Hi!
I am configuring wireless in my laptop.
I have Fedora core 5 (Kernel 2.6.15-1.2054_FC5smp i686)
and my wlan card is INTEL PRO 3945ABG
While installing ieee80211 subsystem (as intstructed in
http://ieee80211.sourceforge.net/) I am getting following errors
Code:
[root@localhost ieee80211-1.2.15]# make
Checking in /lib/modules/2.6.15-1.2054_FC5smp for ieee80211 components...
find: /lib/modules/2.6.15-1.2054_FC5smp/build/: No such file or directory
egrep: /lib/modules/2.6.15-1.2054_FC5smp/build//.config: No such file or directory
egrep: /lib/modules/2.6.15-1.2054_FC5smp/build//include/linux/autoconf.h: No such file or directory
find: /lib/modules/2.6.15-1.2054_FC5smp/build/: No such file or directory
make -C /lib/modules/2.6.15-1.2054_FC5smp/build M=/root/ieee80211-1.2.15 modules
make: *** /lib/modules/2.6.15-1.2054_FC5smp/build: No such file or directory. Stop.
make: *** [modules] Error 2
[root@localhost ieee80211-1.2.15]#
Please let me know what could be cause of above errors, and how can I rectify that.
------lspci--------------------------------
Code:
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=AHCI (rev 01)
02:06.0 CardBus bridge: Texas Instruments Unknown device 8039
02:06.2 Mass storage controller: Texas Instruments Unknown device 803b
02:06.3 Class 0805: Texas Instruments Unknown device 803c
02:06.4 Communication controller: Texas Instruments Unknown device 803d
08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21)
10:00.0 Network controller: Intel Corporation Unknown device 4222 (rev 02)
[root@localhost ieee80211-1.2.15]#
IF lsmod is also needed, please ask for that.
After installing this subsystem I will install the INTEL PRO 3945ABG
driver and then configure it.
Thanks in advance