plz, help me (plz realy )

h4ng4m3 · 08-15-2003, 09:55 AM

here modem run well in windoz but in rh9 don't (i'm realy newbie plz help)

Quote:

08-15-2003 20:58:29.921 - File: C:\WINNT\system32\unimdm.tsp, Version 5.0.2195 - Retail
08-15-2003 20:58:29.921 - File: C:\WINNT\system32\unimdmat.dll, Version 5.0.2195 - Retail
08-15-2003 20:58:29.921 - File: C:\WINNT\system32\uniplat.dll, Version 5.0.2195 - Retail
08-15-2003 20:58:29.937 - File: C:\WINNT\system32\drivers\modem.sys, Version 5.0.2195 - Retail
08-15-2003 20:58:29.937 - File: C:\WINNT\system32\modemui.dll, Version 5.0.2195 - Retail
08-15-2003 20:58:29.937 - Modem type: NetoDragon 56K Voice Modem
08-15-2003 20:58:29.937 - Modem inf path: oem5.inf
08-15-2003 20:58:29.937 - Modem inf section: Modem1
08-15-2003 20:58:30.078 - 460800,8,N,1, ctsfl=1, rtsctl=2
08-15-2003 20:58:30.078 - Initializing modem.
08-15-2003 20:58:30.093 - Send: AT<cr>
08-15-2003 20:58:30.093 - Recv: <cr><lf>OK<cr><lf>
08-15-2003 20:58:30.093 - Interpreted response: OK
08-15-2003 20:58:30.109 - Send: AT &F E0 V1 &A3 &D2 &C1 S0=0<cr>
08-15-2003 20:58:30.109 - Recv: <cr><lf>OK<cr><lf>
08-15-2003 20:58:30.109 - Interpreted response: OK
08-15-2003 20:58:30.109 - Send: ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
08-15-2003 20:58:30.109 - Recv: <cr><lf>OK<cr><lf>
08-15-2003 20:58:30.109 - Interpreted response: OK
08-15-2003 20:58:30.109 - Waiting for a call.
08-15-2003 20:58:30.125 - Send: at#cid=1<cr>
08-15-2003 20:58:30.125 - Recv: <cr><lf>OK<cr><lf>
08-15-2003 20:58:30.125 - Interpreted response: OK
08-15-2003 20:58:30.140 - Send: ATS0=0<cr>
08-15-2003 20:58:30.140 - Recv: <cr><lf>OK<cr><lf>
08-15-2003 20:58:30.140 - Interpreted response: OK
08-15-2003 20:58:30.140 - 230400,8,N,1, ctsfl=1, rtsctl=2
08-15-2003 20:58:30.140 - Initializing modem.
08-15-2003 20:58:30.140 - Send: AT<cr>
08-15-2003 20:58:30.140 - Recv: <cr><lf>OK<cr><lf>
08-15-2003 20:58:30.140 - Interpreted response: OK
08-15-2003 20:58:30.156 - Send: AT &F E0 V1 &A3 &D2 &C1 S0=0<cr>
08-15-2003 20:58:30.156 - Recv: <cr><lf>OK<cr><lf>
08-15-2003 20:58:30.156 - Interpreted response: OK
08-15-2003 20:58:30.171 - Send: ATS7=60S19=0L1M0\N3%C3&H1N1X4<cr>
08-15-2003 20:58:30.171 - Recv: <cr><lf>OK<cr><lf>
08-15-2003 20:58:30.171 - Interpreted response: OK
08-15-2003 20:58:30.171 - Dialing.
08-15-2003 20:58:30.187 - Send: ATDT####<cr>
08-15-2003 20:58:47.468 - Recv: <cr><lf>MODULATION: V.92
08-15-2003 20:58:47.468 - Interpreted response: Informative
08-15-2003 20:58:47.468 - Recv: <cr><lf>PROTOCOL: LAPM
08-15-2003 20:58:47.468 - Interpreted response: Informative
08-15-2003 20:58:47.468 - Recv: <cr><lf>COMPRESSION: V.44
08-15-2003 20:58:47.468 - Interpreted response: Informative
08-15-2003 20:58:47.468 - Recv: <cr><lf>CONNECT 52000<cr><lf>
08-15-2003 20:58:47.468 - Interpreted response: Connect
08-15-2003 20:58:47.468 - Connection established at 52000bps.
08-15-2003 20:58:47.468 - Error-control on.
08-15-2003 20:58:47.468 - Data compression on.
08-15-2003 20:59:17.468 - Read: Total: 8254, Per/Sec: 272, Written: Total: 6844, Per/Sec: 225
08-15-2003 21:01:17.468 - Read: Total: 133389, Per/Sec: 1042, Written: Total: 65911, Per/Sec: 492

thanks thanks

sk8guitar · 08-15-2003, 09:59 AM

what is that message from? are you in linux? those are windows file addresses with dlls...

dalek · 08-15-2003, 10:07 AM

This is a winmodem or a software modem. I recommend you get a external serial modem. If you are using a laptop, good luck. You will need to find drivers for your model. Try www.google.com/linux . Put in the model and say a prayer that someone wrote drivers.

trickykid · 08-15-2003, 10:33 AM

www.linmodems.org

And in the future, use better and more helpful thread titles please. Your title doesn't explain your exact problem.

dalek · 08-15-2003, 10:43 AM

I have a 24K connection and I hate those bad titles. I usually pass them by. I did a google search to find out about the modem. It appearantly doesn't have much support from what I read.
Whoever came up with winmodems should be doomed to using windoze forever! Torture till they die.

h4ng4m3 · 08-16-2003, 12:16 AM

thanks, i realy install driver
now, how can connect (dial-up) to isp
plz help me with command (console) (plz)

thanks thanks

dalek · 08-16-2003, 12:51 AM

I don't use console much so I'm shooting in the dark. Try 'kppp' and see what it does. If you have trouble try 'man kppp'. That should help you if you need more info to run in console.

I'm not much help on this though. I use a GUI.

h4ng4m3 · 08-16-2003, 03:46 AM

thanks for reply,
i also use gui (rh9), but when dial ,
i want dial to my isp is 87723 but when i listen in phone (in pc)
it can insert x87723 (i think x is code country or other)
now how can remove x number before 87723 (plz)
many thanks

h4ng4m3 · 08-17-2003, 08:47 PM

why don't help me?

Shade · 08-17-2003, 11:56 PM

Dude, I don't understand, and many other people probably can't either.

How do you remove the "x" before 87723 in what exactly?

What *exactly* are you doing to try to log in to your ISP?

Details are crucial, my friend.

Without them, everything is a shot in the dark.

-Shade

h4ng4m3 · 08-18-2003, 06:07 AM

x is auto insert before my number phone?