LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices



Reply
 
Search this Thread
Old 10-04-2009, 05:31 PM   #16
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Original Poster
Rep: Reputation: 196Reputation: 196

Quote:
Originally Posted by onebuck View Post
In your previous post of the '/var/log/Xorg.0.log' you don't seem to have 'dri' dis-enabled.
You’re perceptive. I overlooked it. Now I tested it throughoutly...

1. First test:

Code:
Section "Module"
        Load  "glx"
        Load  "extmod"
        Load  "dri2"
        Load  "dbe"
        Load  "dri"
EndSection
Code:
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
(II) Loading extension DRI2
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): [DRI] installation complete
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
2. Second test:

Code:
Section "Module"
        Load  "glx"
        Load  "extmod"
        Disable  "dri2"
        Load  "dbe"
        Disable  "dri"
EndSection
Code:
(WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
(WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "dri" will be loaded even though the default is to disable it.
(II) "dri2" will be loaded even though the default is to disable it.
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed (libdri too old)
[dri] Disabling DRI.
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
3. Third test:

Code:
Section "Module"
        Load  "extmod"
        SubSection "extmod"
            Option  "omit xfree86-dga"
        EndSubSection
        Load  "glx"
        Load  "extmod"
        Disable  "dri2"
        Load  "dbe"
        Disable  "dri"
EndSection
Code:
(WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
(WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "dri" will be loaded even though the default is to disable it.
(II) "dri2" will be loaded even though the default is to disable it.
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed (libdri too old)
[dri] Disabling DRI.
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
4. Fourth test:

Code:
Section "Module"
        Load  "glx"
        Load  "extmod"
        Disable  "dri2"
        Load  "dbe"
        Load  "dri"
EndSection
Code:
(WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded even though the default is to disable it.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
(II) Loading extension XFree86-DRI
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): [DRI] installation complete
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
5. Fifth test:

Code:
Section "Module"
        Load  "glx"
        Load  "extmod"
        Load  "dri2"
        Load  "dbe"
        Disable  "dri"
EndSection
Code:
(WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "dri" will be loaded even though the default is to disable it.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
(II) Loading extension DRI2
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed (libdri too old)
[dri] Disabling DRI.
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
As you see the second test (with disabled DRI and DRI2) and the third test (with additionally omitted xfree86-dga) give exactly the same result. My machine hangs up when DRI is loaded (the first and the fourth tests). When DRI is disabled (the second, the third and the fifth tests) machine works flawlessly but MPlayer is unable to scale movies and Xine scales them without anti aliasing.
 
Old 10-04-2009, 08:25 PM   #17
BrZ
Member
 
Registered: Apr 2009
Distribution: Slackware
Posts: 505

Rep: Reputation: 84
What are you trying to do? ati-6.12.4?
 
Old 10-04-2009, 10:59 PM   #18
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Original Poster
Rep: Reputation: 196Reputation: 196
That's right. I try xf86-video-ati-6.12.4. With DRI enabled the system hangs up when I use Window Maker with some dockable applications simultaneously on two accounts. With former xf86-video-ati results was even worse (the system hanged up more frequently).
 
Old 10-05-2009, 03:45 AM   #19
tramni1980
Member
 
Registered: Jul 2006
Location: Tübingen, Germany
Distribution: Slackware64-13.37
Posts: 737

Rep: Reputation: 37
I also had exactly the same issue as you all describe: random hangs with keyboard locked. In my case the solution was to disable hald polling my cdrom /dev/hda every 2 seconds.
 
Old 10-05-2009, 11:07 AM   #20
BrZ
Member
 
Registered: Apr 2009
Distribution: Slackware
Posts: 505

Rep: Reputation: 84
I pushed my system with ati-6.12.4 and mesa-7.5.2. Mesa 7.5.1 (current) and ati-6.12.2 sould work until you build your new driver. I'm at work now and out of Slack =[

I saw your script and are in doubt if x sources are needed to build the driver (or mesa?). Mine is slightly different.

