no, always the same
:'(
olegha:/home/olegha # modprobe saa7134 card=129
olegha:/home/olegha # dmesg | grep saa
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7134[0]: found at 0000:02:00.0, rev: 1, irq: 11, latency: 0, mmio: 0x20000000
saa7134[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,insmod option]
saa7134[0]: board init: gpio is e2c0c0
saa7134[0]: Huh, no eeprom present (err=-5)?
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]/irq[10,28546]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
saa7134[0]/irq[10,28551]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
saa7134[0]: found at 0000:02:00.0, rev: 1, irq: 11, latency: 0, mmio: 0x20000000
saa7134[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,insmod option]
saa7134[0]: board init: gpio is e2c0c0
saa7134[0]: Huh, no eeprom present (err=-5)?
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
maybe someone can understand something in these lines?
Thank you.