I've recently aquired a brand new HP 3400cse scanner, and ive been working on it a bit. Apparently, SANE supports it, but indirectly. There have been records of getting a 3400cse scanner working under Linux, i read so on a website, however i lost the website. :-( Here's the mission-critical information below:
[ben@Darkflame ben]$ /sbin/lsusb
Bus 001 Device 003: ID 03f0:1604 Hewlett-Packard
Bus 001 Device 002: ID 03f0:0405 Hewlett-Packard ScanJet 3400cse
Bus 001 Device 001: ID 0000:0000
[ben@Darkflame ben]$ uname -r
2.6.6-1.435.2.3
any ideas? below is the output of dmesg, which is very long and confusing. PLEASE resond if you have ANY ideas what-so-ever! Thanks always!
--Benji
brose@nac.net
[ben@Darkflame ben]$ dmesg
, hdd
MA
hda: Maxtor 6Y080P0, ATA DISK drive
hdb: Maxtor 6Y120P0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG DVD-ROM SD-616Q, ATAPI CD/DVD-ROM drive
hdd: SONY DVD RW DRU-510A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1
hdb: max request size: 128KiB
hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: hdb1 hdb2
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 144k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022deac0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:02:00.0: OHCI Host Controller
ohci_hcd 0000:02:00.0: irq 10, pci mem 22a63000
ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb 1-1: new full speed USB device using address 2
usb 1-2: new full speed USB device using address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1604
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
EXT3 FS on hdb1, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised:
dm@uk.sistina.com
cdrom: open failed.
Adding 2097136k swap on /dev/hdb2. Priority:-1 extents:1
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4092 buckets, 32736 max) - 296 bytes per conntrack
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
PPP Deflate Compression module registered
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0x52021000, irq 10, MAC addr 00:E0:81:28:06
3
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
divert: allocating divert_blk for eth1
Bluetooth: Core ver 2.5
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.2
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon: Module vmmon: registered with major=10 minor=165
/dev/vmmon: Module vmmon: initialized
/dev/vmnet: open called by PID 2363 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 2375 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 3078 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
divert: allocating divert_blk for vmnet8
/dev/vmnet: open called by PID 3079 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
divert: allocating divert_blk for vmnet1
/dev/vmnet: open called by PID 3141 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 3124 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
inserting floppy driver for 2.6.6-1.435.2.3
Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
FDC 0 is a post-1991 82077
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 100 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 100 ret -110
spurious 8259A interrupt: IRQ7.
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 100 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 100 ret -110
usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd testtool rqt 64 rq 12 len 1 ret -110usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: control timeout on ep0in
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbmodules rqt 128 rq 6 len 18 ret -110
usb 1-1: USB disconnect, address 2
usb 1-1: new full speed USB device using address 4
HP 3400cse Linux SANE support