Last edited by BrZ; 10-05-2009 at 05:59 PM.
 
Old 10-05-2009, 12:17 PM   #21
BrZ
Member
 
Registered: Apr 2009
Distribution: Slackware
Posts: 505

Rep: Reputation: 84
To build the driver standalone you are missing something like 'xserver_source="/tmp/x-files/xorg-server-1.6.3"' and '--with-xserver-source=${xserver_source} \', where 'x-files' is your environment to to build x and the sources are decompressed inside. Please check CFLAGS and CXXFLAGS.

Are you shure '--with-wx-config' is needed?
 
Old 10-05-2009, 05:04 PM   #22
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Original Poster
Rep: Reputation: 196Reputation: 196
Thank you for the suggestions. Former SlackBuild for xf86-video-ati driver was sloppy. I updated it and added SlackBuilds for xorg-server and mesa. All SlackBuilds are accessible here.
 
Old 10-05-2009, 06:24 PM   #23
BrZ
Member
 
Registered: Apr 2009
Distribution: Slackware
Posts: 505

Rep: Reputation: 84
Instal mesa-7.5.1 from current or wait 7.5.2 and revert to ati-6.12.2. Start a fresh build. Maybe you'll need to update some some other libs too. Try to keep the variables from Slackware and you will assure at least compatibility... And don't mess wiss xorg-server =]
 
Old 10-05-2009, 08:01 PM   #24
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Original Poster
Rep: Reputation: 196Reputation: 196
In post #20 you suggested to switch to ati driver 6.12.4 and mesa 7.5.2. In post #21 you suggested to include xorg-server during ati driver compilation. In post #23 you suggest to not to use mesa 7.5.2, to revert to ati 6.12.2 and to not to mess with xorg-server.

I'm trying different driver's versions because I hope the new driver will work better in my system. I have real problem and I try different solutions. Before I changed the driver only. After your suggestions I compile it including xorg-server. I test it with different versions of mesa. I do it following your suggestions.
 
Old 10-05-2009, 09:01 PM   #25
BrZ
Member
 
Registered: Apr 2009
Distribution: Slackware
Posts: 505

Rep: Reputation: 84
Sorry, maybe I wasn't clear enought. I tried to say that it is possible to accomplish you goal.

You needed only the xorg-server source, decompressed. You don't need to rebuild xorg-server, but the driver need the xorg source to implement some functions.

I built by hand mesa-7.5.2, a bugfix for 7.5.1. Mesa 7.5.1 was officially shipped for test by Slackware and maybe soon mesa 7.5.2 will hit current (or not).

So, if you try mesa-7.5.1 and keep ati-6.12.2, all of them built 'for' and 'by' Slackware, you should be playing on the safe side.

Relax, I just tried to help as was messing with almost the same things =]

Mesa-7.5.2
libdrm-2.4.14
xf86-video-ati-6.12.4
xf86driproto-2.1.0
 
Old 10-05-2009, 10:21 PM   #26
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Original Poster
Rep: Reputation: 196Reputation: 196
As I wrote in the complementary thread (messages #9, #21 and #23) I tried different combinations of drivers and libraries. Unfortunately any of them helped me to get rid of the system hang ups.

Two weeks ago the situation was clear. Newest ATI driver worked significantly better than older versions. I decided to wait a while before I'll submit the bug. Now I repeated the tests and the situation is ambivalent. The system works slightly better with new ATI driver or new Mesa but the difference isn't so distinct.
 
Old 10-10-2009, 12:33 PM   #27
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Original Poster
Rep: Reputation: 196Reputation: 196
It seems I finally solved the problem of random system hang ups. I found the solution thanks to that thread: Radeon kms works! by dolphin77.

I used two scripts by dolphin77 to download and build xf86-video-ati driver from GIT...

