Linux - Hardware This forum is for Hardware issues.
Notices
Welcome to
LinuxQuestions.org , a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free.
Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
Are you new to LinuxQuestions.org? Visit the following links:
Site Howto |
Site FAQ |
Sitemap |
Register Now
If you have any problems with the registration process or your account login, please
contact us . If you need to reset your password,
click here .
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a
virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month.
Click here for more info.
#1
Member
Registered: Oct 2010
Location: California
Distribution: Ubuntu 12.10 x64
Posts: 41
Rep:
Cirago USB 2.0 External Portable Hard Drive 80 GB CST1080
I have the external hard drive stated in the title of the thread. Also can be found here:
http://www.amazon.com/Cirago-Externa...1599549&sr=8-1
Anywho, I plug it in, and the light on it flashes green to red every second. And I can't connect through it with nautilus. So I assume there's a missing driver possibly? I can't find it on the web if it is. Any help would be appreciated.
Last edited by Kronus980; 03-12-2012 at 07:59 PM .
#2
Member
Registered: Aug 2005
Location: D.i.t.h.o, Texas
Distribution: Slackware 13.x, rhel3/5, Solaris 8-10(sparc), HP-UX 11.x (pa-risc)
Posts: 988
Greetingz!NOTE: Any output you choose to put in a replay should be encapsulated with [code] & [/code] tags.)How to listen 1) Fire-up a Terminal.2) Type 'dmesg ', you should see a lot of hardware-related output.3) Press enter a few times to get yourself a few blank lines.4) Plug in your device.5) Type 'dmesg | tail -50 ' look for differences.sda [sda1] )
#3
Member
Registered: Oct 2010
Location: California
Distribution: Ubuntu 12.10 x64
Posts: 41
Original Poster
Rep:
I got nothing! Anyother ways?
#4
Member
Registered: Aug 2005
Location: D.i.t.h.o, Texas
Distribution: Slackware 13.x, rhel3/5, Solaris 8-10(sparc), HP-UX 11.x (pa-risc)
Posts: 988
Nothing?1) Shutdown the box. Leave the External drive unplugged.2) Power-on the box, login.3) Wait about 4 minutes.4) Plug in the drive once , wait two minutes.5) Open a Terminal, type 'dmesg | tee -a ~/Desktop/output.txt '6) Double-Click on the output.txt file that popped-up on your Desktop and slap it between some "code" tags here in LQ.[code] & [/code] )
#5
Member
Registered: Oct 2010
Location: California
Distribution: Ubuntu 12.10 x64
Posts: 41
Original Poster
Rep:
Says it was too long :/
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-16-generic (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #29-Ubuntu SMP Tue Feb 14 12:48:51 UTC 2012 (Ubuntu 3.0.0-16.29-generic 3.0.20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic root=UUID=ffe57b46-57ac-40b2-969f-7dea2424a315 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdea8000 (usable)
[ 0.000000] BIOS-e820: 00000000bdea8000 - 00000000bdebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdebf000 - 00000000bdf81000 (usable)
[ 0.000000] BIOS-e820: 00000000bdf81000 - 00000000bdfbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdfbf000 - 00000000bdfe1000 (usable)
[ 0.000000] BIOS-e820: 00000000bdfe1000 - 00000000bdff7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdff7000 - 00000000be000000 (usable)
[ 0.000000] BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP HDX18 Notebook PC/3610, BIOS F.34 12/08/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000be000000
[ 0.000000] 0000000000 - 00be000000 page 2M
[ 0.000000] kernel direct mapping tables up to be000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bdffa000-be000000
[ 0.000000] RAMDISK: 365ba000 - 372d5000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000bdff6120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bdff4000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bdfe4000 0B871 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bdf8d000 00040
[ 0.000000] ACPI: DMAR 00000000bdff5000 00060 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000bdff3000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000bdff2000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bdff1000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! 00000000bdff0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000bdfe3000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: BOOT 00000000bdfe2000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bdfe1000 00655 (v01 PmRef CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bdea8
