amaroK Kaffeine don't answer

hi all,

I'm a complete newbe in linux. I've installed that system two weeks ago and I've got the following problem:

When use some application after some time they hang on (stop working) and I can make them working any more until reset. These are:
amaroK (after a few songs)
Kaffeine (after a few seconds of film)
Web browsers (after a few minutes)

After they hang on system still works, but these application not any more.

my computer is HP pavilion zv5200 (notebook), with graphics nVIDIA GeForce 4 320, and sound also nVIDIA.

I have a Mandrakelinux 10.1 I installed from 3CD version fully automaticly (hardware auto-detect, had some problems with recognising sound device)

I don't know if it's important, but always when I close Linux the screen becomes unreadable (goes crazy), but system closes properly. I think the graphics drivers are not fully compatible with the device.


I'll be gratefull for help

Start them in a console and post any errors that get printed on your screen.

I've started amarok and kaffeiene from the console under kde and gnome, every time they freezed, but not always I got an error message. In the following post I paste what happened

Running amaroK/KDE:


[dawid@localhost mp3]$ amarok -play
amarok: [PluginManager] Plugin trader constraint: [X-KDE-amaroK-framework-version] == 3 and [X-KDE-amaroK-plugintype] == 'engine' and [X-KDE-amaroK-name] == 'void-engine' and [X-KDE-amaroK-rank] > 0
amarok: [PluginManager] Trying to load: libamarok_void-engine_plugin
amarok:
amarok: PluginManager Service Info:
amarok: ---------------------------
amarok: name : <no engine>
amarok: library : libamarok_void-engine_plugin
amarok: desktopEntryPath : amarok_void-engine_plugin.desktop
amarok: X-KDE-amaroK-plugintype : engine
amarok: X-KDE-amaroK-name : void-engine
amarok: X-KDE-amaroK-authors : (Max Howell,Mark Kretschmann)
amarok: X-KDE-amaroK-rank : 1
amarok: X-KDE-amaroK-version : 1
amarok: X-KDE-amaroK-framework-version: 3
amarok:
QMetaObject::findSignal:CollectionView: Conflict with QListView::doubleClicked(QListViewItem*,const QPoint&,int)
amarok: ERROR: [bool CollectionDB::execSql(const QString&, QStringList*, QStringList*, bool)] [CollectionDB] sqlite3_compile error:
amarok: ERROR: near ".": syntax error
amarok: ERROR: on query: SELECT DISTINCT .name, '0' FROM tags, WHERE .id=tags. ORDER BY lower(.name) DESC;
QMetaObject::findSignal:KListView: Conflict with QListView::doubleClicked(QListViewItem*,const QPoint&,int)
amarok: [PluginManager] Plugin trader constraint: [X-KDE-amaroK-framework-version] == 3 and [X-KDE-amaroK-plugintype] == 'engine' and [X-KDE-amaroK-name] == 'arts-engine' and [X-KDE-amaroK-rank] > 0
amarok: [PluginManager] Trying to load: libamarok_artsengine_plugin
amarok:
amarok: PluginManager Service Info:
amarok: ---------------------------
amarok: name : aRts Engine
amarok: library : libamarok_artsengine_plugin
amarok: desktopEntryPath : amarok_artsengine_plugin.desktop
amarok: X-KDE-amaroK-plugintype : engine
amarok: X-KDE-amaroK-name : arts-engine
amarok: X-KDE-amaroK-authors : (Mark Kretschmann)
amarok: X-KDE-amaroK-rank : 200
amarok: X-KDE-amaroK-version : 1
amarok: X-KDE-amaroK-framework-version: 3
amarok:
amarok: [PluginManager] Unloading library: libamarok_void-engine_plugin


ERROR:

[dawid@localhost mp3]$ QColor::setRgb: RGB parameter(s) out of range
QColor::setRgb: RGB parameter(s) out of range
QColor::setRgb: RGB parameter(s) out of range

Kaffeine/KDE:


[dawid@localhost Elephant - DE - SVCD]$ kaffeine -p 'Elephant - CD1v2.mpg'
XInitThreads()
kaffeine: Starting Kaffeine 0.4.3b...
kaffeine: http://kaffeine.sourceforge.net
kaffeine: Init fullscreen panel
kaffeine: Display aspect ratio (v/h): 1.00068
kaffeine: Using xine version 1-rc5
kaffeine: WARNING: No config file found, will create one...
kaffeine: Post-init xine engine
kaffeine: Use audio driver auto
kaffeine: Use video driver auto
kaffeine: Init video driver
kaffeine: Init audio driver
kaffeine: xine init successful
kaffeine: Start event loop...
kaffeine: Create System Tray
kaffeine: Set software amplification level: 140
kaffeine: New visualization plugin: goom
kaffeine: Create Postprocessing Filter: tvtime
kaffeine: Parameter: method
kaffeine: Parameter: enabled
kaffeine: Parameter: pulldown
kaffeine: Parameter: framerate_mode
kaffeine: Parameter: judder_correction
kaffeine: Parameter: use_progressive_frame_flag
kaffeine: Parameter: chroma_filter
kaffeine: Parameter: cheap_mode
kaffeine: PostFilter: Get input 'video'
kaffeine: PostFilter: Get output
kaffeine: PostFilter: SetConfig tvtime:method=LinearBlend,enabled=1,pulldown=none,framerate_mode=half_top,judder_correction=0,use_pr ogressive_frame_flag=1,chroma_filter=0,cheap_mode=1
kaffeine: PostFilter: tvtime Apply integer value 1 on offset 4
kaffeine: PostFilter: tvtime Apply integer value 0 on offset 16
kaffeine: PostFilter: tvtime Apply integer value 0 on offset 16
kaffeine: PostFilter: tvtime Apply integer value 1 on offset 20
kaffeine: PostFilter: tvtime Apply integer value 0 on offset 24
kaffeine: PostFilter: tvtime Apply integer value 1 on offset 28
kaffeine: PostFilter: tvtime Apply integer value 1 on offset 28
kaffeine: Deinterlace enabled: true
kaffeine: PostFilter: Get output
kaffeine: PostFilter: Get input 'video'
[dawid@localhost Elephant - DE - SVCD]$ kaffeine: Playing: /mnt/windows/Dokumente und Einstellungen/Dawid/Eigene Dateien/Eigene Videos/Elephant - DE - SVCD/Elephant - CD1v2.mpg
kaffeine: xine event: channels changed

after 7 seconds kaffeiene freezed without any error message

kaffeine/GNOME:


[dawid@localhost Eigene Videos]$ XInitThreads()
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
kbuildsycoca running...
kaffeine: Starting Kaffeine 0.4.3b...
kaffeine: http://kaffeine.sourceforge.net
kaffeine: Init fullscreen panel
kaffeine: Display aspect ratio (v/h): 1.00068
kaffeine: Using xine version 1-rc5
kaffeine: WARNING: No config file found, will create one...
kaffeine: Post-init xine engine
kaffeine: Use audio driver auto
kaffeine: Use video driver auto
kaffeine: Init video driver
kaffeine: Init audio driver
kaffeine: xine init successful
kaffeine: Start event loop...
kaffeine: Create System Tray
kaffeine: Set software amplification level: 140
kaffeine: New visualization plugin: goom
kaffeine: Create Postprocessing Filter: tvtime
kaffeine: Parameter: method
kaffeine: Parameter: enabled
kaffeine: Parameter: pulldown
kaffeine: Parameter: framerate_mode
kaffeine: Parameter: judder_correction
kaffeine: Parameter: use_progressive_frame_flag
kaffeine: Parameter: chroma_filter
kaffeine: Parameter: cheap_mode
kaffeine: PostFilter: Get input 'video'
kaffeine: PostFilter: Get output
kaffeine: PostFilter: SetConfig tvtime:method=LinearBlend,enabled=1,pulldown=none,framerate_mode=half_top,judder_correction=0,use_pr ogressive_frame_flag=1,chroma_filter=0,cheap_mode=1
kaffeine: PostFilter: tvtime Apply integer value 1 on offset 4
kaffeine: PostFilter: tvtime Apply integer value 0 on offset 16
kaffeine: PostFilter: tvtime Apply integer value 0 on offset 16
kaffeine: PostFilter: tvtime Apply integer value 1 on offset 20
kaffeine: PostFilter: tvtime Apply integer value 0 on offset 24
kaffeine: PostFilter: tvtime Apply integer value 1 on offset 28
kaffeine: PostFilter: tvtime Apply integer value 1 on offset 28
kaffeine: Deinterlace enabled: true
kaffeine: PostFilter: Get output
kaffeine: PostFilter: Get input 'video'
kaffeine: Load Playlist
kaffeine: xine event: playback finished

then...