First script downloads sources and builds source package:

get-xf86-video-ati
Code:
rm -rf xf86-video-ati
git clone git://cgit.freedesktop.org/git/xorg/driver/xf86-video-ati
cd xf86-video-ati
git checkout -t -b master origin/master
cd ..
# package the source archive and clean up:
( cd xf86-video-ati ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
DATE=$(date +%Y%m%d)
mv xf86-video-ati xf86-video-ati-${DATE}_git
tar cjf xf86-video-ati-${DATE}_git.tar.bz2 xf86-video-ati-${DATE}_git
rm -rf xf86-video-ati-${DATE}_git
Second script builds the package:

xf86-video-ati.SlackBuild
Code:
PKGNAM=xf86-video-ati
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-i486}
BUILD=${BUILD:-1}

# Be sure this list is up-to-date:

NUMJOBS=${NUMJOBS:--j8}
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-xf86-video-ati

if [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi

rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP
rm -rf xf86-video-ati-${VERSION}
tar xvf $CWD/xf86-video-ati-${VERSION}.tar.bz2 || exit 1
cd xf86-video-ati-$VERSION

# Make sure ownerships and permissions are sane:
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;

./autogen.sh

CFLAGS="$SLKCFLAGS" \
./configure \
--prefix=/usr \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--sysconfdir=/etc \
--mandir=/usr/man \
--build=$ARCH-slackware-linux

# Nobody else is enabling this. Seems like it's asking for trouble.
# --enable-xcb

make $NUMJOBS
make install DESTDIR=$PKG

mkdir -p $PKG/usr/doc/xf86-video-ati-$VERSION/html
cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/xf86-video-ati-$VERSION
rm -f docs/relnotes*.html docs/RELNOTES*
cp -a docs/*.html $PKG/usr/doc/xf86-video-ati-$VERSION/html

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz $CWD
After upgrade to xf86-video-ati-20091010_git-i486-1 I was unable to hang up the system using the procedures described here.

I used that newest driver with default 2.6.29.6 generic smp kernel, default mesa 7.5 (build 2) and default xorg-server 1.6.3.

***

I wrote about it also in that fork thread.

***

[EDIT]
In post #33 I describe simpler method of avoid random system hang ups.
[/EDIT]

Last edited by w1k0; 10-11-2009 at 10:21 AM.
 
Old 10-10-2009, 01:26 PM   #28
onebuck
Moderator
 
Registered: Jan 2005
Location: Midwest USA, Central Illinois
Distribution: Slackware®
Posts: 11,451
Blog Entries: 4

Rep: Reputation: 1505Reputation: 1505Reputation: 1505Reputation: 1505Reputation: 1505Reputation: 1505Reputation: 1505Reputation: 1505Reputation: 1505Reputation: 1505Reputation: 1505
Hi,

I'm curious about your '/var/Xorg.0.log' after the changes now. I would appreciate it if you would post the modules portion along with the loads informational (II). What about 'dri', any warnings or errors as before?
 
Old 10-10-2009, 03:06 PM   #29
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Original Poster
Rep: Reputation: 196Reputation: 196
Xorg.0.log with xf86-video-ati-6.12.2-i486-2:

Code:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux home6 2.6.29.6-custom-smp #1 SMP Sat Aug 29 20:15:05 CEST 2009 i686
Build Date: 03 August 2009  06:51:50PM
 