[ 0.000000] 0: 0x000bdebf -> 0x000bdf81
[ 0.000000] 0: 0x000bdfbf -> 0x000bdfe1
[ 0.000000] 0: 0x000bdff7 -> 0x000be000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1040163
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 759757 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bdea8000 - 00000000bdebf000
[ 0.000000] PM: Registered nosave memory: 00000000bdf81000 - 00000000bdfbf000
[ 0.000000] PM: Registered nosave memory: 00000000bdfe1000 - 00000000bdff7000
[ 0.000000] PM: Registered nosave memory: 00000000be000000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s79616 r8192 d22784 u524288
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1022238
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic root=UUID=ffe57b46-57ac-40b2-969f-7dea2424a315 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /build/buildd/linux-3.0.0/drivers/pci/dmar.c:634 warn_invalid_dmar+0x8f/0xa0()
[ 0.000000] Hardware name: HP HDX18 Notebook PC
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
[ 0.000000] BIOS vendor: Hewlett-Packard; Ver: F.34; Product Version: Rev 1
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 3.0.0-16-generic #29-Ubuntu
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8105e8ff>] warn_slowpath_common+0x7f/0xc0
[ 0.000000] [<ffffffff815ff08c>] ? bad_to_user+0x7f6/0x7f6
[ 0.000000] [<ffffffff8105e99f>] warn_slowpath_fmt_taint+0x3f/0x50
[ 0.000000] [<ffffffff81ce76f2>] ? early_ioremap+0x13/0x15
[ 0.000000] [<ffffffff81cdd28d>] ? __acpi_map_table+0x13/0x19
[ 0.000000] [<ffffffff8132583f>] warn_invalid_dmar+0x8f/0xa0
[ 0.000000] [<ffffffff8136cc80>] ? acpi_tb_verify_table+0x54/0x58
[ 0.000000] [<ffffffff81cffc7d>] check_zero_address+0x57/0xff
[ 0.000000] [<ffffffff815ff08c>] ? bad_to_user+0x7f6/0x7f6
[ 0.000000] [<ffffffff81cffd3b>] detect_intel_iommu+0x16/0xad
[ 0.000000] [<ffffffff81cd8b54>] pci_iommu_alloc+0x44/0x6f
[ 0.000000] [<ffffffff81ce7147>] mem_init+0x19/0xec
[ 0.000000] [<ffffffff81cd0a2c>] start_kernel+0x1d5/0x3df
[ 0.000000] [<ffffffff81cd0388>] x86_64_start_reservations+0x132/0x136
[ 0.000000] [<ffffffff81cd0140>] ? early_idt_handlers+0x140/0x140
[ 0.000000] [<ffffffff81cd0459>] x86_64_start_kernel+0xcd/0xdc
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] Memory: 4007852k/5242880k available (6140k kernel code, 1082228k absent, 152800k reserved, 6894k data, 988k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.905 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.81 BogoMIPS (lpj=10107620)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004036] Security Framework initialized
[ 0.004054] AppArmor: AppArmor initialized
[ 0.004055] Yama: becoming mindful.
[ 0.004432] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008751] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009678] Mount-cache hash table entries: 256
[ 0.009825] Initializing cgroup subsys cpuacct
[ 0.009830] Initializing cgroup subsys memory
[ 0.009839] Initializing cgroup subsys devices
[ 0.009841] Initializing cgroup subsys freezer
[ 0.009843] Initializing cgroup subsys net_cls
[ 0.009845] Initializing cgroup subsys blkio
[ 0.009852] Initializing cgroup subsys perf_event
[ 0.009881] CPU: Physical Processor ID: 0
[ 0.009882] CPU: Processor Core ID: 0
[ 0.009884] mce: CPU supports 6 MCE banks
[ 0.009893] CPU0: Thermal monitoring enabled (TM1)
[ 0.009897] using mwait in idle threads.
[ 0.012248] ACPI: Core revision 20110413
[ 0.020019] ftrace: allocating 25748 entries in 101 pages
[ 0.024070] DMAR: Host address width 36
[ 0.024073] DMAR: DRHD base: 0x00000000000000 flags: 0x1
[ 0.024075] DMAR: parse DMAR table failure.
[ 0.024434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067813] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 99000
[ 0.156025] Brought up 2 CPUs
[ 0.156028] Total of 2 processors activated (10107.78 BogoMIPS).
[ 0.157132] devtmpfs: initialized
[ 0.157132] PM: Registering ACPI NVS region at bdf81000 (253952 bytes)
[ 0.157237] print_constraints: dummy:
[ 0.157261] Time: 7:04:13 Date: 03/16/12
[ 0.157295] NET: Registered protocol family 16
[ 0.157321] Trying to unpack rootfs image as initramfs...
