Hi i do not want to make a new topic.
I have a Pal TV-OUT problem.
First of all, sorry for my bad english. I started with google but I did not finde the solution, so I need some help.
hw: I have a
laptop, asus x53k fully amd chipset and cpu, with
ati2600hd gfx.
sw: Standart
Slackware 13.1 install. (kernel
2.6.33.4) I use the default
radeon driver. /usr/lib/xorg/modules/drivers/radeon_drv.so version = 6.13.0
At boot time everything is all right. I have a fine picture on the TV too. When I type startx the TV screen start scrolling, and change black and white.
I tried
Code:
xrandr --output DIN --set tv_standard pal
It fixed the color problem but the picture is stil runing.
I think the problem is the refresh rate.
Code:
xrandr --newmode "720x512@50" 23.49 720 752 840 872 512 522 527 5385
xrandr --addmode DIN "720x512@50"
xrandr --output DIN --mode 720x512@50
And adding separated screen.
Code:
xrandr --output DIN --below LVDS
It works, but still runing screen.
xrandr give:
Quote:
Screen 0: minimum 320 x 200, current 1280 x 1568, maximum 2048 x 2048
VGA-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800 59.9*+
1280x720 59.9
1152x768 59.8
1024x768 60.0 59.9
800x600 60.3 59.9
640x480 59.9 59.4
DIN connected 1024x768+0+800 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 59.9*
800x600 60.3 59.9
848x480 59.7
720x480 59.7
640x480 59.9 59.4
720x512@50 49.0
|