smbprint works but lpr fails?
Howdy Y'all;
smbprint seems to be working fine, but; my lpr to smbprint fails. "lpr -Pshp4 /root/bua1.log" from PC netserver to PC michelle fails but "cat /root/bua1.log | smbprint" works.
[root@netserver ~]# uname -a
Linux netserver.medsamerica.com 2.2.9-19mdk #1 Wed May 19 19:53:00 GMT 1999 i586 unknown
[root@netserver ~]# cat /etc/issue
Linux Mandrake release 6.0 (Venus)
Kernel 2.2.9-19mdk on an i586
root@Michelle:/var/log/samba# uname -a
Linux Michelle 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 2007 i686 GNU/Linux
root@Michelle:/var/log/samba# cat /etc/issue
Ubuntu 7.04 \n \l
[root@netserver ~]# lpc status shp4
shp4:
queuing is enabled
printing is enabled
no entries
no daemon present
//netserver/etc/printcap:
shp4:shp4:SMB HP4 on PC Michelle: \
:mx#0:\
:lp=/dev/shp4:\
:sd=/var/spool/lpd/shp4:\
:af=/var/spool/lpd/shp4/acct:\
:if=/usr/bin/smbprint:
//netserver/var/log/messages:
Oct 31 09:20:55 netserver lpd[14352]: restarting shp4
Oct 31 09:20:57 netserver last message repeated 3 times
Oct 31 09:20:58 netserver lpd[14352]: shp4: job could not be printed (cfA000AzXH6Pj)
Oct 31 09:26:22 netserver kernel: parport0: PC-style at 0x378 [SPP,ECP,ECPPS2]
Oct 31 09:26:23 netserver kernel: parport0: no IEEE-1284 device present.
Oct 31 09:26:23 netserver kernel: lp0: using parport0 (polling).
Oct 31 09:26:24 netserver kernel: lp0 off-line
Any suggestions you have are much appreciated!
Dale E. Moore
|