[ 0.157412] ACPI: bus type pci registered
[ 0.157479] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.157482] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.170426] PCI: Using configuration type 1 for base access
[ 0.171182] bio: create slab <bio-0> at 0
[ 0.172991] ACPI: EC: Look up EC in DSDT
[ 0.175983] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.308431] ACPI: SSDT 00000000bdeb4c18 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20060317)
[ 0.308842] ACPI: Dynamic OEM Table Load:
[ 0.308844] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20060317)
[ 0.308978] ACPI: SSDT 00000000bdeb2618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20060317)
[ 0.309371] ACPI: Dynamic OEM Table Load:
[ 0.309374] ACPI: SSDT (null) 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20060317)
[ 0.376324] ACPI: SSDT 00000000bdeb3e18 001CF (v01 PmRef ApIst 00003000 INTL 20060317)
[ 0.376745] ACPI: Dynamic OEM Table Load:
[ 0.376748] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20060317)
[ 0.390740] Freeing initrd memory: 13420k freed
[ 0.400214] ACPI: SSDT 00000000bdeb4f18 0008D (v01 PmRef ApCst 00003000 INTL 20060317)
[ 0.400625] ACPI: Dynamic OEM Table Load:
[ 0.400627] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20060317)
[ 0.412115] ACPI: Interpreter enabled
[ 0.412120] ACPI: (supports S0 S3 S4 S5)
[ 0.412149] ACPI: Using IOAPIC for interrupt routing
[ 0.420644] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.420818] ACPI: No dock devices found.
[ 0.420820] HEST: Table not found.
[ 0.420823] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.421104] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.421571] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.421573] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.421576] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.421579] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.421591] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.421612] DMAR: Forcing write-buffer flush capability
[ 0.421614] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.421637] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[ 0.421675] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.421678] pci 0000:00:01.0: PME# disabled
[ 0.421723] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.421773] pci 0000:00:1a.0: reg 20: [io 0x80e0-0x80ff]
[ 0.421834] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.421885] pci 0000:00:1a.1: reg 20: [io 0x80c0-0x80df]
[ 0.421957] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.421982] pci 0000:00:1a.7: reg 10: [mem 0xdd005c00-0xdd005fff]
[ 0.422087] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.422092] pci 0000:00:1a.7: PME# disabled
[ 0.422119] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.422136] pci 0000:00:1b.0: reg 10: [mem 0xdd000000-0xdd003fff 64bit]
[ 0.422218] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.422222] pci 0000:00:1b.0: PME# disabled
[ 0.422244] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.422329] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.422333] pci 0000:00:1c.0: PME# disabled
[ 0.422357] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.422442] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.422445] pci 0000:00:1c.1: PME# disabled
[ 0.422473] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.422557] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.422561] pci 0000:00:1c.3: PME# disabled
[ 0.422585] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.422670] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.422674] pci 0000:00:1c.4: PME# disabled
[ 0.422698] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.422783] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.422787] pci 0000:00:1c.5: PME# disabled
[ 0.422814] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.422864] pci 0000:00:1d.0: reg 20: [io 0x80a0-0x80bf]
[ 0.422926] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.422976] pci 0000:00:1d.1: reg 20: [io 0x8080-0x809f]
[ 0.423037] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.423087] pci 0000:00:1d.2: reg 20: [io 0x8060-0x807f]
[ 0.423148] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
[ 0.423198] pci 0000:00:1d.3: reg 20: [io 0x8040-0x805f]
[ 0.423269] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.423294] pci 0000:00:1d.7: reg 10: [mem 0xdd005800-0xdd005bff]
[ 0.423399] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.423404] pci 0000:00:1d.7: PME# disabled
[ 0.423428] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.423503] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 0.423641] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.423663] pci 0000:00:1f.2: reg 10: [io 0x8108-0x810f]
[ 0.423673] pci 0000:00:1f.2: reg 14: [io 0x8114-0x8117]
[ 0.423682] pci 0000:00:1f.2: reg 18: [io 0x8100-0x8107]
[ 0.423691] pci 0000:00:1f.2: reg 1c: [io 0x8110-0x8113]
[ 0.423700] pci 0000:00:1f.2: reg 20: [io 0x8020-0x803f]
[ 0.423709] pci 0000:00:1f.2: reg 24: [mem 0xdd005000-0xdd0057ff]
[ 0.423765] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.423769] pci 0000:00:1f.2: PME# disabled
[ 0.423789] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.423806] pci 0000:00:1f.3: reg 10: [mem 0xdd006000-0xdd0060ff 64bit]
[ 0.423831] pci 0000:00:1f.3: reg 20: [io 0x8000-0x801f]
[ 0.423873] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[ 0.423900] pci 0000:00:1f.6: reg 10: [mem 0xdd004000-0xdd004fff 64bit]
[ 0.424056] pci 0000:01:00.0: [10de:0649] type 0 class 0x000300
[ 0.424079] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.424103] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.424128] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit]
[ 0.424146] pci 0000:01:00.0: reg 24: [io 0x7000-0x707f]
[ 0.424164] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.432051] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.432054] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.432057] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 0.432061] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.432136] pci 0000:02:00.0: [8086:4237] type 0 class 0x000280
[ 0.432172] pci 0000:02:00.0: reg 10: [mem 0xdc000000-0xdc001fff 64bit]
[ 0.432345] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.432351] pci 0000:02:00.0: PME# disabled
[ 0.440045] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.440049] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.440054] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xdcffffff]
[ 0.440060] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 0.440127] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.440145] pci 0000:03:00.0: reg 10: [io 0x5000-0x50ff]
[ 0.440177] pci 0000:03:00.0: reg 18: [mem 0xd4010000-0xd4010fff 64bit pref]
[ 0.440198] pci 0000:03:00.0: reg 20: [mem 0xd4000000-0xd400ffff 64bit pref]
[ 0.440211] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.440286] pci 0000:03:00.0: supports D1 D2
[ 0.440288] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.440292] pci 0000:03:00.0: PME# disabled
[ 0.448042] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.448046] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.448050] pci 0000:00:1c.1: bridge window [mem 0xdb000000-0xdbffffff]
[ 0.448056] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[ 0.448124] pci 0000:05:00.0: [1131:7160] type 0 class 0x000480
[ 0.448153] pci 0000:05:00.0: reg 10: [mem 0xda000000-0xda0fffff 64bit]
[ 0.448299] pci 0000:05:00.0: supports D1 D2
[ 0.448300] pci 0000:05:00.0: PME# supported from D0 D1 D2
[ 0.448306] pci 0000:05:00.0: PME# disabled
[ 0.448332] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.448343] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.448347] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.448351] pci 0000:00:1c.3: bridge window [mem 0xda000000-0xdaffffff]
[ 0.448357] pci 0000:00:1c.3: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]
[ 0.448425] pci 0000:06:00.0: [197b:2380] type 0 class 0x000c00
[ 0.448449] pci 0000:06:00.0: reg 10: [mem 0xd9000000-0xd90007ff]
[ 0.448467] pci 0000:06:00.0: reg 14: [mem 0xd9000d00-0xd9000d7f]
[ 0.448517] pci 0000:06:00.0: reg 20: [mem 0xd9000c80-0xd9000cff]
[ 0.448535] pci 0000:06:00.0: reg 24: [mem 0xd9000c00-0xd9000c7f]
[ 0.448669] pci 0000:06:00.1: [197b:2382] type 0 class 0x000880
[ 0.448691] pci 0000:06:00.1: reg 10: [mem 0xd9000b00-0xd9000bff]
[ 0.448878] pci 0000:06:00.2: [197b:2381] type 0 class 0x000805
[ 0.448899] pci 0000:06:00.2: reg 10: [mem 0xd9000a00-0xd9000aff]
[ 0.449087] pci 0000:06:00.3: [197b:2383] type 0 class 0x000880
[ 0.449108] pci 0000:06:00.3: reg 10: [mem 0xd9000900-0xd90009ff]
[ 0.449296] pci 0000:06:00.4: [197b:2384] type 0 class 0x000880
#6
Member
Registered: Aug 2005
Location: D.i.t.h.o, Texas
Distribution: Slackware 13.x, rhel3/5, Solaris 8-10(sparc), HP-UX 11.x (pa-risc)
Posts: 988
Quote:
Originally Posted by
Kronus980
Says it was too long :/
Drat, well in that case, I'll need the last 50 lines.
Code:
dmesg | tail -50 | tee -a ~/Desktop/output_new.txt
#7
Member
Registered: Oct 2010
Location: California
Distribution: Ubuntu 12.10 x64
Posts: 41
Original Poster
Rep:
Code:
[ 20.138339] cfg80211: Disabling freq 5640 MHz
[ 20.138340] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[ 20.138343] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.138345] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[ 20.138347] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.138349] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[ 20.138351] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.138353] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 20.138355] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm)
[ 20.138357] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 20.138359] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm)
[ 20.138361] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 20.138363] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm)
[ 20.138365] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 20.138367] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm)
[ 20.138369] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 20.138372] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm)
[ 20.138375] cfg80211: Regulatory domain changed to country: US
[ 20.138377] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.138379] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 20.138381] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 20.138383] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.138386] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.138388] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.138390] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 21.241684] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 28.721329] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0
[ 31.072043] wlan0: no IPv6 routers present
[ 150.147616] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 1
[ 347.329603] iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 10
[ 482.916089] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = 00:26:62:91:f6:12 tid = 0
[ 597.020166] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = 00:26:62:91:f6:12 tid = 0
[ 903.948120] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = 00:26:62:91:f6:12 tid = 0
[ 1025.321802] iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = 00:26:62:91:f6:12 tid = 0
[ 2215.837727] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[ 2215.837731] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[ 2215.844408] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[ 2215.844411] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[ 2216.214388] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[ 2216.214392] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[ 2216.220326] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[ 2216.220330] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[ 2303.095950] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[ 2303.095960] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[ 2303.101702] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[ 2303.101710] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[ 2408.714288] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[ 2408.714294] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[ 2408.738652] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[ 2408.738662] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
All of it ^ Shorter this time.
