This is the message I get when I start kdetv either from the desktop or a shell. The screen is totally black. Kdetv was working just fine. The problem seems to have started when I installed jre.

[mike@localhost mike]$ kdetv
kdetv: WARNING: Sourcemanager: No screenwidget set! Cannot scan video plugins!
kdetv: WARNING: OSDManager: No screenwidget set! Cannot scan OSD plugins!
kdetv: WARNING: MiscManager: No screenwidget set! Cannot scan Misc plugins!
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000
/dev/video [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000
/dev/v4l/video0 [v4l2]: configuration done
Try to open v4l2 vbi device, libzvbi interface rev.
$Id: io-v4l2.c,v 1.25 2004/02/18 07:56:45 mschimek Exp $Opened /dev/vbi
Try to open v4l2 (2002-10) vbi device, libzvbi interface rev.
$Id: io-v4l2k.c,v 1.18 2004/04/09 05:18:16 mschimek Exp $Opened /dev/vbi
/dev/vbi (BT878 video (Pinnacle PCTV Stud) is a v4l2 vbi device,
driver bttv, version 0x0000090f
Current scanning system is 525
Querying current vbi parameters... success
VBI capture parameters granted: format 59455247, 28636363 Hz, 2048 bpl, offs 244, F1 10+16, F2 273+16, flags 00000000
Nyquist check passed
Request decoding of services 0x60000c7f
Will decode services 0x00000860
Using streaming interface
Fifo initialized
Requesting streaming i/o buffers
Mapping 16 streaming i/o buffers
Successful opened /dev/vbi (BT878 video (Pinnacle PCTV Stud)
QMetaObject::findSignal:ChannelEditor: Conflict with QListView::doubleClicked(QListViewItem*,const QPoint&,int)
kdetv: WARNING: MainWindow::setupInfraRed(): Lirc not available
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000
/dev/video [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000
/dev/v4l/video0 [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000
/dev/video [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000
/dev/video [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000
/dev/v4l/video0 [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000
/dev/v4l/video0 [v4l2]: configuration done
V4LGrabber::~V4LGrabber(): wait().
V4LGrabber::~V4LGrabber(): deleted.
QColor::setRgb: RGB parameter(s) out of range


Thanks in advance for your help.

Mikeinanson

P.S. If I posted this in the wrong forum please let me know.