.
.
.
(II) Loader magic: 0x1de0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 5.0
        X.Org XInput driver : 4.0
        X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 1002:7149:17aa:2005 rev 0, Mem @ 0xd8000000/134217728, 0xee100000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
        Section "Device"
                Identifier      "Builtin Default ati Device 0"
                Driver  "ati"
        EndSection
        Section "Screen"
                Identifier      "Builtin Default ati Screen 0"
                Device  "Builtin Default ati Device 0"
        EndSection
        Section "Device"
                Identifier      "Builtin Default vesa Device 0"
                Driver  "vesa"
        EndSection
        Section "Screen"
                Identifier      "Builtin Default vesa Screen 0"
                Device  "Builtin Default vesa Device 0"
        EndSection
        Section "Device"
                Identifier      "Builtin Default fbdev Device 0"
                Driver  "fbdev"
        EndSection
        Section "Screen"
                Identifier      "Builtin Default fbdev Screen 0"
                Device  "Builtin Default fbdev Device 0"
        EndSection
        Section "ServerLayout"
                Identifier      "Builtin Default Layout"
                Screen  "Builtin Default ati Screen 0"
                Screen  "Builtin Default vesa Screen 0"
                Screen  "Builtin Default fbdev Screen 0"
        EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
.
.
.
        Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
        Entry deleted from font path.
(==) FontPath set to:
.
.
.
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
        If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 6.12.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 6.12.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 2.2.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
.
.
.
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
        [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000ee100000
(II) RADEON(0): MMIO registers at 0x00000000ee100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
        "Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 0.1.0
        ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1300" (ChipID = 0x7149)
(WW) RADEON(0): R500 support is under development. Please report any issues to xorg-driver-ati@lists.x.org
(--) RADEON(0): Linear framebuffer at 0x00000000d8000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
        SubsystemVendorID: 0x17aa SubsystemID: 0x2006
        IOBaseAddress: 0x2000
        Filename: BR25482.bin 
        BIOS Bootup Message: 
M64CSP/M62CSP/M54CSP/M52CSP BIOS                             !              

(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x3ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x3ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 425000
(II) RADEON(0): Default Memory Clock: 352000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 425.000000, mclk: 352.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1024, YRes: 768, DotClock: 65000
HBlank: 320, HOverPlus: 24, HSyncWidth: 136
VBlank: 38, VOverPlus: 3, VSyncWidth: 6
encoder: 0x15
encoder: 0xf
encoder: 0x13
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_KLDSCP_DAC1
  DDC reg: 0x7e40
(II) RADEON(0): Port1:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVTM1
  DDC reg: 0x7e60
(II) RADEON(0): Port2:
  XRANDR name: DVI-0
  Connector: DVI-I
  DFP1: INTERNAL_KLDSCP_TMDS1
  DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LEN  Model: 4040  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 31  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.342   greenX: 0.319 greenY: 0.540
(II) RADEON(0): blueX: 0.152 blueY: 0.137   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 54.2 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  LTN150XG-L08
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):         00ffffffffffff0030ae404000000000
(II) RADEON(0):         000f0103801f1778ea2d059757518a27
(II) RADEON(0):         23505421080001010101010101010101
(II) RADEON(0):         01010101010164190040410026301888
(II) RADEON(0):         360030e4100000192815004041002630
(II) RADEON(0):         1888360030e4100000190000000f0061
(II) RADEON(0):         43326143281401004ca35847000000fe
(II) RADEON(0):         004c544e31353058472d4c30380a006d
finished output detect: 1
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LEN  Model: 4040  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 31  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.342   greenX: 0.319 greenY: 0.540
(II) RADEON(0): blueX: 0.152 blueY: 0.137   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 54.2 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  LTN150XG-L08
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):         00ffffffffffff0030ae404000000000
(II) RADEON(0):         000f0103801f1778ea2d059757518a27
(II) RADEON(0):         23505421080001010101010101010101
(II) RADEON(0):         01010101010164190040410026301888
(II) RADEON(0):         360030e4100000192815004041002630
(II) RADEON(0):         1888360030e4100000190000000f0061
(II) RADEON(0):         43326143281401004ca35847000000fe
(II) RADEON(0):         004c544e31353058472d4c30380a006d
(II) RADEON(0): EDID vendor "LEN", prod id 16448
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.2.1
        ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
        of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
        [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
        [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
        [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
        [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit d8000000 0 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x04000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
(II) RADEON(0): Largest offscreen area available: 1024 x 7165
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1100000
(II) RADEON(0): Will use depth buffer at offset 0x1500000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x3ff8000
(II) RADEON(0): Will use 39936 kb for textures at offset 0x1900000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf9414000
(II) RADEON(0): [pci] ring handle = 0xf9414000
(II) RADEON(0): [pci] Ring mapped at 0xb35e0000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf9515000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb7ecb000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9516000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xb33e0000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf9716000
(II) RADEON(0): [pci] GART Texture map mapped at 0xb1760000
(II) RADEON(0): [drm] register handle = 0x2dc20000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xdbffd800 is: 0xdbffd800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Scanline Image Writes
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
(II) RADEON(0): Largest offscreen area available: 1024 x 7157
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Mode 1024x768 - 1344 806 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
freq: 65000000
best_freq: 65000000
best_feedback_div: 260
best_ref_div: 9
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
(II) RADEON(0): crtc(0) PLL  : refdiv 9, fbdiv 0x104(260), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Enable CRTC 0 success
Unblank CRTC 0 success
Output LCD1 enable success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 304 x 228
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 2.2.5
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "pl"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
.
.
.
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) Option "Emulate3Buttons" "true"
(II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation on.
(**) Option "EmulateWheel" "true"
(**) Option "EmulateWheelButton" "2"
(**) Option "EmulateWheelTimeout" "200"
(**) Option "YAxisMapping" "4 5"
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) Option "XAxisMapping" "6 7"
(**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) TPPS/2 IBM TrackPoint: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.1.3
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
.
.
.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "pl"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "pl"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
 
