Hello all,

I am currently trying to configure a Beowulf cluster and Im having a strange problem. The nodes all use PXE and TFTP to aquire the kernel from the server and then commence booting.

If the node has a keyboard/hard-drive/floppy-disk-drive plugged into it, then the system boots perfectly. However, if the node has none of these devices plugged in, then it crashes (screen goes blank, nic light goes out). When exactly the node crashes is not consistent, however it always occurs after the kernel has been transfered and before the login screen appears.

I have tried debugging the problem with no success.

I first thought that the node was trying to log the 'no keyboard error' to a local disk, for some reason. But ruled that out when I saw the problem still occured when a floppy-drive was present (with no floppy in the drive).

I have already tried several different kernels with various settings (v2.4.20-31.9, v2.4.24, v2.2.26) and the exact same problem remains. I have steped through the startup file and found nothing which should cause such an issue.

The nodes are P4 2.5 Ghz, 512 mb RAM, Intel D845GERG2 motherboards. There are 64 of them and all of them are diskless. I would rather not try to resolve this issue by 'buying 64 keyboards'.

Any help/suggestions on resolving this issue would be greatly appreacaited.

Cheers,
-Phil Smith

Login-screen ... Are they configured to run X??

If so, try the option "AllowMouseOpenFail" "true"
in the XF86Config / server flags section ...


Cheers,
Tink