[dawid@localhost Elephant - DE - SVCD]$ kaffeine -p 'Elephant - CD1v2.mpg'
XInitThreads()
kaffeine: Send URLs to running instance...
kaffeine: Playing: /mnt/windows/Dokumente und Einstellungen/Dawid/Eigene Dateien/Eigene Videos/Elephant - DE - SVCD/Elephant - CD1v2.mpg
kaffeine: xine event: channels changed

now kaffeine plays 7 seconds and then freeze, only thing that helps is kill [pid]

and then I get:

[dawid@localhost Elephant - DE - SVCD]$ X Error: BadWindow (invalid Window parameter) 3
Major opcode: 7
Minor opcode: 0
Resource id: 0x320018c
Mutex destroy failure: Device or resource busy
ICE default IO error handler doing an exit(), pid = 6272, errno = 0
X Error: BadWindow (invalid Window parameter) 3
bash: syntax error near unexpected token `('
[dawid@localhost Elephant - DE - SVCD]$ Major opcode: 7
bash: Major: command not found
[dawid@localhost Elephant - DE - SVCD]$ Minor opcode: 0
bash: Minor: command not found
[dawid@localhost Elephant - DE - SVCD]$ Resource id: 0x320018c
bash: Resource: command not found
[dawid@localhost Elephant - DE - SVCD]$ Mutex destroy failure: Device or resource busy
bash: Mutex: command not found
[dawid@localhost Elephant - DE - SVCD]$ ICE default IO error handler doing an exit(), pid = 6272, errno = 0
bash: syntax error near unexpected token `('

amarok/GNOME:


[dawid@localhost mp3]$ amarok -p
[amaroK loader] connecting to /home/dawid/.kde/socket-localhost/amarok.loader_so cket
[amaroK loader] amaroK not running. Trying to start it..
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
kbuildsycoca running...
amarok: [PluginManager] Plugin trader constraint: [X-KDE-amaroK-framework-versio n] == 3 and [X-KDE-amaroK-plugintype] == 'engine' and [X-KDE-amaroK-name] == 'vo id-engine' and [X-KDE-amaroK-rank] > 0
amarok: [PluginManager] Trying to load: libamarok_void-engine_plugin
amarok:
amarok: PluginManager Service Info:
amarok: ---------------------------
amarok: name : <no engine>
amarok: library : libamarok_void-engine_plugin
amarok: desktopEntryPath : amarok_void-engine_plugin.desktop
amarok: X-KDE-amaroK-plugintype : engine
amarok: X-KDE-amaroK-name : void-engine
amarok: X-KDE-amaroK-authors : (Max Howell,Mark Kretschmann)
amarok: X-KDE-amaroK-rank : 1
amarok: X-KDE-amaroK-version : 1
amarok: X-KDE-amaroK-framework-version: 3
amarok:
QMetaObject::findSignal:CollectionView: Conflict with QListView::doubleClicked(Q ListViewItem*,const QPoint&,int)
amarok: ERROR: [bool CollectionDB::execSql(const QString&, QStringList*, QString List*, bool)] [CollectionDB] sqlite3_compile error:
amarok: ERROR: near ".": syntax error
amarok: ERROR: on query: SELECT DISTINCT .name, '0' FROM tags, WHERE .id=tags. ORDER BY lower(.name) DESC;
QMetaObject::findSignal:KListView: Conflict with QListView::doubleClicked(QListV iewItem*,const QPoint&,int)
amarok: [PluginManager] Plugin trader constraint: [X-KDE-amaroK-framework-versio n] == 3 and [X-KDE-amaroK-plugintype] == 'engine' and [X-KDE-amaroK-name] == 'ar ts-engine' and [X-KDE-amaroK-rank] > 0
amarok: [PluginManager] Trying to load: libamarok_artsengine_plugin
amarok:
amarok: PluginManager Service Info:
amarok: ---------------------------
amarok: name : aRts Engine
amarok: library : libamarok_artsengine_plugin
amarok: desktopEntryPath : amarok_artsengine_plugin.desktop
amarok: X-KDE-amaroK-plugintype : engine
amarok: X-KDE-amaroK-name : arts-engine
amarok: X-KDE-amaroK-authors : (Mark Kretschmann)
amarok: X-KDE-amaroK-rank : 200
amarok: X-KDE-amaroK-version : 1
amarok: X-KDE-amaroK-framework-version: 3
amarok:
amarok: WARNING: aRtsd not running.. trying to start
Launched ok, pid = 6782
ALSA lib pcm_hw.c:549snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pi pe
ALSA lib pcm_hw.c:549snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pi pe
ALSA lib pcm_hw.c:549snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pi pe
amarok: [PluginManager] Unloading library: libamarok_void-engine_plugin
[amaroK loader] startup successful.
[amaroK loader] exiting.
[dawid@localhost mp3]$ QColor::setRgb: RGB parameter(s) out of range
QColor::setRgb: RGB parameter(s) out of range
QColor::setRgb: RGB parameter(s) out of range
[dawid@localhost mp3]$

anybody knows what's going on?