Old 10-10-2009, 03:07 PM   #30
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Original Poster
Rep: Reputation: 196Reputation: 196
Xorg.0.log with xf86-video-ati-20091010_git-i486-1:

Code:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux home6 2.6.29.6-custom-smp #1 SMP Sat Aug 29 20:15:05 CEST 2009 i686
Build Date: 03 August 2009  06:51:50PM
 
.
.
.
(II) Loader magic: 0x1de0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 5.0
        X.Org XInput driver : 4.0
        X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 1002:7149:17aa:2005 rev 0, Mem @ 0xd8000000/134217728, 0xee100000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
        Section "Device"
                Identifier      "Builtin Default ati Device 0"
                Driver  "ati"
        EndSection
        Section "Screen"
                Identifier      "Builtin Default ati Screen 0"
                Device  "Builtin Default ati Device 0"
        EndSection
        Section "Device"
                Identifier      "Builtin Default vesa Device 0"
                Driver  "vesa"
        EndSection
        Section "Screen"
                Identifier      "Builtin Default vesa Screen 0"
                Device  "Builtin Default vesa Device 0"
        EndSection
        Section "Device"
                Identifier      "Builtin Default fbdev Device 0"
                Driver  "fbdev"
        EndSection
        Section "Screen"
                Identifier      "Builtin Default fbdev Screen 0"
                Device  "Builtin Default fbdev Device 0"
        EndSection
        Section "ServerLayout"
                Identifier      "Builtin Default Layout"
                Screen  "Builtin Default ati Screen 0"
                Screen  "Builtin Default vesa Screen 0"
                Screen  "Builtin Default fbdev Screen 0"
        EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
.
.
.
        Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
        Entry deleted from font path.
(==) FontPath set to:
.
.
.
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
        If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 6.12.99
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 6.12.99
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 2.2.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
.
.
.
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
        [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000ee100000
(II) RADEON(0): MMIO registers at 0x00000000ee100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
        "Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 0.1.0
        ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1300" (ChipID = 0x7149)
(--) RADEON(0): Linear framebuffer at 0x00000000d8000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
        SubsystemVendorID: 0x17aa SubsystemID: 0x2006
        IOBaseAddress: 0x2000
        Filename: BR25482.bin 
        BIOS Bootup Message: 
M64CSP/M62CSP/M54CSP/M52CSP BIOS                             !              

