cool man!!

these links will bve helpfull for all from INDIA,where we have a lot of CDMA users connecting to the internet

regards

I am using a usb cable for LG LSP-350R phone

#/etc/wvdial.conf



[Modem0]
Modem= /dev/ttyACM0
Baud= 115200
SetVolume= 0
Dial Command = ATDT
Init1 = ATZ
Init3 = ATM0
FlowControl= CRTSCTS
[Dialer Reliance]
Username = myphone no
Password = myphone no
Phone = #777
Stupid Mode = 1
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Inherits = Modem0



#Console



[root@localhost ~]# modprobe uhci
[root@localhost ~]# modprobe usbserial
[root@localhost ~]# modprobe ftdi_sio

# 1) With the data baud on phone set to usb

[root@localhost ~]# wvdial Reliance
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: ATM0
ATM0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER

# "Async Data" is being displayed on the phone display and is connectiong and disconnecting


# 2) After Changing the data baud on phone to 115200


[root@localhost ~]# wvdial Reliance
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.

# No response on the phone




# Diagnostics report on working Win xp

ATQ0V1E0 - OK
AT+GMM - +GMM: LSP-350
AT+FCLASS=? - 0,2.0
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - COMMAND NOT SUPPORTED
AT+GCI=? - COMMAND NOT SUPPORTED
ATI1 - OK
ATI2 - OK
ATI3 - OK
ATI4 - OK
ATI5 - OK
ATI6 - OK
ATI7 - OK

Extra Initialization command
AT+CRM=1;$LGPKT=3

type the output of this unplug your phone then as a root do this #tail -f /var/log/messages plug in your phone and tell me what changes u see inthat command above

also doa google for

mknod ACM0