability LSM initialized
[4294675.290000] NET: Registered protocol family 1
[4294675.305000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294675.305000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294675.305000] ACPI: bus type ide registered
[4294675.314000] SCSI subsystem initialized
[4294675.315000] libata version 1.11 loaded.
[4294675.315000] ahci version 1.00
[4294675.315000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[4294680.953000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294680.953000] ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode
[4294680.953000] ahci(0000:00:1f.2) flags: 64bit ncq led slum part
[4294680.953000] ata1: SATA max UDMA/133 cmd 0xF886AD00 ctl 0x0 bmdma 0x0 irq 19
[4294680.953000] ata2: SATA max UDMA/133 cmd 0xF886AD80 ctl 0x0 bmdma 0x0 irq 19
[4294680.953000] ata3: SATA max UDMA/133 cmd 0xF886AE00 ctl 0x0 bmdma 0x0 irq 19
[4294680.953000] ata4: SATA max UDMA/133 cmd 0xF886AE80 ctl 0x0 bmdma 0x0 irq 19
[4294681.154000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:007f
[4294681.154000] ata1: dev 0 ATA, max UDMA/133, 240121728 sectors:
[4294681.154000] ata1: dev 0 configured for UDMA/133
[4294681.154000] scsi0 : ahci
[4294681.356000] ata2: no device found (phy stat 00000000)
[4294681.356000] scsi1 : ahci
[4294681.618000] ata3: no device found (phy stat 00000000)
[4294681.618000] scsi2 : ahci
[4294681.834000] ata4: no device found (phy stat 00000000)
[4294681.834000] scsi3 : ahci
[4294681.834000] Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5
[4294681.834000] Type: Direct-Access ANSI SCSI revision: 05
[4294681.842000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[4294681.842000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[4294681.842000] ICH6: chipset revision 3
[4294681.842000] ICH6: not 100% native mode: will probe irqs later
[4294681.842000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda

MA, hdb

MA
[4294681.842000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc

io, hdd

io
[4294681.842000] Probing IDE interface ide0...
[4294682.647000] hda: Pioneer DVD-ROM ATAPIModel DVD-117 0107, ATAPI CD/DVD-ROM drive
[4294683.423000] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[4294683.474000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294683.474000] Probing IDE interface ide1...
[4294684.120000] Probing IDE interface ide1...
[4294684.812000] Probing IDE interface ide2...
[4294685.325000] Probing IDE interface ide3...
[4294685.962000] Probing IDE interface ide4...
[4294686.540000] Probing IDE interface ide5...
[4294687.168000] hda: ATAPI 126X DVD-ROM drive, 256kB Cache
[4294687.168000] Uniform CD-ROM driver Revision: 3.20
[4294687.173000] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[4294687.184000] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
[4294687.184000] SCSI device sda: drive cache: write back
[4294687.184000] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
[4294687.184000] SCSI device sda: drive cache: write back
[4294687.184000] /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
[4294687.220000] Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
[4294687.723000] Attempting manual resume
[4294687.723000] swsusp: Suspend partition has wrong signature?
[4294687.768000] usbcore: registered new driver usbfs
[4294687.768000] usbcore: registered new driver hub
[4294687.768000] USB Universal Host Controller Interface driver v2.2
[4294687.768000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[4294687.768000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294687.768000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
[4294687.830000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294687.830000] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[4294687.830000] hub 1-0:1.0: USB hub found
[4294687.830000] hub 1-0:1.0: 2 ports detected
[4294687.833000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[4294687.833000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294687.833000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
[4294687.895000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294687.895000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[4294687.895000] hub 2-0:1.0: USB hub found
[4294687.895000] hub 2-0:1.0: 2 ports detected
[4294687.898000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[4294687.898000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294687.898000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
[4294687.960000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294687.960000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[4294687.960000] hub 3-0:1.0: USB hub found
[4294687.960000] hub 3-0:1.0: 2 ports detected
[4294687.963000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[4294687.963000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294687.963000] uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
[4294687.999000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[4294688.025000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294688.025000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[4294688.025000] hub 4-0:1.0: USB hub found
[4294688.025000] hub 4-0:1.0: 2 ports detected
[4294688.050000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[4294688.050000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294688.050000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
[4294688.050000] ehci_hcd 0000:00:1d.7: debug port 1
[4294688.050000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294688.050000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdffff800
[4294688.054000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294688.054000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294688.054000] hub 5-0:1.0: USB hub found
[4294688.054000] hub 5-0:1.0: 8 ports detected
[4294688.129000] SiI680: IDE controller at PCI slot 0000:06:01.0
[4294688.129000] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22
[4294688.129000] SiI680: chipset revision 2
[4294688.129000] SiI680: BASE CLOCK == 133
[4294688.129000] SiI680: 100% native mode on irq 22
[4294688.129000] ide2: MMIO-DMA , BIOS settings: hde