(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x3ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x3ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 425000
(II) RADEON(0): Default Memory Clock: 352000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 425.000000, mclk: 352.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1024, YRes: 768, DotClock: 65000
HBlank: 320, HOverPlus: 24, HSyncWidth: 136
VBlank: 38, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_KLDSCP_DAC1
  DDC reg: 0x7e40
(II) RADEON(0): Port1:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVTM1
  DDC reg: 0x7e60
(II) RADEON(0): Port2:
  XRANDR name: DVI-0
  Connector: DVI-I
  DFP1: INTERNAL_KLDSCP_TMDS1
  DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LEN  Model: 4040  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 31  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.342   greenX: 0.319 greenY: 0.540
(II) RADEON(0): blueX: 0.152 blueY: 0.137   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 54.2 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  LTN150XG-L08
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):         00ffffffffffff0030ae404000000000
(II) RADEON(0):         000f0103801f1778ea2d059757518a27
(II) RADEON(0):         23505421080001010101010101010101
(II) RADEON(0):         01010101010164190040410026301888
(II) RADEON(0):         360030e4100000192815004041002630
(II) RADEON(0):         1888360030e4100000190000000f0061
(II) RADEON(0):         43326143281401004ca35847000000fe
(II) RADEON(0):         004c544e31353058472d4c30380a006d
finished output detect: 1
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LEN  Model: 4040  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 31  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.342   greenX: 0.319 greenY: 0.540
(II) RADEON(0): blueX: 0.152 blueY: 0.137   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 54.2 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  LTN150XG-L08
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):         00ffffffffffff0030ae404000000000
(II) RADEON(0):         000f0103801f1778ea2d059757518a27
(II) RADEON(0):         23505421080001010101010101010101
(II) RADEON(0):         01010101010164190040410026301888
(II) RADEON(0):         360030e4100000192815004041002630
(II) RADEON(0):         1888360030e4100000190000000f0061
(II) RADEON(0):         43326143281401004ca35847000000fe
(II) RADEON(0):         004c544e31353058472d4c30380a006d
(II) RADEON(0): EDID vendor "LEN", prod id 16448
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 2.4.0
        ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
        [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEON(0): RADEONScreenInit d8000000 0 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x04000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 65504 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00400000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00404000
(II) RADEON(0): Will use 4096 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 32 kb for PCI GART at offset 0x03ff8000
(II) RADEON(0): Will use 4096 kb for back buffer at offset 0x00408000
(II) RADEON(0): Will use 4096 kb for depth buffer at offset 0x00808000
(II) RADEON(0): Will use 26368 kb for textures at offset 0x00c08000
(II) RADEON(0): Will use 26816 kb for X Server offscreen at offset 0x025c8000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf9414000
(II) RADEON(0): [pci] ring handle = 0xf9414000
(II) RADEON(0): [pci] Ring mapped at 0xb37ee000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf9515000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb80b9000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9516000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xb35ee000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf9716000
(II) RADEON(0): [pci] GART Texture map mapped at 0xb196e000
(II) RADEON(0): [drm] register handle = 0x2dc20000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xdbffd800 is: 0xdbffd800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): num quad-pipes is 1
(II) EXA(0): Offscreen pixmap area of 27459584 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1024x768 - 1344 806 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
freq: 65000000
best_freq: 65000000
best_feedback_div: 260
best_frac_feedback_div: 0
best_ref_div: 9
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 65000, PLL 65000
(II) RADEON(0): crtc(0) PLL  : refdiv 9, fbdiv 0x104(260), fracfbdiv 0, pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Output LCD1 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 304 x 228
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 2.2.5
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "pl"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
.
.
.
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) Option "Emulate3Buttons" "true"
(II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation on.
(**) Option "EmulateWheel" "true"
(**) Option "EmulateWheelButton" "2"
(**) Option "EmulateWheelTimeout" "200"
(**) Option "YAxisMapping" "4 5"
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) Option "XAxisMapping" "6 7"
(**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) TPPS/2 IBM TrackPoint: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 1.1.3
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
.
.
.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "pl"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "pl"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hang ups!! cactusface Linux - Newbie 2 07-11-2007 03:11 PM
Slackware hang ups little_ball Slackware 9 06-03-2005 12:54 PM
HELP! Q3 ( quake 3 ) random lock-ups... FatButtLarry Linux - Games 3 10-27-2004 07:44 PM
Random System Reboot/Hang banerji Linux - Hardware 1 03-22-2004 04:21 PM
Random Lock ups syphr1ogic Linux - General 2 10-01-2003 03:54 PM


All times are GMT -5. The time now is 12:19 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration