my fedora 10 booting stops at starting udev for 5-6 minutes.when i pressed 'i' for interactive , i see ata3(i think its my DVD-R/W) responding too slow. so, booting stops there till it responds.
o/p of
Code:
dmesg | grep -i ata3
gives
[
Code:
root@localhost pavan]# dmesg | grep -i ata3
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata3.01: ATAPI: LITE-ON DVDRW LH-20A1P, KL0P, max UDMA/66
ata3: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
ata3.01: limited to UDMA/33 due to 40-wire cable
ata3.01: configured for UDMA/33
ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
ata3.01: status: { DRDY }
ata3: link is slow to respond, please be patient (ready=0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.01: NODEV after polling detection
ata3.01: revalidation failed (errno=-2)
ata3: soft resetting link
ata3: nv_mode_filter: 0x701f&0x1f01f->0x701f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
ata3.01: configured for UDMA/33
ata3: EH complete
ata3.01: limiting speed to UDMA/25:PIO4
ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
ata3.01: status: { DRDY }
ata3: link is slow to respond, please be patient (ready=0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.01: NODEV after polling detection
ata3.01: revalidation failed (errno=-2)
ata3: soft resetting link
ata3: nv_mode_filter: 0x301f&0x1f01f->0x301f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
ata3.01: configured for UDMA/25
ata3: EH complete
ata3.01: limiting speed to PIO4
ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
ata3.01: status: { DRDY }
ata3: link is slow to respond, please be patient (ready=0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.01: NODEV after polling detection
ata3.01: revalidation failed (errno=-2)
ata3: soft resetting link
ata3: nv_mode_filter: 0x1f&0x1f01f->0x1f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
ata3.01: configured for PIO4
ata3: EH complete
due to this ,to get my desktop it takes 10 mins
plse help me to get out of this problem
