I've installed nvidia driver(Andrew E. Schulman's website) and after that I'm having a problem. After couple of reboots I get 3 errors sayin' that WindowList, ShowDesktopButton and WorkspaceSwitcher stopped unexpectedly do you want to restart these desklets(on GNOME)? So I had to restart these desklets. But the problem doesn't go away. I'm using Debian Sarge 31r2, kernel 2.6.8-2-386 and NVIDIA geforce3 Ti200 video card. Any help will be gladly appreciated. Also I searched the web with these keywords:
WindowList ShowDesktop WorkspaceSwitcher stopped unexpectedly debian
WindowList ShowDesktop WorkspaceSwitcher crashes nvidia debian
gnome applets stopped nvidia debian
gnome applets crashes nvidia debian
.....
But no luck(maybe because I'm not using the right word). I also searched forums but I couldn't find anything similar to my problems.
--AD
I took following steps for installing nvidia driver:
1) Changed /etc/apt/sources.list to:
deb
http://http.us.debian.org/debian stable main contrib non-free
2)apt-get install module-assistant nvidia-kernel-common
m-a prepare
m-a auto-install nvidia
3)apt-get -t stable install nvidia-glx
4) cp -p /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.bak
md5sum /etc/X11/XF86Config-4 >| /var/lib/xfree86/XF86Config-4.md5sum
dpkg-reconfigure xserver-xfree86
5)addgroup --system video
adduser $USER video
6) grep -q ^nvidia /etc/modules || echo nvidia >> /etc/modules
Output of XFree86.0.log:
Quote:
.......
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xC8000000
(--) NVIDIA(0): MMIO registers at 0xCE000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce3 Ti 200
(--) NVIDIA(0): VideoBIOS: 03.20.00.18.14
(--) NVIDIA(0): Interlaced video modes are not supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(WW) NVIDIA(0): Failure reading EDID parameters for display device CRT-0
(II) NVIDIA(0): Generic Monitor: Using hsync range of 30.00-65.00 kHz
(II) NVIDIA(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
.......
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
....
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xcdc80000 - 0xcdcfffff (0x80000) MX[B]
[1] 0 0 0xc8000000 - 0xcbffffff (0x4000000) MX[B]
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing extension GLX
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
GetModeLine - scrn: 0 clock: 108000
........
(II) NVIDIA(0): Setting mode "1280x1024"
SwitchToMode - Succeeded
|