io, hdf

io
[4294688.129000] ide3: MMIO-DMA , BIOS settings: hdg

io, hdh

io
[4294688.129000] Probing IDE interface ide2...
[4294688.393000] hde: IC35L040AVER07-0, ATA DISK drive
[4294688.434000] usb 5-2: new high speed USB device using ehci_hcd and address 2
[4294689.000000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[4294689.005000] ide2 at 0xf8888480-0xf8888487,0xf888848a on irq 22
[4294689.005000] Probing IDE interface ide3...
[4294689.321000] usb 4-1: new full speed USB device using uhci_hcd and address 2
[4294689.473000] hdh: WDC WD2500PB-00FBA0, ATA DISK drive
[4294689.525000] ide3 at 0xf88884c0-0xf88884c7,0xf88884ca on irq 22
[4294691.554000] usbcore: registered new driver hiddev
[4294691.571000] input: USB HID v1.00 Mouse [Acrox USB Email Mouse Acrox USB Email Mouse] on usb-0000:00:1d.2-1
[4294691.571000] usbcore: registered new driver usbhid
[4294691.571000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294691.594000] Initializing USB Mass Storage driver...
[4294691.594000] scsi4 : SCSI emulation for USB Mass Storage devices
[4294691.594000] usb-storage: device found at 2
[4294691.594000] usb-storage: waiting for device to settle before scanning
[4294691.594000] usbcore: registered new driver usb-storage
[4294691.594000] USB Mass Storage support registered.
[4294691.601000] hde: max request size: 64KiB
[4294691.609000] hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
[4294691.609000] hde: cache flushes not supported
[4294691.609000] /dev/ide/host2/bus0/target0/lun0: p1 p2 < >
[4294691.636000] hdh: max request size: 64KiB
[4294691.761000] hdh: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
[4294691.763000] hdh: cache flushes supported
[4294691.763000] /dev/ide/host2/bus1/target1/lun0:
[4294692.226000] ACPI: CPU0 (power states: C1[C1])
[4294692.226000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294692.345000] Attempting manual resume
[4294692.345000] swsusp: Suspend partition has wrong signature?
[4294692.354000] kjournald starting. Commit interval 5 seconds
[4294692.354000] EXT3-fs: mounted filesystem with ordered data mode.
[4294693.606000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294696.332000] Adding 2409708k swap on /dev/sda5. Priority:-1 extents:1
[4294696.480000] EXT3 FS on sda2, internal journal
[4294696.598000] Vendor: GENERIC Model: USB Storage-SMC Rev: I19B
[4294696.598000] Type: Direct-Access ANSI SCSI revision: 00
[4294696.602000] Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 0
[4294696.607000] Vendor: GENERIC Model: USB Storage-CFC Rev: I19B
[4294696.607000] Type: Direct-Access ANSI SCSI revision: 00
[4294696.611000] Attached scsi removable disk sdc at scsi4, channel 0, id 0, lun 1
[4294696.615000] Vendor: GENERIC Model: USB Storage-SDC Rev: I19B
[4294696.615000] Type: Direct-Access ANSI SCSI revision: 00
[4294696.618000] Attached scsi removable disk sdd at scsi4, channel 0, id 0, lun 2
[4294696.624000] Vendor: GENERIC Model: USB Storage-MSC Rev: I19B
[4294696.624000] Type: Direct-Access ANSI SCSI revision: 00
[4294696.627000] Attached scsi removable disk sde at scsi4, channel 0, id 0, lun 3
[4294696.628000] usb-storage: device scan complete
[4294701.979000] parport: PnPBIOS parport detected.
[4294701.979000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[4294702.075000] lp0: using parport0 (interrupt-driven).
[4294702.105000] mice: PS/2 mouse device common for all mice
[4294702.146000] ieee1394: Initialized config rom entry `ip1394'
[4294702.166000] sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
[4294702.192000] Linux video capture interface: v1.00
[4294702.209000] ivtv: ==================== START INIT IVTV ====================
[4294702.209000] ivtv: version 0.4.1 (tagged release) loading
[4294702.209000] ivtv: Linux version: 2.6.12-10-386 386 gcc-3.4
[4294702.209000] ivtv: In case of problems please include the debug info between
[4294702.209000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with
[4294702.209000] ivtv: any module options, when mailing the ivtv-users mailinglist.
[4294702.209000] ivtv: ==================== END INIT IVTV ====================
[4294705.096000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294705.741000] cdrom: open failed.
[4294709.277000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294709.286000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294709.432000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294709.432000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294710.180000] hw_random hardware driver 1.0.0 loaded
