Linux - Wireless NetworkingThis forum is for the discussion of wireless networking in Linux.
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Introduction to Linux - A Hands on Guide
This guide was created as an overview of the Linux Operating System, geared toward new users as an exploration tour and getting started guide, with exercises at the end of each chapter.
For more advanced trainees it can be a desktop reference, and a collection of the base knowledge needed to proceed with system and network administration. This book contains many real life examples derived from the author's experience as a Linux system and network administrator, trainer and consultant. They hope these examples will help you to get a better understanding of the Linux system and that you feel encouraged to try out things on your own.
Click Here to receive this Complete Guide absolutely free.
I have a Dynex DX-EBDTC pci wireless internet card. I used it with XP and it worked fine. On linux i cant make it work. I have downloaded ndiswrapper and tried it and it didn't work. Can anyone point me to either an open source driver for it or a solution. I have the disk if that is helpful. thanks in advance
lspci # will tell us the pci devices you have in your system.
lsusb # will tell us the usb devices you have in your system.
ifconfig # will tell us what network interface cards you have on your system.
ifconfig -aiwconfig # will tell us which of your network interface cards has wireless capability
sudo iwlist <network-card> scan # this will use the <network-card> interface (that from the iwconfig command above) and scan for wireless routers that are accessible.
sudo iwconfig <network-card> essid <your-router-name> # assuming no security (the access point names will be provided by the previous iwlist command).
sudo dhclient # will attempt to get ip-address, subnet mask, dns server information automatically from your router assuming dhcp is turned on on your router.
Bus 005 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
eth0 Link encap:Ethernet HWaddr 00:13:20:c2:17:66
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)