#8
Moderator
Registered: Aug 2002
Posts: 25,740
Post the output of the lsusb command.
#9
Member
Registered: Oct 2010
Location: California
Distribution: Ubuntu 12.10 x64
Posts: 41
Original Poster
Rep:
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 5986:0137 Acer, Inc
Bus 006 Device 002: ID 138a:0001 Validity Sensors, Inc. VFS101 Fingeprint Reader
Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
lsusb output
#10
Member
Registered: Aug 2005
Location: D.i.t.h.o, Texas
Distribution: Slackware 13.x, rhel3/5, Solaris 8-10(sparc), HP-UX 11.x (pa-risc)
Posts: 988
Quote:
Originally Posted by
Kronus980
lsusb output
Okay, now attach the drive and run that command again.
#11
Member
Registered: Oct 2010
Location: California
Distribution: Ubuntu 12.10 x64
Posts: 41
Original Poster
Rep:
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 5986:0137 Acer, Inc
Bus 006 Device 002: ID 138a:0001 Validity Sensors, Inc. VFS101 Fingeprint Reader
Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
I got the same output.
#12
Member
Registered: Aug 2005
Location: D.i.t.h.o, Texas
Distribution: Slackware 13.x, rhel3/5, Solaris 8-10(sparc), HP-UX 11.x (pa-risc)
Posts: 988
Quote:
Originally Posted by
Kronus980
[CODE]I got the same output.
Odd, doesn't look like it's connected at all...what does this show? (Run it about 15 seconds after plugging-in the USB drive).
#13
Member
Registered: Oct 2010
Location: California
Distribution: Ubuntu 12.10 x64
Posts: 41
Original Poster
Rep:
Code:
[39378.264459] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[39378.264469] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[39378.627192] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[39378.627198] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[39378.633240] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[39378.633250] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[39378.686137] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[39378.686141] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[39378.692246] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[39378.692250] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41634.156730] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[41634.156740] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41634.162211] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[41634.162220] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41634.566384] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[41634.566395] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41634.572791] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[41634.572800] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41710.693879] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[41710.693889] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41710.715705] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[41710.715715] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41712.155136] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[41712.155146] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41712.161402] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[41712.161410] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41991.627245] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[41991.627255] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41991.656782] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[41991.656792] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41991.938568] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[41991.938574] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41991.944315] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[41991.944318] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41992.951910] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[41992.951920] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[41992.957938] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[41992.957946] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[42241.715783] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[42241.715793] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[42241.746804] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[42241.746814] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[42340.980608] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[42340.980619] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[42340.997969] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[42340.997979] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[45285.953410] atkbd serio0: Unknown key pressed (translated set 2, code 0x94 on isa0060/serio0).
[45285.953420] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[45285.978727] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[45285.978731] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
#14
Member
Registered: Aug 2005
Location: D.i.t.h.o, Texas
Distribution: Slackware 13.x, rhel3/5, Solaris 8-10(sparc), HP-UX 11.x (pa-risc)
Posts: 988
Okay, too many "atkbd serio0" lines.
1) Unplug the USB drive. Wait 10 to 20 seconds.
2) Type out the below command, but don't press enter just yet.
Code:
dmesg | egrep -v "atkbd serio0" | tail -50
3) Plugin the USB drive, wait 10 seconds.
4) Press the Enter key for the above command.
It *really* looks like this USB device is not showing up. Does it have some sort of external power adapter, too?
Last edited by xeleema; 03-20-2012 at 08:05 AM .
#15
Member
Registered: Apr 2009
Location: Melbourne
Distribution: Fedora & CentOS
Posts: 854
Rep:
I see from the pictures in the link you posted, that it is a 2.5" drive with a Y cable? Are both ends connected to the USB on the computer?? 2.5" external drives like that sometimes have trouble with power.
All times are GMT -5. The time now is 12:52 AM .
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know .
