kdetv black screen
This is the message I get when I start kdetv either from the desktop or a shell. The screen is totally black. Kdetv was working just fine. The problem seems to have started when I installed jre.
[mike@localhost mike]$ kdetv kdetv: WARNING: Sourcemanager: No screenwidget set! Cannot scan video plugins! kdetv: WARNING: OSDManager: No screenwidget set! Cannot scan OSD plugins! kdetv: WARNING: MiscManager: No screenwidget set! Cannot scan Misc plugins! kv4lsetup: using X11 display :0.0 dga: version 2.0 mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000 /dev/video [v4l2]: configuration done kv4lsetup: using X11 display :0.0 dga: version 2.0 mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000 /dev/v4l/video0 [v4l2]: configuration done Try to open v4l2 vbi device, libzvbi interface rev. $Id: io-v4l2.c,v 1.25 2004/02/18 07:56:45 mschimek Exp $Opened /dev/vbi Try to open v4l2 (2002-10) vbi device, libzvbi interface rev. $Id: io-v4l2k.c,v 1.18 2004/04/09 05:18:16 mschimek Exp $Opened /dev/vbi /dev/vbi (BT878 video (Pinnacle PCTV Stud) is a v4l2 vbi device, driver bttv, version 0x0000090f Current scanning system is 525 Querying current vbi parameters... success VBI capture parameters granted: format 59455247, 28636363 Hz, 2048 bpl, offs 244, F1 10+16, F2 273+16, flags 00000000 Nyquist check passed Request decoding of services 0x60000c7f Will decode services 0x00000860 Using streaming interface Fifo initialized Requesting streaming i/o buffers Mapping 16 streaming i/o buffers Successful opened /dev/vbi (BT878 video (Pinnacle PCTV Stud) QMetaObject::findSignal:ChannelEditor: Conflict with QListView::doubleClicked(QListViewItem*,const QPoint&,int) kdetv: WARNING: MainWindow::setupInfraRed(): Lirc not available kv4lsetup: using X11 display :0.0 dga: version 2.0 mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000 /dev/video [v4l2]: configuration done kv4lsetup: using X11 display :0.0 dga: version 2.0 mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000 /dev/v4l/video0 [v4l2]: configuration done kv4lsetup: using X11 display :0.0 dga: version 2.0 mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000 /dev/video [v4l2]: configuration done kv4lsetup: using X11 display :0.0 dga: version 2.0 mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000 /dev/video [v4l2]: configuration done kv4lsetup: using X11 display :0.0 dga: version 2.0 mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000 /dev/v4l/video0 [v4l2]: configuration done kv4lsetup: using X11 display :0.0 dga: version 2.0 mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xc0000000 /dev/v4l/video0 [v4l2]: configuration done V4LGrabber::~V4LGrabber(): wait(). V4LGrabber::~V4LGrabber(): deleted. QColor::setRgb: RGB parameter(s) out of range Thanks in advance for your help. Mikeinanson P.S. If I posted this in the wrong forum please let me know. |
All times are GMT -5. The time now is 11:46 PM. |