How to configure Docuprint M225 dw Xerox

bomnaz · 05-09-2018, 02:43 AM

hello team,

I have installed Docuprint M225dw FujiXerox printer in Fedora, the printing works find, the issue is with the scanner.

In Xsane the scanner is not detected.

Any idea how to make it work.
Thanks.

_roman_ · 05-09-2018, 06:16 AM

did you bother using google, and reading the first result?

https://askubuntu.com/questions/9368...to-be-detected

Quote:

also buy Fuji Xerox DocuPrint M225 dw and I have problems about scanner driver installation on my linux laptop too (Ubuntu 14.04). I have tried with several methods to install it. Fortunately, I've found the way to make it works.

I have installed Fuji Xerox DocuPrint M225 dw driver using Brother DCP-L2540DW driver. Followed by these steps.

Connect the scanner to the network and setup the IP address for it. For example 172.18.9.103

Download and install driver brscan4-0.4.2-1.amd64.deb or brscan4-0.4.2-1.i386.deb. For this example using the 64bit version.

$ wget http://www.brother.com/pub/bsc/linux....2-1.amd64.deb

$ sudo dpkg -i brscan4-0.4.2-1.amd64.deb

Add network scanner with this command.

$ brsaneconfig4 -a \
name=FX-DocuPrint-M225-dw \
model=DCP-L2540DW \
ip=172.18.9.103

The configurations are stored in /opt/brother/scanner/brscan4/brsanenetdevice4.cfg

Make sure brother4 is in /etc/sane.d/dll.conf and uncomment.

Open simple-scan. The title Brother *FX-DocuPrint-M225-dw should be displayed in Scan Source.