[4294710.472000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294710.472000] sk98lin: Network Device Driver v8.23.1.3
[4294710.472000] (C)Copyright 1999-2005 Marvell(R).
[4294710.472000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294710.472000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[4294710.529000] eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
[4294710.529000] PrefPort:A RlmtMode:Check Link State
[4294710.613000] saa7130/34: v4l2 driver version 0.2.12 loaded
[4294710.615000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[4294710.615000] saa7133[0]: found at 0000:06:00.0, rev: 208, irq: 21, latency: 32, mmio: 0xdfeff800
[4294710.615000] saa7133[0]: subsystem: 1461:f31f, board: UNKNOWN/GENERIC [card=0,autodetected]
[4294710.615000] saa7133[0]: board init: gpio is 80698
[4294710.615000] saa7133[0]: dsp access wait timeout [bit=WRR]
[4294710.616000] saa7133[0]: dsp access wait timeout [bit=WRR]
[4294710.726000] saa7133[0]: i2c eeprom 00: 61 14 1f f3 ff ff ff ff ff ff ff ff ff ff ff ff
[4294710.726000] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294710.726000] saa7133[0]: i2c eeprom 20: ff d2 fe ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294710.726000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294710.750000] saa7133[0]: registered device video0 [v4l2]
[4294710.763000] saa7133[0]: registered device vbi0
[4294710.881000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
[4294710.881000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294710.885000] ohci1394: fw-host0: Unexpected PCI resource length of 1000!
[4294710.937000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[dfefe000-dfefe7ff] Max Packet=[2048]
[4294712.208000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001111000024d418]
[4294712.482000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3304
[4294712.487000] usbcore: registered new driver usblp
[4294712.487000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[4294712.710000] Real Time Clock Driver v1.12
[4294712.805000] input: PC Speaker
[4294712.884000] Floppy drive(s): fd0 is 1.44M
[4294712.899000] FDC 0 is a post-1991 82077
[4294713.185000] ts: Compaq touchscreen protocol output
[4294714.127000] NET: Registered protocol family 17
[4294716.381000] eth0: network connection up using port A
[4294716.381000] speed: 10
[4294716.381000] autonegotiation: yes
[4294716.381000] duplex mode: half
[4294716.381000] flowctrl: none
[4294716.381000] irq moderation: disabled
[4294716.381000] tcp offload: enabled
[4294716.381000] scatter-gather: enabled
[4294716.381000] tx-checksum: enabled
[4294716.381000] rx-checksum: enabled
[4294716.381000] rx-polling: enabled
[4294722.120000] NET: Registered protocol family 10
[4294722.120000] Disabled Privacy Extensions on device c02eb280(lo)
[4294722.120000] IPv6 over IPv4 tunneling driver
[4294723.130000] ACPI: Power Button (FF) [PWRF]
[4294723.130000] ACPI: Power Button (CM) [PWRB]
[4294723.209000] ibm_acpi: ec object not found
[4294730.264000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294730.264000] apm: overridden by ACPI.
[4294732.648000] eth0: no IPv6 routers present
[4294736.728000] Bluetooth: Core ver 2.7
[4294736.728000] NET: Registered protocol family 31
[4294736.728000] Bluetooth: HCI device and connection manager initialized
[4294736.728000] Bluetooth: HCI socket layer initialized
[4294736.823000] Bluetooth: L2CAP ver 2.7
[4294736.823000] Bluetooth: L2CAP socket layer initialized
[4294736.859000] Bluetooth: RFCOMM ver 1.5
[4294736.859000] Bluetooth: RFCOMM socket layer initialized
[4294736.859000] Bluetooth: RFCOMM TTY layer initialized
[4295053.974000] ibm_acpi: ec object not found

lspci:
======

Quote:

0000:00:00.0 Host bridge: Intel Corp. 925X Memory Controller Hub (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 925X PCI Express Root Port (rev 04)
0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1c.2 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
0000:00:1c.3 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5b60
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
0000:04:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown device 4361 (rev 17)
0000:06:00.0 Multimedia controller: Philips Semiconductors SAA7133 Audio+video broadcast decoder (rev d0)
0000:06:01.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0680 Ultra ATA-133 Host Controller (rev 02)
0000:06:05.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61)